166 lines
3.9 KiB
YAML
166 lines
3.9 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/samsung,s5c73m3.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Samsung S5C73M3 8Mp camera ISP
|
|
|
|
maintainers:
|
|
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
- Sylwester Nawrocki <s.nawrocki@samsung.com>
|
|
|
|
description:
|
|
The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656)
|
|
video data busses. The I2C bus is the main control bus and additionally the
|
|
SPI bus is used, mostly for transferring the firmware to and from the
|
|
device. Two slave device nodes corresponding to these control bus
|
|
interfaces are required and should be placed under respective bus
|
|
controller nodes.
|
|
|
|
properties:
|
|
compatible:
|
|
const: samsung,s5c73m3
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
clock-names:
|
|
items:
|
|
- const: cis_extclk
|
|
|
|
clock-frequency:
|
|
default: 24000000
|
|
description: cis_extclk clock frequency.
|
|
|
|
standby-gpios:
|
|
maxItems: 1
|
|
description: STANDBY pin.
|
|
|
|
vdda-supply:
|
|
description: Analog power supply (1.2V).
|
|
|
|
vdd-af-supply:
|
|
description: lens power supply (2.8V).
|
|
|
|
vddio-cis-supply:
|
|
description: CIS I/O power supply (1.2V to 1.8V).
|
|
|
|
vddio-host-supply:
|
|
description: Host I/O power supply (1.8V to 2.8V).
|
|
|
|
vdd-int-supply:
|
|
description: Digital power supply (1.2V).
|
|
|
|
vdd-reg-supply:
|
|
description: Regulator input power supply (2.8V).
|
|
|
|
xshutdown-gpios:
|
|
maxItems: 1
|
|
description: XSHUTDOWN pin.
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
additionalProperties: false
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
data-lanes:
|
|
items:
|
|
- const: 1
|
|
- const: 2
|
|
- const: 3
|
|
- const: 4
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
allOf:
|
|
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
|
- if:
|
|
required:
|
|
- spi-max-frequency
|
|
then:
|
|
properties:
|
|
# The SPI node is simplified firmware-transfer interface only
|
|
clocks: false
|
|
clock-names: false
|
|
standby-gpios: false
|
|
vdda-supply: false
|
|
vdd-af-supply: false
|
|
vddio-cis-supply: false
|
|
vddio-host-supply: false
|
|
vdd-int-supply: false
|
|
vdd-reg-supply: false
|
|
xshutdown-gpios: false
|
|
port: false
|
|
else:
|
|
required:
|
|
- clocks
|
|
- clock-names
|
|
- standby-gpios
|
|
- vdda-supply
|
|
- vdd-af-supply
|
|
- vddio-cis-supply
|
|
- vddio-host-supply
|
|
- vdd-int-supply
|
|
- vdd-reg-supply
|
|
- xshutdown-gpios
|
|
- port
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
image-sensor@3c {
|
|
compatible = "samsung,s5c73m3";
|
|
reg = <0x3c>;
|
|
clock-frequency = <24000000>;
|
|
clocks = <&camera 0>;
|
|
clock-names = "cis_extclk";
|
|
standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>;
|
|
vdda-supply = <&cam_vdda_reg>;
|
|
vdd-af-supply = <&cam_af_reg>;
|
|
vddio-cis-supply = <&ldo9_reg>;
|
|
vddio-host-supply = <&ldo18_reg>;
|
|
vdd-int-supply = <&buck9_reg>;
|
|
vdd-reg-supply = <&cam_io_reg>;
|
|
xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
|
|
|
|
port {
|
|
s5c73m3_ep: endpoint {
|
|
remote-endpoint = <&csis0_ep>;
|
|
data-lanes = <1 2 3 4>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
image-sensor@0 {
|
|
compatible = "samsung,s5c73m3";
|
|
reg = <0>;
|
|
spi-max-frequency = <50000000>;
|
|
controller-data {
|
|
samsung,spi-feedback-delay = <2>;
|
|
};
|
|
};
|
|
};
|