126 lines
3.3 KiB
YAML
126 lines
3.3 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/mfd/ti,tps65086.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: TPS65086 Power Management Integrated Circuit (PMIC)
|
|
|
|
maintainers:
|
|
- Emil Renner Berthing <kernel@esmil.dk>
|
|
|
|
properties:
|
|
compatible:
|
|
const: ti,tps65086
|
|
|
|
reg:
|
|
const: 0x5e
|
|
description: I2C slave address
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
|
|
'#interrupt-cells':
|
|
const: 2
|
|
description: |
|
|
The first cell is the IRQ number. The second cell is the flags,
|
|
encoded as trigger masks from ../interrupt-controller/interrupts.txt.
|
|
|
|
gpio-controller: true
|
|
|
|
'#gpio-cells':
|
|
const: 2
|
|
description: |
|
|
The first cell is the pin number and the second cell is used to specify
|
|
flags. See ../gpio/gpio.txt for more information.
|
|
|
|
regulators:
|
|
type: object
|
|
additionalProperties: false
|
|
description: |
|
|
List of child nodes that specify the regulator initialization data.
|
|
Child nodes must be named after their hardware counterparts:
|
|
buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt.
|
|
Each child node is defined using the standard binding for regulators and
|
|
the optional regulator properties defined below.
|
|
|
|
patternProperties:
|
|
"^buck[1-6]$":
|
|
type: object
|
|
$ref: ../regulator/regulator.yaml
|
|
|
|
properties:
|
|
regulator-name: true
|
|
regulator-boot-on: true
|
|
regulator-always-on: true
|
|
regulator-min-microvolt: true
|
|
regulator-max-microvolt: true
|
|
ti,regulator-step-size-25mv:
|
|
type: boolean
|
|
description: |
|
|
Set this if the regulator is factory set with a 25mv step voltage
|
|
mapping.
|
|
ti,regulator-decay:
|
|
type: boolean
|
|
description: |
|
|
Set this if the output needs to decay, default is for the output
|
|
to slew down.
|
|
|
|
additionalProperties: false
|
|
|
|
"^(ldoa[1-3]|swa1|swb[1-2]|vtt)$":
|
|
type: object
|
|
$ref: ../regulator/regulator.yaml
|
|
|
|
properties:
|
|
regulator-name: true
|
|
regulator-boot-on: true
|
|
regulator-always-on: true
|
|
regulator-min-microvolt: true
|
|
regulator-max-microvolt: true
|
|
|
|
additionalProperties: false
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- gpio-controller
|
|
- '#gpio-cells'
|
|
- regulators
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pmic: pmic@5e {
|
|
compatible = "ti,tps65086";
|
|
reg = <0x5e>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
regulators {
|
|
buck1 {
|
|
regulator-name = "vcc1";
|
|
regulator-min-microvolt = <1600000>;
|
|
regulator-max-microvolt = <1600000>;
|
|
regulator-boot-on;
|
|
ti,regulator-decay;
|
|
ti,regulator-step-size-25mv;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|