64 lines
2.1 KiB
Plaintext
64 lines
2.1 KiB
Plaintext
Texas Instruments clkctrl clock binding
|
|
|
|
Texas Instruments SoCs can have a clkctrl clock controller for each
|
|
interconnect target module. The clkctrl clock controller manages functional
|
|
and interface clocks for each module. Each clkctrl controller can also
|
|
gate one or more optional functional clocks for a module, and can have one
|
|
or more clock muxes. There is a clkctrl clock controller typically for each
|
|
interconnect target module on omap4 and later variants.
|
|
|
|
The clock consumers can specify the index of the clkctrl clock using
|
|
the hardware offset from the clkctrl instance register space. The optional
|
|
clocks can be specified by clkctrl hardware offset and the index of the
|
|
optional clock.
|
|
|
|
For more information, please see the Linux clock framework binding at
|
|
Documentation/devicetree/bindings/clock/clock-bindings.txt.
|
|
|
|
Required properties :
|
|
- compatible : shall be "ti,clkctrl" or a clock domain specific name:
|
|
"ti,clkctrl-l4-cfg"
|
|
"ti,clkctrl-l4-per"
|
|
"ti,clkctrl-l4-secure"
|
|
"ti,clkctrl-l4-wkup"
|
|
- clock-output-names : from common clock binding
|
|
- #clock-cells : shall contain 2 with the first entry being the instance
|
|
offset from the clock domain base and the second being the
|
|
clock index
|
|
- reg : clock registers
|
|
|
|
Example: Clock controller node on omap 4430:
|
|
|
|
&cm2 {
|
|
l4per: cm@1400 {
|
|
cm_l4per@0 {
|
|
cm_l4per_clkctrl: clock@20 {
|
|
compatible = "ti,clkctrl";
|
|
clock-output-names = "l4_per";
|
|
reg = <0x20 0x1b0>;
|
|
#clock-cells = <2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
Example: Preprocessor helper macros in dt-bindings/clock/ti-clkctrl.h
|
|
|
|
#define OMAP4_CLKCTRL_OFFSET 0x20
|
|
#define OMAP4_CLKCTRL_INDEX(offset) ((offset) - OMAP4_CLKCTRL_OFFSET)
|
|
#define MODULEMODE_HWCTRL 1
|
|
#define MODULEMODE_SWCTRL 2
|
|
|
|
#define OMAP4_GPTIMER10_CLKTRL OMAP4_CLKCTRL_INDEX(0x28)
|
|
#define OMAP4_GPTIMER11_CLKTRL OMAP4_CLKCTRL_INDEX(0x30)
|
|
#define OMAP4_GPTIMER2_CLKTRL OMAP4_CLKCTRL_INDEX(0x38)
|
|
...
|
|
#define OMAP4_GPIO2_CLKCTRL OMAP_CLKCTRL_INDEX(0x60)
|
|
|
|
Example: Clock consumer node for GPIO2:
|
|
|
|
&gpio2 {
|
|
clocks = <&cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 0
|
|
&cm_l4per_clkctrl OMAP4_GPIO2_CLKCTRL 8>;
|
|
};
|