// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2008 * Guennadi Liakhovetski, DENX Software Engineering, * * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define MX3FB_NAME "mx3_sdc_fb" #define MX3FB_REG_OFFSET 0xB4 /* SDC Registers */ #define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET) #define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET) #define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET) #define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET) #define SDC_CUR_POS (0xC4 - MX3FB_REG_OFFSET) #define SDC_PWM_CTRL (0xC8 - MX3FB_REG_OFFSET) #define SDC_CUR_MAP (0xCC - MX3FB_REG_OFFSET) #define SDC_HOR_CONF (0xD0 - MX3FB_REG_OFFSET) #define SDC_VER_CONF (0xD4 - MX3FB_REG_OFFSET) #define SDC_SHARP_CONF_1 (0xD8 - MX3FB_REG_OFFSET) #define SDC_SHARP_CONF_2 (0xDC - MX3FB_REG_OFFSET) /* Register bits */ #define SDC_COM_TFT_COLOR 0x00000001UL #define SDC_COM_FG_EN 0x00000010UL #define SDC_COM_GWSEL 0x00000020UL #define SDC_COM_GLB_A 0x00000040UL #define SDC_COM_KEY_COLOR_G 0x00000080UL #define SDC_COM_BG_EN 0x00000200UL #define SDC_COM_SHARP 0x00001000UL #define SDC_V_SYNC_WIDTH_L 0x00000001UL /* Display Interface registers */ #define DI_DISP_IF_CONF (0x0124 - MX3FB_REG_OFFSET) #define DI_DISP_SIG_POL (0x0128 - MX3FB_REG_OFFSET) #define DI_SER_DISP1_CONF (0x012C - MX3FB_REG_OFFSET) #define DI_SER_DISP2_CONF (0x0130 - MX3FB_REG_OFFSET) #define DI_HSP_CLK_PER (0x0134 - MX3FB_REG_OFFSET) #define DI_DISP0_TIME_CONF_1 (0x0138 - MX3FB_REG_OFFSET) #define DI_DISP0_TIME_CONF_2 (0x013C - MX3FB_REG_OFFSET) #define DI_DISP0_TIME_CONF_3 (0x0140 - MX3FB_REG_OFFSET) #define DI_DISP1_TIME_CONF_1 (0x0144 - MX3FB_REG_OFFSET) #define DI_DISP1_TIME_CONF_2 (0x0148 - MX3FB_REG_OFFSET) #define DI_DISP1_TIME_CONF_3 (0x014C - MX3FB_REG_OFFSET) #define DI_DISP2_TIME_CONF_1 (0x0150 - MX3FB_REG_OFFSET) #define DI_DISP2_TIME_CONF_2 (0x0154 - MX3FB_REG_OFFSET) #define DI_DISP2_TIME_CONF_3 (0x0158 - MX3FB_REG_OFFSET) #define DI_DISP3_TIME_CONF (0x015C - MX3FB_REG_OFFSET) #define DI_DISP0_DB0_MAP (0x0160 - MX3FB_REG_OFFSET) #define DI_DISP0_DB1_MAP (0x0164 - MX3FB_REG_OFFSET) #define DI_DISP0_DB2_MAP (0x0168 - MX3FB_REG_OFFSET) #define DI_DISP0_CB0_MAP (0x016C - MX3FB_REG_OFFSET) #define DI_DISP0_CB1_MAP (0x0170 - MX3FB_REG_OFFSET) #define DI_DISP0_CB2_MAP (0x0174 - MX3FB_REG_OFFSET) #define DI_DISP1_DB0_MAP (0x0178 - MX3FB_REG_OFFSET) #define DI_DISP1_DB1_MAP (0x017C - MX3FB_REG_OFFSET) #define DI_DISP1_DB2_MAP (0x0180 - MX3FB_REG_OFFSET) #define DI_DISP1_CB0_MAP (0x0184 - MX3FB_REG_OFFSET) #define DI_DISP1_CB1_MAP (0x0188 - MX3FB_REG_OFFSET) #define DI_DISP1_CB2_MAP (0x018C - MX3FB_REG_OFFSET) #define DI_DISP2_DB0_MAP (0x0190 - MX3FB_REG_OFFSET) #define DI_DISP2_DB1_MAP (0x0194 - MX3FB_REG_OFFSET) #define DI_DISP2_DB2_MAP (0x0198 - MX3FB_REG_OFFSET) #define DI_DISP2_CB0_MAP (0x019C - MX3FB_REG_OFFSET) #define DI_DISP2_CB1_MAP (0x01A0 - MX3FB_REG_OFFSET) #define DI_DISP2_CB2_MAP (0x01A4 - MX3FB_REG_OFFSET) #define DI_DISP3_B0_MAP (0x01A8 - MX3FB_REG_OFFSET) #define DI_DISP3_B1_MAP (0x01AC - MX3FB_REG_OFFSET) #define DI_DISP3_B2_MAP (0x01B0 - MX3FB_REG_OFFSET) #define DI_DISP_ACC_CC (0x01B4 - MX3FB_REG_OFFSET) #define DI_DISP_LLA_CONF (0x01B8 - MX3FB_REG_OFFSET) #define DI_DISP_LLA_DATA (0x01BC - MX3FB_REG_OFFSET) /* DI_DISP_SIG_POL bits */ #define DI_D3_VSYNC_POL_SHIFT 28 #define DI_D3_HSYNC_POL_SHIFT 27 #define DI_D3_DRDY_SHARP_POL_SHIFT 26 #define DI_D3_CLK_POL_SHIFT 25 #define DI_D3_DATA_POL_SHIFT 24 /* DI_DISP_IF_CONF bits */ #define DI_D3_CLK_IDLE_SHIFT 26 #define DI_D3_CLK_SEL_SHIFT 25 #define DI_D3_DATAMSK_SHIFT 24 enum ipu_panel { IPU_PANEL_SHARP_TFT, IPU_PANEL_TFT, }; struct ipu_di_signal_cfg { unsigned datamask_en:1; unsigned clksel_en:1; unsigned clkidle_en:1; unsigned data_pol:1; /* true = inverted */ unsigned clk_pol:1; /* true = rising edge */ unsigned enable_pol:1; unsigned Hsync_pol:1; /* true = active high */ unsigned Vsync_pol:1; }; static const struct fb_videomode mx3fb_modedb[] = { { /* 240x320 @ 60 Hz */ .name = "Sharp-QVGA", .refresh = 60, .xres = 240, .yres = 320, .pixclock = 185925, .left_margin = 9, .right_margin = 16, .upper_margin = 7, .lower_margin = 9, .hsync_len = 1, .vsync_len = 1, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | FB_SYNC_CLK_IDLE_EN, .vmode = FB_VMODE_NONINTERLACED, .flag = 0, }, { /* 240x33 @ 60 Hz */ .name = "Sharp-CLI", .refresh = 60, .xres = 240, .yres = 33, .pixclock = 185925, .left_margin = 9, .right_margin = 16, .upper_margin = 7, .lower_margin = 9 + 287, .hsync_len = 1, .vsync_len = 1, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | FB_SYNC_CLK_IDLE_EN, .vmode = FB_VMODE_NONINTERLACED, .flag = 0, }, { /* 640x480 @ 60 Hz */ .name = "NEC-VGA", .refresh = 60, .xres = 640, .yres = 480, .pixclock = 38255, .left_margin = 144, .right_margin = 0, .upper_margin = 34, .lower_margin = 40, .hsync_len = 1, .vsync_len = 1, .