// SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2022, Konrad Dybcio */ /dts-v1/; /* PMK8350 is configured to use SID6 instead of 0 */ #define PMK8350_SID 6 #include #include "sm6375.dtsi" #include "pm6125.dtsi" #include "pmk8350.dtsi" #include "pmr735a.dtsi" /* PM6125 PON is used and we can't have duplicate labels */ /delete-node/ &pmk8350_pon; / { model = "Sony Xperia 10 IV"; compatible = "sony,pdx225", "qcom,sm6375"; chassis-type = "handset"; chosen { #address-cells = <2>; #size-cells = <2>; ranges; framebuffer: framebuffer@85200000 { compatible = "simple-framebuffer"; reg = <0 0x85200000 0 0xc00000>; width = <1080>; height = <2520>; stride = <(1080 * 4)>; format = "a8r8g8b8"; /* * That's (going to be) a lot of clocks, but it's necessary due * to unused clk cleanup & no panel driver yet */ clocks = <&gcc GCC_DISP_AHB_CLK>, <&gcc GCC_DISP_HF_AXI_CLK>, <&gcc GCC_DISP_THROTTLE_CORE_CLK>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>; }; }; reserved-memory { cont_splash_mem: memory@85200000 { reg = <0 0x85200000 0 0xc00000>; no-map; }; ramoops@ffc40000 { compatible = "ramoops"; reg = <0 0xffc40000 0 0xb0000>; record-size = <0x10000>; console-size = <0x60000>; ftrace-size = <0x10000>; pmsg-size = <0x20000>; ecc-size = <16>; }; }; vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; regulator-always-on; regulator-boot-on; }; }; &sdc2_off_state { sd-cd-pins { pins = "gpio94"; function = "gpio"; drive-strength = <2>; bias-disable; }; }; &sdc2_on_state { sd-cd-pins { pins = "gpio94"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; }; &sdhc_2 { status = "okay"; vmmc-supply = <&pm6125_l22>; vqmmc-supply = <&pm6125_l5>; cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; }; &gpi_dma0 { status = "okay"; }; &gpi_dma1 { status = "okay"; }; &i2c8 { clock-frequency = <400000>; status = "okay"; touchscreen@48 { compatible = "samsung,s6sy761"; reg = <0x48>; interrupt-parent = <&tlmm>; interrupts = <22 0x2008>; vdd-supply = <&pm6125_l13>; pinctrl-names = "default"; pinctrl-0 = <&ts_int_default &ts_avdd_default>; }; }; &pmk8350_adc_tm { status = "okay"; }; &pmk8350_rtc { status = "okay"; }; &pon_pwrkey { status = "okay"; }; &pon_resin { linux,code = ; status = "okay"; }; &qupv3_id_0 { status = "okay"; }; &qupv3_id_1 { status = "okay"; }; &remoteproc_adsp { firmware-name = "qcom/sm6375/Sony/murray/adsp.mbn"; status = "okay"; }; &remoteproc_cdsp { firmware-name = "qcom/sm6375/Sony/murray/cdsp.mbn"; status = "okay"; }; &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm6125-regulators"; pm6125_s5: s5 { regulator-min-microvolt = <382000>; regulator-max-microvolt = <1120000>; }; pm6125_s6: s6 { regulator-min-microvolt = <320000>; regulator-max-microvolt = <1374000>; }; pm6125_s7: s7 { regulator-min-microvolt = <1574000>; regulator-max-microvolt = <2040000>; }; /* * S8 is VDD_GFX * L1 is VDD_LPI_CX */ pm6125_l2: l2 { regulator-min-microvolt = <1170000>; regulator-max-microvolt = <1304000>; }; pm6125_l3: l3 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; }; pm6125_l4: l4 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; }; pm6125_l5: l5 { regulator-min-microvolt = <1650000>; regulator-max-microvolt = <2960000>; regulator-allow-set-load; }; pm6125_l6: l6 { regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1304000>; }; pm6125_l7: l7 { regulator-min-microvolt = <720000>; regulator-max-microvolt = <1050000>; }; pm6125_l8: l8 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1304000>; }; pm6125_l9: l9 { regulator-min-microvolt = <1504000>; regulator-max-microvolt = <2000000>; }; pm6125_l10: l10 { regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; }; pm6125_l11: l11 { regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; }; pm6125_l12: l12 { regulator-min-microvolt = <1620000>; regulator-max-microvolt = <2000000>; }; pm6125_l13: l13 { regulator-min-microvolt = <1650000>; regulator-max-microvolt = <1980000>; }; pm6125_l14: l14 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; }; pm6125_l15: l15 { regulator-min-microvolt = <1650000>; regulator-max-microvolt = <3544000>; }; pm6125_l16: l16 { regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; }; /* L17 is VDD_LPI_MX */ pm6125_l18: l18 { regulator-min-microvolt = <830000>; regulator-max-microvolt = <920000>; }; pm6125_l19: l19 { regulator-min-microvolt = <1624000>; regulator-max-microvolt = <3304000>; }; pm6125_l20: l20 { regulator-min-microvolt = <1624000>; regulator-max-microvolt = <3304000>; }; pm6125_l21: l21 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3400000>; }; pm6125_l22: l22 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2960000>; regulator-allow-set-load; }; pm6125_l23: l23 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3400000>; }; pm6125_l24: l24 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <3544000>; }; }; regulators-1 { compatible = "qcom,rpm-pmr735a-regulators"; /* * S1 is VDD_MX * S2 is VDD_CX */ pmr735a_l1: l1 { regulator-min-microvolt = <570000>; regulator-max-microvolt = <650000>; }; pmr735a_l2: l2 { regulator-min-microvolt = <352000>; regulator-max-microvolt = <796000>; }; pmr735a_l3: l3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1200000>; }; pmr735a_l4: l4 { regulator-min-microvolt = <1504000>; regulator-max-microvolt = <2000000>; }; pmr735a_l5: l5 { regulator-min-microvolt = <751000>; regulator-max-microvolt = <824000>; }; pmr735a_l6: l6 { regulator-min-microvolt = <504000>; regulator-max-microvolt = <868000>; }; pmr735a_l7: l7 { regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3544000>; }; }; }; &sdc2_off_state { sd-cd-pins { pins = "gpio94"; function = "gpio"; drive-strength = <2>; bias-disable; }; }; &sdc2_on_state { sd-cd-pins { pins = "gpio94"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; }; &sdhc_2 { status = "okay"; vmmc-supply = <&pm6125_l22>; vqmmc-supply = <&pm6125_l5>; cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; }; &tlmm { gpio-reserved-ranges = <13 4>; ts_int_default: ts-int-default-state { pins = "gpio22"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; ts_avdd_default: ts-avdd-default-state { pins = "gpio59"; function = "gpio"; drive-strength = <8>; output-high; }; }; &usb_1 { status = "okay"; }; &usb_1_dwc3 { dr_mode = "peripheral"; }; &usb_1_hsphy { status = "okay"; }; &xo_board_clk { clock-frequency = <19200000>; };