143 lines
3.2 KiB
YAML
143 lines
3.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/net/wireless/ti,wlcore.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Texas Instruments Wilink 6/7/8 (wl12xx/wl18xx) Wireless LAN Controller
|
|
|
|
maintainers:
|
|
- Tony Lindgren <tony@atomide.com>
|
|
|
|
description:
|
|
The wl12xx/wl18xx chips can be connected via SPI or via SDIO.
|
|
Note that the *-clock-frequency properties assume internal clocks. In case
|
|
of external clocks, new bindings (for parsing the clock nodes) have to be
|
|
added.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- ti,wl1271
|
|
- ti,wl1273
|
|
- ti,wl1281
|
|
- ti,wl1283
|
|
- ti,wl1285
|
|
- ti,wl1801
|
|
- ti,wl1805
|
|
- ti,wl1807
|
|
- ti,wl1831
|
|
- ti,wl1835
|
|
- ti,wl1837
|
|
|
|
reg:
|
|
maxItems: 1
|
|
description:
|
|
This is required when connected via SPI, and optional when connected via
|
|
SDIO.
|
|
|
|
interrupts:
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
interrupt-names:
|
|
items:
|
|
- const: irq
|
|
- const: wakeup
|
|
|
|
vwlan-supply:
|
|
description:
|
|
Points to the node of the regulator that powers/enable the wl12xx/wl18xx
|
|
chip. This is required when connected via SPI.
|
|
|
|
|
|
ref-clock-frequency:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: Reference clock frequency.
|
|
|
|
tcxo-clock-frequency:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: TCXO clock frequency.
|
|
|
|
clock-xtal:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description: Indicates that the clock is generated from XTAL.
|
|
|
|
required:
|
|
- compatible
|
|
- interrupts
|
|
|
|
allOf:
|
|
- $ref: /schemas/spi/spi-peripheral-props.yaml#
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- ti,wl1271
|
|
- ti,wl1273
|
|
- ti,wl1281
|
|
- ti,wl1283
|
|
then:
|
|
required:
|
|
- ref-clock-frequency
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
// For wl12xx family:
|
|
spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
wlcore1: wlcore@1 {
|
|
compatible = "ti,wl1271";
|
|
reg = <1>;
|
|
spi-max-frequency = <48000000>;
|
|
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
|
|
vwlan-supply = <&vwlan_fixed>;
|
|
clock-xtal;
|
|
ref-clock-frequency = <38400000>;
|
|
};
|
|
};
|
|
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
// For wl18xx family:
|
|
spi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
wlcore2: wlcore@0 {
|
|
compatible = "ti,wl1835";
|
|
reg = <0>;
|
|
spi-max-frequency = <48000000>;
|
|
interrupts = <27 IRQ_TYPE_EDGE_RISING>;
|
|
vwlan-supply = <&vwlan_fixed>;
|
|
};
|
|
};
|
|
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
// SDIO example:
|
|
mmc3 {
|
|
vmmc-supply = <&wlan_en_reg>;
|
|
bus-width = <4>;
|
|
cap-power-off-card;
|
|
keep-power-in-suspend;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
wlcore3: wlcore@2 {
|
|
compatible = "ti,wl1835";
|
|
reg = <2>;
|
|
interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|