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, .vmode = FB_VMODE_NONINTERLACED, .flag = 0, }, { /* NTSC TV output */ .name = "TV-NTSC", .refresh = 60, .xres = 640, .yres = 480, .pixclock = 37538, .left_margin = 38, .right_margin = 858 - 640 - 38 - 3, .upper_margin = 36, .lower_margin = 518 - 480 - 36 - 1, .hsync_len = 3, .vsync_len = 1, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, .flag = 0, }, { /* PAL TV output */ .name = "TV-PAL", .refresh = 50, .xres = 640, .yres = 480, .pixclock = 37538, .left_margin = 38, .right_margin = 960 - 640 - 38 - 32, .upper_margin = 32, .lower_margin = 555 - 480 - 32 - 3, .hsync_len = 32, .vsync_len = 3, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, .flag = 0, }, { /* TV output VGA mode, 640x480 @ 65 Hz */ .name = "TV-VGA", .refresh = 60, .xres = 640, .yres = 480, .pixclock = 40574, .left_margin = 35, .right_margin = 45, .upper_margin = 9, .lower_margin = 1, .hsync_len = 46, .vsync_len = 5, .sync = 0, .vmode = FB_VMODE_NONINTERLACED, .flag = 0, }, }; struct mx3fb_data { struct fb_info *fbi; int backlight_level; void __iomem *reg_base; spinlock_t lock; struct device *dev; struct backlight_device *bl; uint32_t h_start_width; uint32_t v_start_width; enum disp_data_mapping disp_data_fmt; }; struct dma_chan_request { struct mx3fb_data *mx3fb; enum ipu_channel id; }; /* MX3 specific framebuffer information. */ struct mx3fb_info { int blank; enum ipu_channel ipu_ch; uint32_t cur_ipu_buf; u32 pseudo_palette[16]; struct completion flip_cmpl; struct mutex mutex; /* Protects fb-ops */ struct mx3fb_data *mx3fb; struct idmac_channel *idmac_channel; struct dma_async_tx_descriptor *txd; dma_cookie_t cookie; struct scatterlist sg[2]; struct fb_var_screeninfo cur_var; /* current var info */ }; static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value); static u32 sdc_get_brightness(struct mx3fb_data *mx3fb); static int mx3fb_bl_get_brightness(struct backlight_device *bl) { struct mx3fb_data *fbd = bl_get_data(bl); return sdc_get_brightness(fbd); } static int mx3fb_bl_update_status(struct backlight_device *bl) { struct mx3fb_data *fbd = bl_get_data(bl); int brightness = backlight_get_brightness(bl); fbd->backlight_level = (fbd->backlight_level & ~0xFF) | brightness; sdc_set_brightness(fbd, fbd->backlight_level); return 0; } static const struct backlight_ops mx3fb_lcdc_bl_ops = { .update_status = mx3fb_bl_update_status, .get_brightness = mx3fb_bl_get_brightness, }; static void mx3fb_init_backlight(struct mx3fb_data *fbd) { struct backlight_properties props; struct backlight_device *bl; if (fbd->bl) return; memset(&props, 0, sizeof(struct backlight_properties)); props.max_brightness = 0xff; props.type = BACKLIGHT_RAW; sdc_set_brightness(fbd, fbd->backlight_level); bl = backlight_device_register("mx3fb-bl", fbd->dev, fbd, &mx3fb_lcdc_bl_ops, &props); if (IS_ERR(bl)) { dev_err(fbd->dev, "error %ld on backlight register\n", PTR_ERR(bl)); return; } fbd->bl = bl; bl->props.power = FB_BLANK_UNBLANK; bl->props.fb_blank = FB_BLANK_UNBLANK; bl->props.brightness = mx3fb_bl_get_brightness(bl); } static void mx3fb_exit_backlight(struct mx3fb_data *fbd) { backlight_device_unregister(fbd->bl); } static void mx3fb_dma_done(void *); /* Used fb-mode and bpp. Can be set on kernel command line, therefore file-static. */ static const char *fb_mode; static unsigned long default_bpp = 16; static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg) { return __raw_readl(mx3fb->reg_base + reg); } static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg) { __raw_writel(value, mx3fb->reg_base + reg); } struct di_mapping { uint32_t b0, b1, b2; }; static const struct di_mapping di_mappings[] = { [IPU_DISP_DATA_MAPPING_RGB666] = { 0x0005000f, 0x000b000f, 0x0011000f }, [IPU_DISP_DATA_MAPPING_RGB565] = { 0x0004003f, 0x000a000f, 0x000f003f }, [IPU_DISP_DATA_MAPPING_RGB888] = { 0x00070000, 0x000f0000, 0x00170000 }, }; static void sdc_fb_init(struct mx3fb_info *fbi) { struct mx3fb_data *mx3fb = fbi->mx3fb; uint32_t reg; reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF); } /* Returns enabled flag before uninit */ static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi) { struct mx3fb_data *mx3fb = fbi->mx3fb; uint32_t reg; reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF); return reg & SDC_COM_BG_EN; } static void sdc_enable_channel(struct mx3fb_info *mx3_fbi) { struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; struct idmac_channel *ichan = mx3_fbi->idmac_channel; struct dma_chan *dma_chan = &ichan->dma_chan; unsigned long flags; dma_cookie_t cookie; if (mx3_fbi->txd) dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi, to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg); else dev_dbg(mx3fb->dev, "mx3fbi %p, txd = NULL\n", mx3_fbi); /* This enables the channel */ if (mx3_fbi->cookie < 0) { mx3_fbi->txd = dmaengine_prep_slave_sg(dma_chan, &mx3_fbi->sg[0], 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); if (!mx3_fbi->txd) { dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n", dma_chan->chan_id); return; } mx3_fbi->txd->callback_param = mx3_fbi->txd; mx3_fbi->txd->callback = mx3fb_dma_done; cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd); dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__, mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); } else { if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) { dev_err(mx3fb->dev, "Cannot enable channel %d\n", dma_chan->chan_id); return; } /* Just re-activate the same buffer */ dma_async_issue_pending(dma_chan); cookie = mx3_fbi->cookie; dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__, mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); } if (cookie >= 0) { spin_lock_irqsave(&mx3fb->lock, flags); sdc_fb_init(mx3_fbi); mx3_fbi->cookie = cookie; spin_unlock_irqrestore(&mx3fb->lock, flags); } /* * Attention! Without this msleep the channel keeps generating * interrupts. Next sdc_set_brightness() is going to be called * from mx3fb_blank(). */ msleep(2); } static void sdc_disable_channel(struct mx3fb_info *mx3_fbi) { struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; unsigned long flags; if (mx3_fbi->txd == NULL) return; spin_lock_irqsave(&mx3fb->lock, flags); sdc_fb_uninit(mx3_fbi); spin_unlock_irqrestore(&mx3fb->lock, flags); dmaengine_terminate_all(mx3_fbi->txd->chan); mx3_fbi->txd = NULL; mx3_fbi->cookie = -EINVAL; } /** * sdc_set_window_pos() - set window position of the respective plane. * @mx3fb: mx3fb context. * @channel: IPU DMAC channel ID. * @x_pos: X coordinate relative to the top left corner to place window at. * @y_pos: Y coordinate relative to the top left corner to place window at. * @return: 0 on success or negative error code on failure. */ static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel, int16_t x_pos, int16_t y_pos) { if (channel != IDMAC_SDC_0) return -EINVAL; x_pos += mx3fb->h_start_width; y_pos += mx3fb->v_start_width; mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS); return 0; } /** * sdc_init_panel() - initialize a synchronous LCD panel. * @mx3fb: mx3fb context. * @panel: panel type. * @pixel_clk: desired pixel clock frequency in Hz. * @width: width of panel in pixels. * @height: height of panel in pixels. * @h_start_width: number of pixel clocks between the HSYNC signal pulse * and the start of valid data. * @h_sync_width: width of the HSYNC signal in units of pixel clocks. * @h_end_width: number of pixel clocks between the end of valid data * and the HSYNC signal for next line. * @v_start_width: number of lines between the VSYNC signal pulse and the * start of valid data. * @v_sync_width: width of the VSYNC signal in units of lines * @v_end_width: number of lines between the end of valid data and the * VSYNC signal for next frame. * @sig: bitfield of signal polarities for LCD interface. * @return: 0 on success or negative error code on failure. */ static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel, uint32_t pixel_clk, uint16_t width, uint16_t height, uint16_t h_start_width, uint16_t h_sync_width, uint16_t h_end_width, uint16_t v_start_width, uint16_t v_sync_width, uint16_t v_end_width, const struct ipu_di_signal_cfg *sig) { unsigned long lock_flags; uint32_t reg; uint32_t old_conf; uint32_t div; struct clk *ipu_clk; const struct di_mapping *map; dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height); if (v_sync_width == 0 || h_sync_width == 0) return -EINVAL; /* Init panel size and blanking periods */ reg = ((uint32_t) (h_sync_width - 1) << 26) | ((uint32_t) (width + h_start_width + h_end_width - 1) << 16); mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF); #ifdef DEBUG printk(KERN_CONT " hor_conf %x,", reg); #endif reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L | ((uint32_t) (height + v_start_width + v_end_width - 1) << 16); mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF); #ifdef DEBUG printk(KERN_CONT " ver_conf %x\n", reg); #endif mx3fb->h_start_width = h_start_width; mx3fb->v_start_width = v_start_width; switch (panel) { case IPU_PANEL_SHARP_TFT: mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1); mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2); mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF); break; case IPU_PANEL_TFT: mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF); break; default: return -EINVAL; } /* Init clocking */ /* * Calculate divider: fractional part is 4 bits so simply multiple by * 2^4 to get fractional part, as long as we stay under ~250MHz and on * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz */ ipu_clk = clk_get(mx3fb->dev, NULL); if (!IS_ERR(ipu_clk)) { div = clk_get_rate(ipu_clk) * 16 / pixel_clk; clk_put(ipu_clk); } else { div = 0; } if (div < 0x40) { /* Divider less than 4 */ dev_dbg(mx3fb->dev, "InitPanel() - Pixel clock divider less than 4\n"); div = 0x40; } dev_dbg(mx3fb->dev, "pixel clk = %u, divider %u.