250 lines
6.8 KiB
YAML
250 lines
6.8 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/memory-controllers/nvidia,tegra20-emc.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: NVIDIA Tegra20 SoC External Memory Controller
|
|
|
|
maintainers:
|
|
- Dmitry Osipenko <digetx@gmail.com>
|
|
- Jon Hunter <jonathanh@nvidia.com>
|
|
- Thierry Reding <thierry.reding@gmail.com>
|
|
|
|
description: |
|
|
The External Memory Controller (EMC) interfaces with the off-chip SDRAM to
|
|
service the request stream sent from Memory Controller. The EMC also has
|
|
various performance-affecting settings beyond the obvious SDRAM configuration
|
|
parameters and initialization settings. Tegra20 EMC supports multiple JEDEC
|
|
standard protocols: DDR1, LPDDR2 and DDR2.
|
|
|
|
properties:
|
|
compatible:
|
|
const: nvidia,tegra20-emc
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
"#address-cells":
|
|
const: 1
|
|
|
|
"#size-cells":
|
|
const: 0
|
|
|
|
"#interconnect-cells":
|
|
const: 0
|
|
|
|
nvidia,memory-controller:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description:
|
|
Phandle of the Memory Controller node.
|
|
|
|
power-domains:
|
|
maxItems: 1
|
|
description:
|
|
Phandle of the SoC "core" power domain.
|
|
|
|
operating-points-v2:
|
|
description:
|
|
Should contain freqs and voltages and opp-supported-hw property, which
|
|
is a bitfield indicating SoC process ID mask.
|
|
|
|
nvidia,use-ram-code:
|
|
type: boolean
|
|
description:
|
|
If present, the emc-tables@ sub-nodes will be addressed.
|
|
|
|
$defs:
|
|
emc-table:
|
|
type: object
|
|
properties:
|
|
compatible:
|
|
const: nvidia,tegra20-emc-table
|
|
|
|
clock-frequency:
|
|
description:
|
|
Memory clock rate in kHz.
|
|
minimum: 1000
|
|
maximum: 900000
|
|
|
|
reg:
|
|
maxItems: 1
|
|
description:
|
|
Either an opaque enumerator to tell different tables apart, or
|
|
the valid frequency for which the table should be used (in kHz).
|
|
|
|
nvidia,emc-registers:
|
|
description:
|
|
EMC timing characterization data. These are the registers
|
|
(see section "15.4.1 EMC Registers" in the TRM) whose values
|
|
need to be specified, according to the board documentation.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
items:
|
|
- description: EMC_RC
|
|
- description: EMC_RFC
|
|
- description: EMC_RAS
|
|
- description: EMC_RP
|
|
- description: EMC_R2W
|
|
- description: EMC_W2R
|
|
- description: EMC_R2P
|
|
- description: EMC_W2P
|
|
- description: EMC_RD_RCD
|
|
- description: EMC_WR_RCD
|
|
- description: EMC_RRD
|
|
- description: EMC_REXT
|
|
- description: EMC_WDV
|
|
- description: EMC_QUSE
|
|
- description: EMC_QRST
|
|
- description: EMC_QSAFE
|
|
- description: EMC_RDV
|
|
- description: EMC_REFRESH
|
|
- description: EMC_BURST_REFRESH_NUM
|
|
- description: EMC_PDEX2WR
|
|
- description: EMC_PDEX2RD
|
|
- description: EMC_PCHG2PDEN
|
|
- description: EMC_ACT2PDEN
|
|
- description: EMC_AR2PDEN
|
|
- description: EMC_RW2PDEN
|
|
- description: EMC_TXSR
|
|
- description: EMC_TCKE
|
|
- description: EMC_TFAW
