67 lines
1.7 KiB
YAML
67 lines
1.7 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/net/marvell,mvusb.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Marvell USB to MDIO Controller
|
|
|
|
maintainers:
|
|
- Tobias Waldekranz <tobias@waldekranz.com>
|
|
|
|
description: |+
|
|
This controller is mounted on development boards for Marvell's Link Street
|
|
family of Ethernet switches. It allows you to configure the switch's registers
|
|
using the standard MDIO interface.
|
|
|
|
Since the device is connected over USB, there is no strict requirement of
|
|
having a device tree representation of the device. But in order to use it with
|
|
the mv88e6xxx driver, you need a device tree node in which to place the switch
|
|
definition.
|
|
|
|
allOf:
|
|
- $ref: mdio.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: usb1286,1fa4
|
|
reg:
|
|
maxItems: 1
|
|
description: The USB port number on the host controller
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- "#address-cells"
|
|
- "#size-cells"
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
/* USB host controller */
|
|
usb {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
mdio@1 {
|
|
compatible = "usb1286,1fa4";
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
switch@0 {
|
|
compatible = "marvell,mv88e6190";
|
|
reg = <0x0>;
|
|
|
|
ports {
|
|
/* Port definitions */
|
|
};
|
|
|
|
mdio {
|
|
/* PHY definitions */
|
|
};
|
|
};
|
|
};
|
|
};
|