%u\n", pixel_clk, div >> 4, (div & 7) * 125); spin_lock_irqsave(&mx3fb->lock, lock_flags); /* * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing * debug. DISP3_IF_CLK_UP_WR is 0 */ mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF); /* DI settings */ old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF; old_conf |= sig->datamask_en << DI_D3_DATAMSK_SHIFT | sig->clksel_en << DI_D3_CLK_SEL_SHIFT | sig->clkidle_en << DI_D3_CLK_IDLE_SHIFT; mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF); old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF; old_conf |= sig->data_pol << DI_D3_DATA_POL_SHIFT | sig->clk_pol << DI_D3_CLK_POL_SHIFT | sig->enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT | sig->Hsync_pol << DI_D3_HSYNC_POL_SHIFT | sig->Vsync_pol << DI_D3_VSYNC_POL_SHIFT; mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL); map = &di_mappings[mx3fb->disp_data_fmt]; mx3fb_write_reg(mx3fb, map->b0, DI_DISP3_B0_MAP); mx3fb_write_reg(mx3fb, map->b1, DI_DISP3_B1_MAP); mx3fb_write_reg(mx3fb, map->b2, DI_DISP3_B2_MAP); spin_unlock_irqrestore(&mx3fb->lock, lock_flags); dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n", mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF)); dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n", mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL)); dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n", mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF)); return 0; } /** * sdc_set_color_key() - set the transparent color key for SDC graphic plane. * @mx3fb: mx3fb context. * @channel: IPU DMAC channel ID. * @enable: boolean to enable or disable color keyl. * @color_key: 24-bit RGB color to use as transparent color key. * @return: 0 on success or negative error code on failure. */ static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel, bool enable, uint32_t color_key) { uint32_t reg, sdc_conf; unsigned long lock_flags; spin_lock_irqsave(&mx3fb->lock, lock_flags); sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF); if (channel == IDMAC_SDC_0) sdc_conf &= ~SDC_COM_GWSEL; else sdc_conf |= SDC_COM_GWSEL; if (enable) { reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L; mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL), SDC_GW_CTRL); sdc_conf |= SDC_COM_KEY_COLOR_G; } else { sdc_conf &= ~SDC_COM_KEY_COLOR_G; } mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF); spin_unlock_irqrestore(&mx3fb->lock, lock_flags); return 0; } /** * sdc_set_global_alpha() - set global alpha blending modes. * @mx3fb: mx3fb context. * @enable: boolean to enable or disable global alpha blending. If disabled, * per pixel blending is used. * @alpha: global alpha value. * @return: 0 on success or negative error code on failure. */ static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha) { uint32_t reg; unsigned long lock_flags; spin_lock_irqsave(&mx3fb->lock, lock_flags); if (enable) { reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL; mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL); reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF); } else { reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF); } spin_unlock_irqrestore(&mx3fb->lock, lock_flags); return 0; } static u32 sdc_get_brightness(struct mx3fb_data *mx3fb) { u32 brightness; brightness = mx3fb_read_reg(mx3fb, SDC_PWM_CTRL); brightness = (brightness >> 16) & 0xFF; return brightness; } static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value) { dev_dbg(mx3fb->dev, "%s: value = %d\n", __func__, value); /* This might be board-specific */ mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL); return; } static uint32_t bpp_to_pixfmt(int bpp) { uint32_t pixfmt = 0; switch (bpp) { case 24: pixfmt = IPU_PIX_FMT_BGR24; break; case 32: pixfmt = IPU_PIX_FMT_BGR32; break; case 16: pixfmt = IPU_PIX_FMT_RGB565; break; } return pixfmt; } static int mx3fb_blank(int blank, struct fb_info *fbi); static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len, bool lock); static int mx3fb_unmap_video_memory(struct fb_info *fbi); /** * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings. * @fbi: framebuffer information pointer * @return: 0 on success or negative error code on failure. */ static int mx3fb_set_fix(struct fb_info *fbi) { struct fb_fix_screeninfo *fix = &fbi->fix; struct fb_var_screeninfo *var = &fbi->var; memcpy(fix->id, "DISP3 BG", 8); fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; fix->type = FB_TYPE_PACKED_PIXELS; fix->accel = FB_ACCEL_NONE; fix->visual = FB_VISUAL_TRUECOLOR; fix->xpanstep = 1; fix->ypanstep = 1; return 0; } static void mx3fb_dma_done(void *arg) { struct idmac_tx_desc *tx_desc = to_tx_desc(arg); struct dma_chan *chan = tx_desc->txd.chan; struct idmac_channel *ichannel = to_idmac_chan(chan); struct mx3fb_data *mx3fb = ichannel->client; struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq); /* We only need one interrupt, it will be re-enabled as needed */ disable_irq_nosync(ichannel->eof_irq); complete(&mx3_fbi->flip_cmpl); } static bool mx3fb_must_set_par(struct fb_info *fbi) { struct mx3fb_info *mx3_fbi = fbi->par; struct fb_var_screeninfo old_var = mx3_fbi->cur_var; struct fb_var_screeninfo new_var = fbi->var; if ((fbi->var.activate & FB_ACTIVATE_FORCE) && (fbi->var.activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) return true; /* * Ignore xoffset and yoffset update, * because pan display handles this case. */ old_var.xoffset = new_var.xoffset; old_var.yoffset = new_var.yoffset; return !!memcmp(&old_var, &new_var, sizeof(struct fb_var_screeninfo)); } static int __set_par(struct fb_info *fbi, bool lock) { u32 mem_len, cur_xoffset, cur_yoffset; struct ipu_di_signal_cfg