#include <linux/module.h>
#define INCLUDE_VERMAGIC
#include <linux/build-salt.h>
#include <linux/elfnote-lto.h>
#include <linux/export-internal.h>
#include <linux/vermagic.h>
#include <linux/compiler.h>

BUILD_SALT;
BUILD_LTO_INFO;

MODULE_INFO(vermagic, VERMAGIC_STRING);
MODULE_INFO(name, KBUILD_MODNAME);

__visible struct module __this_module
__section(".gnu.linkonce.this_module") = {
	.name = KBUILD_MODNAME,
	.arch = MODULE_ARCH_INIT,
};

MODULE_INFO(intree, "Y");

#ifdef CONFIG_RETPOLINE
MODULE_INFO(retpoline, "Y");
#endif

SYMBOL_CRC(st_accel_get_settings, 0xcf9d4fb8, "");
SYMBOL_CRC(st_accel_common_probe, 0xd87e5808, "");

static const struct modversion_info ____versions[]
__used __section("__versions") = {
	{ 0xefbebda7, "st_sensors_sysfs_scale_avail" },
	{ 0x2b3c5b17, "devm_iio_triggered_buffer_setup_ext" },
	{ 0x1cfba015, "stackleak_track_stack" },
	{ 0x37a0cba, "kfree" },
	{ 0x4ddf0d50, "__dynamic_dev_dbg" },
	{ 0x4325162f, "st_sensors_set_odr" },
	{ 0xbdfb6dbb, "__fentry__" },
	{ 0x9881f94, "st_sensors_get_settings_index" },
	{ 0xe9fae297, "st_sensors_debugfs_reg_access" },
	{ 0xa8d1337e, "_dev_info" },
	{ 0x4c7f292d, "iio_show_mount_matrix" },
	{ 0xbaf0dfa6, "st_sensors_init_sensor" },
	{ 0x7de8890f, "__devm_iio_device_register" },
	{ 0x4cf44638, "iio_read_mount_matrix" },
	{ 0xd7d64f88, "st_sensors_validate_device" },
	{ 0xb024ade4, "_dev_warn" },
	{ 0x5b8239ca, "__x86_return_thunk" },
	{ 0x6696d0d0, "st_sensors_set_fullscale_by_gain" },
	{ 0xde8c4f55, "st_sensors_allocate_trigger" },
	{ 0xdeb5a3d5, "st_sensors_sysfs_sampling_frequency_avail" },
	{ 0xd92deb6b, "acpi_evaluate_object" },
	{ 0x74d7047, "st_sensors_trigger_handler" },
	{ 0xbb53d55a, "st_sensors_set_enable" },
	{ 0x650765f8, "st_sensors_set_dataready_irq" },
	{ 0x2fbe8eff, "is_acpi_device_node" },
	{ 0xe09f838, "st_sensors_read_info_raw" },
	{ 0x208d1c65, "st_sensors_set_axis_enable" },
	{ 0x38d12457, "st_sensors_verify_id" },
	{ 0x7098e516, "module_layout" },
};

MODULE_INFO(depends, "st_sensors,industrialio-triggered-buffer,industrialio");