77 lines
2.5 KiB
Plaintext
77 lines
2.5 KiB
Plaintext
Broadcom AVS mail box and interrupt register bindings
|
|
=====================================================
|
|
|
|
A total of three DT nodes are required. One node (brcm,avs-cpu-data-mem)
|
|
references the mailbox register used to communicate with the AVS CPU[1]. The
|
|
second node (brcm,avs-cpu-l2-intr) is required to trigger an interrupt on
|
|
the AVS CPU. The interrupt tells the AVS CPU that it needs to process a
|
|
command sent to it by a driver. Interrupting the AVS CPU is mandatory for
|
|
commands to be processed.
|
|
|
|
The interface also requires a reference to the AVS host interrupt controller,
|
|
so a driver can react to interrupts generated by the AVS CPU whenever a command
|
|
has been processed. See [2] for more information on the brcm,l2-intc node.
|
|
|
|
[1] The AVS CPU is an independent co-processor that runs proprietary
|
|
firmware. On some SoCs, this firmware supports DFS and DVFS in addition to
|
|
Adaptive Voltage Scaling.
|
|
|
|
[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
|
|
|
|
|
|
Node brcm,avs-cpu-data-mem
|
|
--------------------------
|
|
|
|
Required properties:
|
|
- compatible: must include: brcm,avs-cpu-data-mem and
|
|
should include: one of brcm,bcm7271-avs-cpu-data-mem or
|
|
brcm,bcm7268-avs-cpu-data-mem
|
|
- reg: Specifies base physical address and size of the registers.
|
|
- interrupts: The interrupt that the AVS CPU will use to interrupt the host
|
|
when a command completed.
|
|
- interrupt-names: The name of the interrupt used to interrupt the host.
|
|
|
|
Optional properties:
|
|
- None
|
|
|
|
Node brcm,avs-cpu-l2-intr
|
|
-------------------------
|
|
|
|
Required properties:
|
|
- compatible: must include: brcm,avs-cpu-l2-intr and
|
|
should include: one of brcm,bcm7271-avs-cpu-l2-intr or
|
|
brcm,bcm7268-avs-cpu-l2-intr
|
|
- reg: Specifies base physical address and size of the registers.
|
|
|
|
Optional properties:
|
|
- None
|
|
|
|
|
|
Example
|
|
=======
|
|
|
|
avs_host_l2_intc: interrupt-controller@f04d1200 {
|
|
#interrupt-cells = <1>;
|
|
compatible = "brcm,l2-intc";
|
|
interrupt-parent = <&intc>;
|
|
reg = <0xf04d1200 0x48>;
|
|
interrupt-controller;
|
|
interrupts = <0x0 0x19 0x0>;
|
|
interrupt-names = "avs";
|
|
};
|
|
|
|
avs-cpu-data-mem@f04c4000 {
|
|
compatible = "brcm,bcm7271-avs-cpu-data-mem",
|
|
"brcm,avs-cpu-data-mem";
|
|
reg = <0xf04c4000 0x60>;
|
|
interrupts = <0x1a>;
|
|
interrupt-parent = <&avs_host_l2_intc>;
|
|
interrupt-names = "sw_intr";
|
|
};
|
|
|
|
avs-cpu-l2-intr@f04d1100 {
|
|
compatible = "brcm,bcm7271-avs-cpu-l2-intr",
|
|
"brcm,avs-cpu-l2-intr";
|
|
reg = <0xf04d1100 0x10>;
|
|
};
|