sig_cfg; enum ipu_panel mode = IPU_PANEL_TFT; struct mx3fb_info *mx3_fbi = fbi->par; struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; struct idmac_channel *ichan = mx3_fbi->idmac_channel; struct idmac_video_param *video = &ichan->params.video; struct scatterlist *sg = mx3_fbi->sg; /* Total cleanup */ if (mx3_fbi->txd) sdc_disable_channel(mx3_fbi); mx3fb_set_fix(fbi); mem_len = fbi->var.yres_virtual * fbi->fix.line_length; if (mem_len > fbi->fix.smem_len) { if (fbi->fix.smem_start) mx3fb_unmap_video_memory(fbi); if (mx3fb_map_video_memory(fbi, mem_len, lock) < 0) return -ENOMEM; } sg_init_table(&sg[0], 1); sg_init_table(&sg[1], 1); sg_dma_address(&sg[0]) = fbi->fix.smem_start; sg_set_page(&sg[0], virt_to_page(fbi->screen_base), fbi->fix.smem_len, offset_in_page(fbi->screen_base)); if (mx3_fbi->ipu_ch == IDMAC_SDC_0) { memset(&sig_cfg, 0, sizeof(sig_cfg)); if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT) sig_cfg.Hsync_pol = true; if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT) sig_cfg.Vsync_pol = true; if (fbi->var.sync & FB_SYNC_CLK_INVERT) sig_cfg.clk_pol = true; if (fbi->var.sync & FB_SYNC_DATA_INVERT) sig_cfg.data_pol = true; if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH) sig_cfg.enable_pol = true; if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN) sig_cfg.clkidle_en = true; if (fbi->var.sync & FB_SYNC_CLK_SEL_EN) sig_cfg.clksel_en = true; if (fbi->var.sync & FB_SYNC_SHARP_MODE) mode = IPU_PANEL_SHARP_TFT; dev_dbg(fbi->device, "pixclock = %u Hz\n", (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL)); if (sdc_init_panel(mx3fb, mode, (PICOS2KHZ(fbi->var.pixclock)) * 1000UL, fbi->var.xres, fbi->var.yres, fbi->var.left_margin, fbi->var.hsync_len, fbi->var.right_margin + fbi->var.hsync_len, fbi->var.upper_margin, fbi->var.vsync_len, fbi->var.lower_margin + fbi->var.vsync_len, &sig_cfg) != 0) { dev_err(fbi->device, "mx3fb: Error initializing panel.\n"); return -EINVAL; } } sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0); mx3_fbi->cur_ipu_buf = 0; video->out_pixel_fmt = bpp_to_pixfmt(fbi->var.bits_per_pixel); video->out_width = fbi->var.xres; video->out_height = fbi->var.yres; video->out_stride = fbi->var.xres_virtual; if (mx3_fbi->blank == FB_BLANK_UNBLANK) { sdc_enable_channel(mx3_fbi); /* * sg[0] points to fb smem_start address * and is actually active in controller. */ mx3_fbi->cur_var.xoffset = 0; mx3_fbi->cur_var.yoffset = 0; } /* * Preserve xoffset and yoffest in case they are * inactive in controller as fb is blanked. */ cur_xoffset = mx3_fbi->cur_var.xoffset; cur_yoffset = mx3_fbi->cur_var.yoffset; mx3_fbi->cur_var = fbi->var; mx3_fbi->cur_var.xoffset = cur_xoffset; mx3_fbi->cur_var.yoffset = cur_yoffset; return 0; } /** * mx3fb_set_par() - set framebuffer parameters and change the operating mode. * @fbi: framebuffer information pointer. * @return: 0 on success or negative error code on failure. */ static int mx3fb_set_par(struct fb_info *fbi) { struct mx3fb_info *mx3_fbi = fbi->par; struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; struct idmac_channel *ichan = mx3_fbi->idmac_channel; int ret; dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+'); mutex_lock(&mx3_fbi->mutex); ret = mx3fb_must_set_par(fbi) ? __set_par(fbi, true) : 0; mutex_unlock(&mx3_fbi->mutex); return ret; } /** * mx3fb_check_var() - check and adjust framebuffer variable parameters. * @var: framebuffer variable parameters * @fbi: framebuffer information pointer */ static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) { struct mx3fb_info *mx3_fbi = fbi->par; u32 vtotal; u32 htotal; dev_dbg(fbi->device, "%s\n", __func__); if (var->xres_virtual < var->xres) var->xres_virtual = var->xres; if (var->yres_virtual < var->yres) var->yres_virtual = var->yres; if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && (var->bits_per_pixel != 16)) var->bits_per_pixel = default_bpp; switch (var->bits_per_pixel) { case 16: var->red.length = 5; var->red.offset = 11; var->red.msb_right = 0; var->green.length = 6; var->green.offset = 5; var->green.msb_right = 0; var->blue.length = 5; var->blue.offset = 0; var->blue.msb_right = 0; var->transp.length = 0; var->transp.offset = 0; var->transp.msb_right = 0; break; case 24: var->red.length = 8; var->red.offset = 16; var->red.msb_right = 0; var->green.length = 8; var->green.offset = 8; var->green.msb_right = 0; var->blue.length = 8; var->blue.offset = 0; var->blue.msb_right = 0; var->transp.length = 0; var->transp.offset = 0; var->transp.msb_right = 0; break; case 32: var->red.length = 8; var->red.offset = 16; var->red.msb_right = 0; var->green.length = 8; var->green.offset = 8; var->green.msb_right = 0; var->blue.length = 8; var->blue.offset = 0; var->blue.msb_right = 0; var->transp.length = 8; var->transp.offset = 24; var->transp.msb_right = 0; break; } if (var->pixclock < 1000) { htotal = var->xres + var->right_margin + var->hsync_len + var->left_margin; vtotal = var->yres + var->lower_margin + var->vsync_len + var->upper_margin; var->pixclock = (vtotal * htotal * 6UL) / 100UL; var->pixclock = KHZ2PICOS(var->pixclock); dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n", var->pixclock); } var->height = -1; var->width = -1; var->grayscale = 0; /* Preserve sync flags */ var->sync |= mx3_fbi->cur_var.sync; mx3_fbi->cur_var.sync |= var->sync; return 0; } static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf) { chan &= 0xffff; chan >>= 16 - bf->length; return chan << bf->offset; } static int mx3fb_setcolreg(unsigned int regno, unsigned int red, unsigned int green, unsigned int blue, unsigned int trans, struct fb_info *fbi) { struct mx3fb_info *mx3_fbi = fbi->par; u32 val; int ret = 1; dev_dbg(fbi->device, "%s, regno = %u\n", __func__, regno); mutex_lock(&mx3_fbi->mutex); /* * If greyscale is true, then we convert the RGB value * to greyscale no matter what visual we are using. */ if (fbi->var.grayscale) red = green = blue = (19595 * red + 38470 * green + 7471 * blue) >> 16; switch (fbi->fix.visual) { case FB_VISUAL_TRUECOLOR: /* * 16-bit True Colour. We encode the RGB value * according to the RGB bitfield information. */ if (regno < 16) { u32 *pal = fbi->pseudo_palette; val = chan_to_field(red, &fbi->var.red); val |= chan_to_field(green, &fbi->var.green); val |= chan_to_field(blue, &fbi->var.blue); pal[regno] = val; ret = 0; } break; case FB_VISUAL_STATIC_PSEUDOCOLOR: case FB_VISUAL_PSEUDOCOLOR: break; } mutex_unlock(&mx3_fbi->mutex); return ret; } static void __blank(int blank, struct fb_info *fbi) { struct mx3fb_info *mx3_fbi = fbi->par; struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; int was_blank = mx3_fbi->blank; mx3_fbi->blank = blank; /* Attention! * Do not call sdc_disable_channel() for a channel that is disabled * already! This will result in a kernel NULL pointer dereference * (mx3_fbi->txd is NULL). Hide the fact, that all blank modes are * handled equally by this driver. */ if (blank > FB_BLANK_UNBLANK && was_blank > FB_BLANK_UNBLANK) return; switch (blank) { case FB_BLANK_POWERDOWN: case FB_BLANK_VSYNC_SUSPEND: case FB_BLANK_HSYNC_SUSPEND: case FB_BLANK_NORMAL: sdc_set_brightness(mx3fb, 0); memset((char *)fbi->screen_base, 0, fbi->fix.smem_len); /* Give LCD time to update - enough for 50 and 60 Hz */ msleep(25); sdc_disable_channel(mx3_fbi); break; case FB_BLANK_UNBLANK: sdc_enable_channel(mx3_fbi); sdc_set_brightness(mx3fb, mx3fb->backlight_level); break; } } /** * mx3fb_blank() - blank the display. * @blank: blank value for the panel * @fbi: framebuffer information pointer */ static int mx3fb_blank(int blank, struct fb_info *fbi) { struct mx3fb_info *mx3_fbi = fbi->par; dev_dbg(fbi->device, "%s, blank = %d, base %p, len %u\n", __func__, blank, fbi->screen_base, fbi->fix.smem_len); if (mx3_fbi->blank == blank) return 0; mutex_lock(&mx3_fbi->mutex); __blank(blank, fbi); mutex_unlock(&mx3_fbi->mutex); return 0; } /** * mx3fb_pan_display() - pan or wrap the display * @var: variable screen buffer information. * @fbi: framebuffer information pointer. * * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag */ static int mx3fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi) { struct mx3fb_info *mx3_fbi = fbi->par; u32 y_bottom; unsigned long base; off_t offset; dma_cookie_t cookie; struct scatterlist *sg = mx3_fbi->sg; struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan; struct dma_async_tx_descriptor *txd; int ret; dev_dbg(fbi->device, "%s [%c]\n", __func__, list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+'); if (var->xoffset > 0) { dev_dbg(fbi->device, "x panning not supported\n"); return -EINVAL; } if (mx3_fbi->cur_var.xoffset == var->xoffset && mx3_fbi->cur_var.yoffset == var->yoffset) return 0; /* No change, do nothing */ y_bottom = var->yoffset; if (!(var->vmode & FB_VMODE_YWRAP)) y_bottom += fbi->var.yres; if (y_bottom > fbi->var.yres_virtual) return -EINVAL; mutex_lock(&mx3_fbi->mutex); offset = var->yoffset * fbi->fix.line_length + var->xoffset * (fbi->var.bits_per_pixel / 8); base = fbi->fix.smem_start + offset; dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n", mx3_fbi->cur_ipu_buf, base); /* * We enable the End of Frame interrupt, which will free a tx-descriptor, * which we will need for the next dmaengine_prep_slave_sg(). The * IRQ-handler will disable the IRQ again. */ init_completion(&mx3_fbi->flip_cmpl); enable_irq(mx3_fbi->idmac_channel->eof_irq); ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10); if (ret <= 0) { mutex_unlock(&mx3_fbi->mutex); dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ? "user interrupt" : "timeout"); disable_irq(mx3_fbi->idmac_channel->eof_irq); return ret ? : -ETIMEDOUT; } mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf; sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base; sg_set_page(&sg[mx3_fbi->cur_ipu_buf], virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len, offset_in_page(fbi->screen_base + offset)); if (mx3_fbi->txd) async_tx_ack(mx3_fbi->txd); txd = dmaengine_prep_slave_sg(dma_chan, sg + mx3_fbi->cur_ipu_buf, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT); if (!txd) { dev_err(fbi->device, "Error preparing a DMA transaction descriptor.