|
|
- description: EMC_TRPAB
|
|
- description: EMC_TCLKSTABLE
|
|
- description: EMC_TCLKSTOP
|
|
- description: EMC_TREFBW
|
|
- description: EMC_QUSE_EXTRA
|
|
- description: EMC_FBIO_CFG6
|
|
- description: EMC_ODT_WRITE
|
|
- description: EMC_ODT_READ
|
|
- description: EMC_FBIO_CFG5
|
|
- description: EMC_CFG_DIG_DLL
|
|
- description: EMC_DLL_XFORM_DQS
|
|
- description: EMC_DLL_XFORM_QUSE
|
|
- description: EMC_ZCAL_REF_CNT
|
|
- description: EMC_ZCAL_WAIT_CNT
|
|
- description: EMC_AUTO_CAL_INTERVAL
|
|
- description: EMC_CFG_CLKTRIM_0
|
|
- description: EMC_CFG_CLKTRIM_1
|
|
- description: EMC_CFG_CLKTRIM_2
|
|
|
|
required:
|
|
- clock-frequency
|
|
- compatible
|
|
- reg
|
|
- nvidia,emc-registers
|
|
|
|
additionalProperties: false
|
|
|
|
patternProperties:
|
|
"^emc-table@[0-9]+$":
|
|
$ref: "#/$defs/emc-table"
|
|
|
|
"^emc-tables@[a-z0-9-]+$":
|
|
type: object
|
|
properties:
|
|
reg:
|
|
maxItems: 1
|
|
description:
|
|
An opaque enumerator to tell different tables apart.
|
|
|
|
nvidia,ram-code:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
Value of RAM_CODE this timing set is used for.
|
|
|
|
"#address-cells":
|
|
const: 1
|
|
|
|
"#size-cells":
|
|
const: 0
|
|
|
|
lpddr2:
|
|
$ref: ddr/jedec,lpddr2.yaml#
|
|
type: object
|
|
|
|
patternProperties:
|
|
"^emc-table@[0-9]+$":
|
|
$ref: "#/$defs/emc-table"
|
|
|
|
oneOf:
|
|
- required:
|
|
- nvidia,ram-code
|
|
|
|
- required:
|
|
- lpddr2
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
- nvidia,memory-controller
|
|
- "#interconnect-cells"
|
|
- operating-points-v2
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
external-memory-controller@7000f400 {
|
|
compatible = "nvidia,tegra20-emc";
|
|
reg = <0x7000f400 0x400>;
|
|
interrupts = <0 78 4>;
|
|
clocks = <&clock_controller 57>;
|
|
|
|
nvidia,memory-controller = <&mc>;
|
|
operating-points-v2 = <&dvfs_opp_table>;
|
|
power-domains = <&domain>;
|
|
|
|
#interconnect-cells = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
nvidia,use-ram-code;
|
|
|
|
emc-tables@0 {
|
|
nvidia,ram-code = <0>;
|
|
reg = <0>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
emc-table@333000 {
|
|
reg = <333000>;
|
|
compatible = "nvidia,tegra20-emc-table";
|
|
clock-frequency = <333000>;
|
|
nvidia,emc-registers = <0x00000018 0x00000033
|
|
0x00000012 0x00000004 0x00000004 0x00000005
|
|
0x00000003 0x0000000c 0x00000006 0x00000006
|
|
0x00000003 0x00000001 0x00000004 0x00000005
|
|
0x00000004 0x00000009 0x0000000d 0x00000bff
|
|
0x00000000 0x00000003 0x00000003 0x00000006
|
|
0x00000006 0x00000001 0x00000011 0x000000c8
|
|
0x00000003 0x0000000e 0x00000007 0x00000008
|
|
0x00000002 0x00000000 0x00000000 0x00000002
|
|
0x00000000 0x00000000 0x00000083 0xf0440303
|
|
0x007fe010 0x00001414 0x00000000 0x00000000
|
|
0x00000000 0x00000000 0x00000000 0x00000000>;
|
|
};
|
|
};
|
|
|
|
emc-tables@1 {
|
|
reg = <1>;
|
|
|
|
lpddr2 {
|
|
compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
|
|
revision-id1 = <1>;
|
|
density = <2048>;
|
|
io-width = <16>;
|
|
};
|
|
};
|
|
};
|