371 lines
10 KiB
YAML
371 lines
10 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/mmc/mtk-sd.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: MTK MSDC Storage Host Controller
|
|
|
|
maintainers:
|
|
- Chaotian Jing <chaotian.jing@mediatek.com>
|
|
- Wenbin Mei <wenbin.mei@mediatek.com>
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- enum:
|
|
- mediatek,mt2701-mmc
|
|
- mediatek,mt2712-mmc
|
|
- mediatek,mt6779-mmc
|
|
- mediatek,mt6795-mmc
|
|
- mediatek,mt7620-mmc
|
|
- mediatek,mt7622-mmc
|
|
- mediatek,mt7986-mmc
|
|
- mediatek,mt8135-mmc
|
|
- mediatek,mt8173-mmc
|
|
- mediatek,mt8183-mmc
|
|
- mediatek,mt8516-mmc
|
|
- items:
|
|
- const: mediatek,mt7623-mmc
|
|
- const: mediatek,mt2701-mmc
|
|
- items:
|
|
- enum:
|
|
- mediatek,mt8186-mmc
|
|
- mediatek,mt8188-mmc
|
|
- mediatek,mt8192-mmc
|
|
- mediatek,mt8195-mmc
|
|
- mediatek,mt8365-mmc
|
|
- const: mediatek,mt8183-mmc
|
|
|
|
reg:
|
|
minItems: 1
|
|
items:
|
|
- description: base register (required).
|
|
- description: top base register (required for MT8183).
|
|
|
|
clocks:
|
|
description:
|
|
Should contain phandle for the clock feeding the MMC controller.
|
|
minItems: 2
|
|
maxItems: 7
|
|
|
|
clock-names:
|
|
minItems: 2
|
|
maxItems: 7
|
|
|
|
interrupts:
|
|
description:
|
|
Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended
|
|
interrupt is required and be configured as wakeup source irq.
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
interrupt-names:
|
|
items:
|
|
- const: msdc
|
|
- const: sdio_wakeup
|
|
|
|
pinctrl-names:
|
|
description:
|
|
Should at least contain default and state_uhs. To support SDIO in-band wakeup, dat1 pin
|
|
will be switched between GPIO mode and SDIO DAT1 mode, state_eint is mandatory in this
|
|
scenario.
|
|
minItems: 2
|
|
items:
|
|
- const: default
|
|
- const: state_uhs
|
|
- const: state_eint
|
|
|
|
pinctrl-0:
|
|
description:
|
|
should contain default/high speed pin ctrl.
|
|
maxItems: 1
|
|
|
|
pinctrl-1:
|
|
description:
|
|
should contain uhs mode pin ctrl.
|
|
maxItems: 1
|
|
|
|
pinctrl-2:
|
|
description:
|
|
should switch dat1 pin to GPIO mode.
|
|
maxItems: 1
|
|
|
|
assigned-clocks:
|
|
description:
|
|
PLL of the source clock.
|
|
maxItems: 1
|
|
|
|
assigned-clock-parents:
|
|
description:
|
|
parent of source clock, used for HS400 mode to get 400Mhz source clock.
|
|
maxItems: 1
|
|
|
|
hs400-ds-delay:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
HS400 DS delay setting.
|
|
minimum: 0
|
|
maximum: 0xffffffff
|
|
|
|
mediatek,hs200-cmd-int-delay:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
HS200 command internal delay setting.
|
|
This field has total 32 stages.
|
|
The value is an integer from 0 to 31.
|
|
minimum: 0
|
|
maximum: 31
|
|
|
|
mediatek,hs400-cmd-int-delay:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
HS400 command internal delay setting.
|
|
This field has total 32 stages.
|
|
The value is an integer from 0 to 31.
|
|
minimum: 0
|
|
maximum: 31
|
|
|
|
mediatek,hs400-cmd-resp-sel-rising:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
HS400 command response sample selection.
|
|
If present, HS400 command responses are sampled on rising edges.
|
|
If not present, HS400 command responses are sampled on falling edges.
|
|
|
|
mediatek,hs400-ds-dly3:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
Gear of the third delay line for DS for input data latch in data
|
|
pad macro, there are 32 stages from 0 to 31.
|
|
For different corner IC, the time is different about one step, it is
|
|
about 100ps.
|
|
The value is confirmed by doing scan and calibration to find a best
|
|
value with corner IC and it is valid only for HS400 mode.
|
|
minimum: 0
|
|
maximum: 31
|
|
|
|
mediatek,latch-ck:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
Some SoCs do not support enhance_rx, need set correct latch-ck to avoid
|
|
data crc error caused by stop clock(fifo full) Valid range = [0:0x7].
|
|
if not present, default value is 0.
|
|
applied to compatible "mediatek,mt2701-mmc".