\n"); mutex_unlock(&mx3_fbi->mutex); return -EIO; } txd->callback_param = txd; txd->callback = mx3fb_dma_done; /* * Emulate original mx3fb behaviour: each new call to idmac_tx_submit() * should switch to another buffer */ cookie = txd->tx_submit(txd); dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie); if (cookie < 0) { dev_err(fbi->device, "Error updating SDC buf %d to address=0x%08lX\n", mx3_fbi->cur_ipu_buf, base); mutex_unlock(&mx3_fbi->mutex); return -EIO; } mx3_fbi->txd = txd; fbi->var.xoffset = var->xoffset; fbi->var.yoffset = var->yoffset; if (var->vmode & FB_VMODE_YWRAP) fbi->var.vmode |= FB_VMODE_YWRAP; else fbi->var.vmode &= ~FB_VMODE_YWRAP; mx3_fbi->cur_var = fbi->var; mutex_unlock(&mx3_fbi->mutex); dev_dbg(fbi->device, "Update complete\n"); return 0; } /* * This structure contains the pointers to the control functions that are * invoked by the core framebuffer driver to perform operations like * blitting, rectangle filling, copy regions and cursor definition. */ static const struct fb_ops mx3fb_ops = { .owner = THIS_MODULE, .fb_set_par = mx3fb_set_par, .fb_check_var = mx3fb_check_var, .fb_setcolreg = mx3fb_setcolreg, .fb_pan_display = mx3fb_pan_display, .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, .fb_blank = mx3fb_blank, }; #ifdef CONFIG_PM /* * Power management hooks. Note that we won't be called from IRQ context, * unlike the blank functions above, so we may sleep. */ /* * Suspends the framebuffer and blanks the screen. Power management support */ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) { struct mx3fb_data *mx3fb = platform_get_drvdata(pdev); struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; console_lock(); fb_set_suspend(mx3fb->fbi, 1); console_unlock(); if (mx3_fbi->blank == FB_BLANK_UNBLANK) { sdc_disable_channel(mx3_fbi); sdc_set_brightness(mx3fb, 0); } return 0; } /* * Resumes the framebuffer and unblanks the screen. Power management support */ static int mx3fb_resume(struct platform_device *pdev) { struct mx3fb_data *mx3fb = platform_get_drvdata(pdev); struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; if (mx3_fbi->blank == FB_BLANK_UNBLANK) { sdc_enable_channel(mx3_fbi); sdc_set_brightness(mx3fb, mx3fb->backlight_level); } console_lock(); fb_set_suspend(mx3fb->fbi, 0); console_unlock(); return 0; } #else #define mx3fb_suspend NULL #define mx3fb_resume NULL #endif /* * Main framebuffer functions */ /** * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer. * @fbi: framebuffer information pointer * @mem_len: length of mapped memory * @lock: do not lock during initialisation * @return: Error code indicating success or failure * * This buffer is remapped into a non-cached, non-buffered, memory region to * allow palette and pixel writes to occur without flushing the cache. Once this * area is remapped, all virtual memory access to the video memory should occur * at the new region. */ static int mx3fb_map_video_memory(struct fb_info *fbi, unsigned int mem_len, bool lock) { int retval = 0; dma_addr_t addr; fbi->screen_base = dma_alloc_wc(fbi->device, mem_len, &addr, GFP_DMA | GFP_KERNEL); if (!fbi->screen_base) { dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n", mem_len); retval = -EBUSY; goto err0; } if (lock) mutex_lock(&fbi->mm_lock); fbi->fix.smem_start = addr; fbi->fix.smem_len = mem_len; if (lock) mutex_unlock(&fbi->mm_lock); dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n", (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len); fbi->screen_size = fbi->fix.smem_len; /* Clear the screen */ memset((char *)fbi->screen_base, 0, fbi->fix.smem_len); return 0; err0: fbi->fix.smem_len = 0; fbi->fix.smem_start = 0; fbi->screen_base = NULL; return retval; } /** * mx3fb_unmap_video_memory() - de-allocate frame buffer memory. * @fbi: framebuffer information pointer * @return: error code indicating success or failure */ static int mx3fb_unmap_video_memory(struct fb_info *fbi) { dma_free_wc(fbi->device, fbi->fix.smem_len, fbi->screen_base, fbi->fix.smem_start); fbi->screen_base = NULL; mutex_lock(&fbi->mm_lock); fbi->fix.smem_start = 0; fbi->fix.smem_len = 0; mutex_unlock(&fbi->mm_lock); return 0; } /** * mx3fb_init_fbinfo() - initialize framebuffer information object. * @dev: the device * @ops: framebuffer device operations * @return: initialized framebuffer structure. */ static struct fb_info *mx3fb_init_fbinfo(struct device *dev, const struct fb_ops *ops) { struct fb_info *fbi; struct mx3fb_info *mx3fbi; int ret; /* Allocate sufficient memory for the fb structure */ fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev); if (!fbi) return NULL; mx3fbi = fbi->par; mx3fbi->cookie = -EINVAL; mx3fbi->cur_ipu_buf = 0; fbi->var.activate = FB_ACTIVATE_NOW; fbi->fbops = ops; fbi->flags = FBINFO_FLAG_DEFAULT; fbi->pseudo_palette = mx3fbi->pseudo_palette; mutex_init(&mx3fbi->mutex); /* Allocate colormap */ ret = fb_alloc_cmap(&fbi->cmap, 16, 0); if (ret < 0) { framebuffer_release(fbi); return NULL; } return fbi; } static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan) { struct device *dev = mx3fb->dev; struct mx3fb_platform_data *mx3fb_pdata = dev_get_platdata(dev); const char *name = mx3fb_pdata->name; struct