130 lines
3.1 KiB
YAML
130 lines
3.1 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
# Copyright (C) 2021 Microchip Technology, Inc.
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/microchip,xisc.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Microchip eXtended Image Sensor Controller (XISC)
|
|
|
|
maintainers:
|
|
- Eugen Hristev <eugen.hristev@microchip.com>
|
|
|
|
description: |
|
|
The eXtended Image Sensor Controller (XISC) device provides the video input capabilities for the
|
|
Microchip AT91 SAM family of devices.
|
|
|
|
The XISC has a single internal parallel input that supports RAW Bayer, RGB or YUV video.
|
|
The source can be either a demuxer from a CSI2 type of bus, or a simple direct bridge to a
|
|
parallel sensor.
|
|
|
|
The XISC provides one clock output that is used to clock the demuxer/bridge.
|
|
|
|
properties:
|
|
compatible:
|
|
const: microchip,sama7g5-isc
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
clock-names:
|
|
items:
|
|
- const: hclock
|
|
|
|
'#clock-cells':
|
|
const: 0
|
|
|
|
clock-output-names:
|
|
const: isc-mck
|
|
|
|
microchip,mipi-mode:
|
|
type: boolean
|
|
description:
|
|
As the XISC is usually connected to a demux/bridge, the XISC receives
|
|
the same type of input, however, it should be aware of the type of
|
|
signals received. The mipi-mode enables different internal handling
|
|
of the data and clock lines.
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
description:
|
|
Input port node, single endpoint describing the input pad.
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: video-interfaces.yaml#
|
|
|
|
properties:
|
|
bus-type:
|
|
enum: [5, 6]
|
|
|
|
remote-endpoint: true
|
|
|
|
bus-width:
|
|
enum: [8, 9, 10, 11, 12, 14]
|
|
default: 12
|
|
|
|
hsync-active:
|
|
enum: [0, 1]
|
|
default: 1
|
|
|
|
vsync-active:
|
|
enum: [0, 1]
|
|
default: 1
|
|
|
|
pclk-sample:
|
|
enum: [0, 1]
|
|
default: 1
|
|
|
|
required:
|
|
- remote-endpoint
|
|
- bus-type
|
|
|
|
additionalProperties: false
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- clock-names
|
|
- '#clock-cells'
|
|
- clock-output-names
|
|
- port
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/at91.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/media/video-interfaces.h>
|
|
|
|
xisc: xisc@e1408000 {
|
|
compatible = "microchip,sama7g5-isc";
|
|
reg = <0xe1408000 0x2000>;
|
|
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
|
|
clock-names = "hclock";
|
|
#clock-cells = <0>;
|
|
clock-output-names = "isc-mck";
|
|
|
|
port {
|
|
xisc_in: endpoint {
|
|
bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
|
|
remote-endpoint = <&csi2dc_out>;
|
|
hsync-active = <1>;
|
|
vsync-active = <1>;
|
|
bus-width = <12>;
|
|
};
|
|
};
|
|
};
|