49 lines
1.5 KiB
YAML
49 lines
1.5 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/mmc/mmc-pwrseq-emmc.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Simple eMMC hardware reset provider
|
|
|
|
maintainers:
|
|
- Ulf Hansson <ulf.hansson@linaro.org>
|
|
|
|
description:
|
|
The purpose of this driver is to perform standard eMMC hw reset
|
|
procedure, as described by Jedec 4.4 specification. This procedure is
|
|
performed just after MMC core enabled power to the given mmc host (to
|
|
fix possible issues if bootloader has left eMMC card in initialized or
|
|
unknown state), and before performing complete system reboot (also in
|
|
case of emergency reboot call). The latter is needed on boards, which
|
|
doesn't have hardware reset logic connected to emmc card and (limited or
|
|
broken) ROM bootloaders are unable to read second stage from the emmc
|
|
card if the card is left in unknown or already initialized state.
|
|
|
|
properties:
|
|
compatible:
|
|
const: mmc-pwrseq-emmc
|
|
|
|
reset-gpios:
|
|
minItems: 1
|
|
description:
|
|
contains a GPIO specifier. The reset GPIO is asserted
|
|
and then deasserted to perform eMMC card reset. To perform
|
|
reset procedure as described in Jedec 4.4 specification, the
|
|
gpio line should be defined as GPIO_ACTIVE_LOW.
|
|
|
|
required:
|
|
- compatible
|
|
- reset-gpios
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
pwrseq {
|
|
compatible = "mmc-pwrseq-emmc";
|
|
reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
|
|
};
|
|
...
|