|
|
minimum: 0
|
|
maximum: 7
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
reset-names:
|
|
const: hrst
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
- clock-names
|
|
- pinctrl-names
|
|
- pinctrl-0
|
|
- pinctrl-1
|
|
- vmmc-supply
|
|
- vqmmc-supply
|
|
|
|
allOf:
|
|
- $ref: mmc-controller.yaml#
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- mediatek,mt2701-mmc
|
|
- mediatek,mt6779-mmc
|
|
- mediatek,mt6795-mmc
|
|
- mediatek,mt7620-mmc
|
|
- mediatek,mt7622-mmc
|
|
- mediatek,mt7623-mmc
|
|
- mediatek,mt8135-mmc
|
|
- mediatek,mt8173-mmc
|
|
- mediatek,mt8183-mmc
|
|
- mediatek,mt8186-mmc
|
|
- mediatek,mt8188-mmc
|
|
- mediatek,mt8195-mmc
|
|
- mediatek,mt8516-mmc
|
|
then:
|
|
properties:
|
|
clocks:
|
|
minItems: 2
|
|
items:
|
|
- description: source clock
|
|
- description: HCLK which used for host
|
|
- description: independent source clock gate
|
|
clock-names:
|
|
minItems: 2
|
|
items:
|
|
- const: source
|
|
- const: hclk
|
|
- const: source_cg
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: mediatek,mt2712-mmc
|
|
then:
|
|
properties:
|
|
clocks:
|
|
minItems: 3
|
|
items:
|
|
- description: source clock
|
|
- description: HCLK which used for host
|
|
- description: independent source clock gate
|
|
- description: bus clock used for internal register access (required for MSDC0/3).
|
|
clock-names:
|
|
minItems: 3
|
|
items:
|
|
- const: source
|
|
- const: hclk
|
|
- const: source_cg
|
|
- const: bus_clk
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: mediatek,mt8183-mmc
|
|
then:
|
|
properties:
|
|
reg:
|
|
minItems: 2
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- mediatek,mt7986-mmc
|
|
then:
|
|
properties:
|
|
clocks:
|
|
minItems: 3
|
|
items:
|
|
- description: source clock
|
|
- description: HCLK which used for host
|
|
- description: independent source clock gate
|
|
- description: bus clock used for internal register access (required for MSDC0/3).
|
|
- description: msdc subsys clock gate
|
|
clock-names:
|
|
minItems: 3
|
|
items:
|
|
- const: source
|
|
- const: hclk
|
|
- const: source_cg
|
|
- const: bus_clk
|
|
- const: sys_cg
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- mediatek,mt8186-mmc
|
|
- mediatek,mt8188-mmc
|
|
- mediatek,mt8195-mmc
|
|
then:
|
|
properties:
|
|
clocks:
|
|
items:
|
|
- description: source clock
|
|
- description: HCLK which used for host
|
|
- description: independent source clock gate
|
|
- description: crypto clock used for data encrypt/decrypt (optional)
|
|
clock-names:
|
|
items:
|
|
- const: source
|
|
- const: hclk
|
|
- const: source_cg
|
|
- const: crypto
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: mediatek,mt8192-mmc
|
|
then:
|
|
properties:
|
|
clocks:
|
|
items:
|
|
- description: source clock
|
|
- description: HCLK which used for host
|
|
- description: independent source clock gate
|
|
- description: msdc subsys clock gate
|
|
- description: peripheral bus clock gate
|
|
- description: AXI bus clock gate
|
|
- description: AHB bus clock gate
|
|
clock-names:
|
|
items:
|
|
- const: source
|
|
- const: hclk
|
|
- const: source_cg
|
|
- const: sys_cg
|
|
- const: pclk_cg
|
|
- const: axi_cg
|
|
- const: ahb_cg
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/mt8173-clk.h>
|
|
mmc0: mmc@11230000 {
|
|
compatible = "mediatek,mt8173-mmc";
|
|
reg = <0x11230000 0x1000>;
|
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
|
|
vmmc-supply = <&mt6397_vemc_3v3_reg>;
|
|
vqmmc-supply = <&mt6397_vio18_reg>;
|
|
clocks = <&pericfg CLK_PERI_MSDC30_0>,
|
|
<&topckgen CLK_TOP_MSDC50_0_H_SEL>;
|
|
clock-names = "source", "hclk";
|
|
pinctrl-names = "default", "state_uhs";
|
|
pinctrl-0 = <&mmc0_pins_default>;
|
|
pinctrl-1 = <&mmc0_pins_uhs>;
|
|
assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
|
|
assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
|
|
hs400-ds-delay = <0x14015>;
|
|
mediatek,hs200-cmd-int-delay = <26>;
|
|
mediatek,hs400-cmd-int-delay = <14>;
|
|
mediatek,hs400-cmd-resp-sel-rising;
|
|
};
|
|
|
|
mmc3: mmc@11260000 {
|
|
compatible = "mediatek,mt8173-mmc";
|
|
reg = <0x11260000 0x1000>;
|
|
clock-names = "source", "hclk";
|
|
clocks = <&pericfg CLK_PERI_MSDC30_3>,
|
|
<&topckgen CLK_TOP_MSDC50_2_H_SEL>;
|
|
interrupt-names = "msdc", "sdio_wakeup";
|
|
interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_LOW 0>,
|
|
<&pio 23 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default", "state_uhs", "state_eint";
|
|
pinctrl-0 = <&mmc2_pins_default>;
|
|
pinctrl-1 = <&mmc2_pins_uhs>;
|
|
pinctrl-2 = <&mmc2_pins_eint>;
|
|
bus-width = <4>;
|
|
max-frequency = <200000000>;
|
|
cap-sd-highspeed;
|
|
sd-uhs-sdr104;
|
|
keep-power-in-suspend;
|
|
wakeup-source;
|
|
cap-sdio-irq;
|
|
no-mmc;
|
|
no-sd;
|
|
non-removable;
|
|
vmmc-supply = <&sdio_fixed_3v3>;
|
|
vqmmc-supply = <&mt6397_vgp3_reg>;
|
|
mmc-pwrseq = <&wifi_pwrseq>;
|
|
};
|
|
|
|
...
|