155 lines
4.1 KiB
YAML
155 lines
4.1 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/gpio/xlnx,gpio-xilinx.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Xilinx AXI GPIO controller
|
|
|
|
maintainers:
|
|
- Neeli Srinivas <srinivas.neeli@amd.com>
|
|
|
|
description:
|
|
The AXI GPIO design provides a general purpose input/output interface
|
|
to an AXI4-Lite interface. The AXI GPIO can be configured as either
|
|
a single or a dual-channel device. The width of each channel is
|
|
independently configurable. The channels can be configured to
|
|
generate an interrupt when a transition on any of their inputs occurs.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- xlnx,xps-gpio-1.00.a
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
"#gpio-cells":
|
|
const: 2
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
gpio-controller: true
|
|
|
|
gpio-line-names:
|
|
description: strings describing the names of each gpio line
|
|
minItems: 1
|
|
maxItems: 64
|
|
|
|
interrupt-controller: true
|
|
|
|
"#interrupt-cells":
|
|
const: 2
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
interrupt-names: true
|
|
|
|
xlnx,all-inputs:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: This option sets this GPIO channel1 bits in input mode.
|
|
|
|
xlnx,all-inputs-2:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: This option sets this GPIO channel2 bits in input mode.
|
|
|
|
xlnx,all-outputs:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: This option sets this GPIO channel1 bits in output mode.
|
|
|
|
xlnx,all-outputs-2:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: This option sets this GPIO channel2 bits in output mode.
|
|
|
|
xlnx,dout-default:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: Sets the default value of all the enabled bits of
|
|
channel1.
|
|
default: 0
|
|
|
|
xlnx,dout-default-2:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: Sets the default value of all the enabled bits of
|
|
channel2.
|
|
default: 0
|
|
|
|
xlnx,gpio-width:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: The value defines the bit width of the GPIO channel1.
|
|
minimum: 1
|
|
maximum: 32
|
|
default: 32
|
|
|
|
xlnx,gpio2-width:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: The value defines the bit width of the GPIO channel2.
|
|
minimum: 1
|
|
maximum: 32
|
|
default: 32
|
|
|
|
xlnx,interrupt-present:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: This parameter enables interrupt control logic
|
|
and interrupt registers in GPIO module.
|
|
minimum: 0
|
|
maximum: 1
|
|
default: 0
|
|
|
|
xlnx,is-dual:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: This parameter enables a second GPIO channel (GPIO2).
|
|
minimum: 0
|
|
maximum: 1
|
|
default: 0
|
|
|
|
xlnx,tri-default:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: This value configures the input or output mode
|
|
of each bit of GPIO channel1.
|
|
|
|
xlnx,tri-default-2:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: This value configures the input or output mode
|
|
of each bit of GPIO channel2.
|
|
|
|
required:
|
|
- reg
|
|
- compatible
|
|
- gpio-controller
|
|
- "#gpio-cells"
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
gpio@e000a000 {
|
|
compatible = "xlnx,xps-gpio-1.00.a";
|
|
reg = <0xa0020000 0x10000>;
|
|
#gpio-cells = <2>;
|
|
#interrupt-cells = <0x2>;
|
|
clocks = <&zynqmp_clk 71>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
interrupt-names = "ip2intc_irpt";
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <0 89 4>;
|
|
xlnx,all-inputs = <0x0>;
|
|
xlnx,all-inputs-2 = <0x0>;
|
|
xlnx,all-outputs = <0x0>;
|
|
xlnx,all-outputs-2 = <0x0>;
|
|
xlnx,dout-default = <0x0>;
|
|
xlnx,dout-default-2 = <0x0>;
|
|
xlnx,gpio-width = <0x20>;
|
|
xlnx,gpio2-width = <0x20>;
|
|
xlnx,interrupt-present = <0x1>;
|
|
xlnx,is-dual = <0x1>;
|
|
xlnx,tri-default = <0xFFFFFFFF>;
|
|
xlnx,tri-default-2 = <0xFFFFFFFF>;
|
|
};
|
|
|
|
...
|