fb_info *fbi; struct mx3fb_info *mx3fbi; const struct fb_videomode *mode; int ret, num_modes; if (mx3fb_pdata->disp_data_fmt >= ARRAY_SIZE(di_mappings)) { dev_err(dev, "Illegal display data format %d\n", mx3fb_pdata->disp_data_fmt); return -EINVAL; } ichan->client = mx3fb; if (ichan->dma_chan.chan_id != IDMAC_SDC_0) return -EINVAL; fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops); if (!fbi) return -ENOMEM; if (!fb_mode) fb_mode = name; if (!fb_mode) { ret = -EINVAL; goto emode; } if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) { mode = mx3fb_pdata->mode; num_modes = mx3fb_pdata->num_modes; } else { mode = mx3fb_modedb; num_modes = ARRAY_SIZE(mx3fb_modedb); } if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode, num_modes, NULL, default_bpp)) { ret = -EBUSY; goto emode; } fb_videomode_to_modelist(mode, num_modes, &fbi->modelist); /* Default Y virtual size is 2x panel size */ fbi->var.yres_virtual = fbi->var.yres * 2; mx3fb->fbi = fbi; /* set Display Interface clock period */ mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER); /* Might need to trigger HSP clock change - see 44.3.3.8.5 */ sdc_set_brightness(mx3fb, 255); sdc_set_global_alpha(mx3fb, true, 0xFF); sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0); mx3fbi = fbi->par; mx3fbi->idmac_channel = ichan; mx3fbi->ipu_ch = ichan->dma_chan.chan_id; mx3fbi->mx3fb = mx3fb; mx3fbi->blank = FB_BLANK_NORMAL; mx3fb->disp_data_fmt = mx3fb_pdata->disp_data_fmt; init_completion(&mx3fbi->flip_cmpl); disable_irq(ichan->eof_irq); dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq); ret = __set_par(fbi, false); if (ret < 0) goto esetpar; __blank(FB_BLANK_UNBLANK, fbi); dev_info(dev, "registered, using mode %s\n", fb_mode); ret = register_framebuffer(fbi); if (ret < 0) goto erfb; return 0; erfb: esetpar: emode: fb_dealloc_cmap(&fbi->cmap); framebuffer_release(fbi); return ret; } static bool chan_filter(struct dma_chan *chan, void *arg) { struct dma_chan_request *rq = arg; struct device *dev; struct mx3fb_platform_data *mx3fb_pdata; if (!imx_dma_is_ipu(chan)) return false; if (!rq) return false; dev = rq->mx3fb->dev; mx3fb_pdata = dev_get_platdata(dev); return rq->id == chan->chan_id && mx3fb_pdata->dma_dev == chan->device->dev; } static void release_fbi(struct fb_info *fbi) { mx3fb_unmap_video_memory(fbi); fb_dealloc_cmap(&fbi->cmap); unregister_framebuffer(fbi); framebuffer_release(fbi); } static int mx3fb_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; int ret; struct resource *sdc_reg; struct mx3fb_data *mx3fb; dma_cap_mask_t mask; struct dma_chan *chan; struct dma_chan_request rq; /* * Display Interface (DI) and Synchronous Display Controller (SDC) * registers */ sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!sdc_reg) return -EINVAL; mx3fb = devm_kzalloc(&pdev->dev, sizeof(*mx3fb), GFP_KERNEL); if (!mx3fb) return -ENOMEM; spin_lock_init(&mx3fb->lock); mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg)); if (!mx3fb->reg_base) { ret = -ENOMEM; goto eremap; } pr_debug("Remapped %pR at %p\n", sdc_reg, mx3fb->reg_base); /* IDMAC interface */ dmaengine_get(); mx3fb->dev = dev; platform_set_drvdata(pdev, mx3fb); rq.mx3fb = mx3fb; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); dma_cap_set(DMA_PRIVATE, mask); rq.id = IDMAC_SDC_0; chan = dma_request_channel(mask, chan_filter, &rq); if (!chan) { ret = -EBUSY; goto ersdc0; } mx3fb->backlight_level = 255; ret = init_fb_chan(mx3fb, to_idmac_chan(chan)); if (ret < 0) goto eisdc0; mx3fb_init_backlight(mx3fb); return 0; eisdc0: dma_release_channel(chan); ersdc0: dmaengine_put(); iounmap(mx3fb->reg_base); eremap: dev_err(dev, "mx3fb: failed to register fb\n"); return ret; } static void mx3fb_remove(struct platform_device *dev) { struct mx3fb_data *mx3fb = platform_get_drvdata(dev); struct fb_info *fbi = mx3fb->fbi; struct mx3fb_info *mx3_fbi = fbi->par; struct dma_chan *chan; chan = &mx3_fbi->idmac_channel->dma_chan; release_fbi(fbi); mx3fb_exit_backlight(mx3fb); dma_release_channel(chan); dmaengine_put(); iounmap(mx3fb->reg_base); } static struct platform_driver mx3fb_driver = { .driver = { .name = MX3FB_NAME, }, .probe = mx3fb_probe, .remove_new = mx3fb_remove, .suspend = mx3fb_suspend, .resume = mx3fb_resume, }; /* * Parse user specified options (`video=mx3fb:') * example: * video=mx3fb:bpp=16 */ static int __init mx3fb_setup(void) { #ifndef MODULE char *opt, *options = NULL; if (fb_get_options("mx3fb", &options)) return -ENODEV; if (!options || !*options) return 0; while ((opt = strsep(&options, ",")) != NULL) { if (!*opt) continue; if (!strncmp(opt, "bpp=", 4)) default_bpp = simple_strtoul(opt + 4, NULL, 0); else fb_mode = opt; } #endif return 0; } static int __init mx3fb_init(void) { int ret = mx3fb_setup(); if (ret < 0) return ret; ret = platform_driver_register(&mx3fb_driver); return ret; } static void __exit mx3fb_exit(void) { platform_driver_unregister(&mx3fb_driver); } module_init(mx3fb_init); module_exit(mx3fb_exit); MODULE_AUTHOR("Freescale Semiconductor, Inc."); MODULE_DESCRIPTION("MX3 framebuffer driver"); MODULE_ALIAS("platform:" MX3FB_NAME); MODULE_LICENSE("GPL v2");