233 lines
8.8 KiB
YAML
233 lines
8.8 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pci/snps,dw-pcie.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Synopsys DesignWare PCIe interface
|
|
|
|
maintainers:
|
|
- Jingoo Han <jingoohan1@gmail.com>
|
|
- Gustavo Pimentel <gustavo.pimentel@synopsys.com>
|
|
|
|
description: |
|
|
Synopsys DesignWare PCIe host controller
|
|
|
|
# Please create a separate DT-schema for your DWC PCIe Root Port controller
|
|
# and make sure it's assigned with the vendor-specific compatible string.
|
|
select:
|
|
properties:
|
|
compatible:
|
|
const: snps,dw-pcie
|
|
required:
|
|
- compatible
|
|
|
|
allOf:
|
|
- $ref: /schemas/pci/pci-bus.yaml#
|
|
- $ref: /schemas/pci/snps,dw-pcie-common.yaml#
|
|
|
|
properties:
|
|
reg:
|
|
description:
|
|
At least DBI reg-space and peripheral devices CFG-space outbound window
|
|
are required for the normal controller work. iATU memory IO region is
|
|
also required if the space is unrolled (IP-core version >= 4.80a).
|
|
minItems: 2
|
|
maxItems: 5
|
|
|
|
reg-names:
|
|
minItems: 2
|
|
maxItems: 5
|
|
items:
|
|
oneOf:
|
|
- description:
|
|
Basic DWC PCIe controller configuration-space accessible over
|
|
the DBI interface. This memory space is either activated with
|
|
CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region
|
|
with all spaces. Note iATU/eDMA CSRs are indirectly accessible
|
|
via the PL viewports on the DWC PCIe controllers older than
|
|
v4.80a.
|
|
const: dbi
|
|
- description:
|
|
Shadow DWC PCIe config-space registers. This space is selected
|
|
by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of
|
|
the PCI-SIG PCIe CFG-space with the shadow registers for some
|
|
PCI Header space, PCI Standard and Extended Structures. It's
|
|
mainly relevant for the end-point controller configuration,
|
|
but still there are some shadow registers available for the
|
|
Root Port mode too.
|
|
const: dbi2
|
|
- description:
|
|
External Local Bus registers. It's an application-dependent
|
|
registers normally defined by the platform engineers. The space
|
|
can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can
|
|
be accessed over some platform-specific means (for instance
|
|
as a part of a system controller).
|
|
enum: [ elbi, app ]
|
|
- description:
|
|
iATU/eDMA registers common for all device functions. It's an
|
|
unrolled memory space with the internal Address Translation
|
|
Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1
|
|
and CS2 = 1. For IP-core releases prior v4.80a, these registers
|
|
have been programmed via an indirect addressing scheme using a
|
|
set of viewport CSRs mapped into the PL space. Note iATU is
|
|
normally mapped to the 0x0 address of this region, while eDMA
|
|
is available at 0x80000 base address.
|
|
const: atu
|
|
- description:
|
|
Platform-specific eDMA registers. Some platforms may have eDMA
|
|
CSRs mapped in a non-standard base address. The registers offset
|
|
can be changed or the MS/LS-bits of the address can be attached
|
|
in an additional RTL block before the MEM-IO transactions reach
|
|
the DW PCIe slave interface.
|
|
const: dma
|
|
- description:
|
|
PHY/PCS configuration registers. Some platforms can have the
|
|
PCS and PHY CSRs accessible over a dedicated memory mapped
|
|
region, but mainly these registers are indirectly accessible
|
|
either by means of the embedded PHY viewport schema or by some
|
|
platform-specific method.
|
|
const: phy
|
|
- description:
|
|
Outbound iATU-capable memory-region which will be used to access
|
|
the peripheral PCIe devices configuration space.
|
|
const: config
|
|
- description:
|
|
Vendor-specific CSR names. Consider using the generic names above
|
|
for new bindings.
|
|
oneOf:
|
|
- description: See native 'elbi/app' CSR region for details.
|
|
enum: [ apb, mgmt, link, ulreg, appl ]
|
|
- description: See native 'atu' CSR region for details.
|
|
enum: [ atu_dma ]
|
|
- description: Syscon-related CSR regions.
|
|
enum: [ smu, mpu ]
|
|
- description: Tegra234 aperture
|
|
enum: [ ecam ]
|
|
allOf:
|
|
- contains:
|
|
const: dbi
|
|
- contains:
|
|
const: config
|
|
|
|
interrupts:
|
|
description:
|
|
DWC PCIe Root Port/Complex specific IRQ signals. At least MSI interrupt
|
|
signal is supposed to be specified for the host controller.
|
|
minItems: 1
|
|
maxItems: 26
|
|
|
|
interrupt-names:
|
|
minItems: 1
|
|
maxItems: 26
|
|
items:
|
|
oneOf:
|
|
- description:
|
|
Controller request to read or write virtual product data
|
|
from/to the VPD capability registers.
|
|
const: vpd
|
|
- description:
|
|
Link Equalization Request flag is set in the Link Status 2
|
|
register (applicable if the corresponding IRQ is enabled in
|
|
the Link Control 3 register).
|
|
const: l_eq
|
|
- description:
|
|
Indicates that the eDMA Tx/Rx transfer is complete or that an
|
|
error has occurred on the corresponding channel. eDMA can have
|
|
eight Tx (Write) and Rx (Read) eDMA channels thus supporting up
|
|
to 16 IRQ signals all together. Write eDMA channels shall go
|
|
first in the ordered row as per default edma_int[*] bus setup.
|
|
pattern: '^dma([0-9]|1[0-5])?$'
|
|
- description:
|
|
PCIe protocol correctable error or a Data Path protection
|
|
correctable error is detected by the automotive/safety
|
|
feature.
|
|
const: sft_ce
|
|
- description:
|
|
Indicates that the internal safety mechanism has detected an
|
|
uncorrectable error.
|
|
const: sft_ue
|
|
- description:
|
|
Application-specific IRQ raised depending on the vendor-specific
|
|
events basis.
|
|
const: app
|
|
- description:
|
|
DSP AXI MSI Interrupt detected. It gets de-asserted when there is
|
|
no more MSI interrupt pending. The interrupt is relevant to the
|
|
iMSI-RX - Integrated MSI Receiver (AXI bridge).
|
|
const: msi
|
|
- description:
|
|
Legacy A/B/C/D interrupt signal. Basically it's triggered by
|
|
receiving a Assert_INT{A,B,C,D}/Desassert_INT{A,B,C,D} message
|
|
from the downstream device.
|
|
pattern: "^int(a|b|c|d)$"
|
|
- description:
|
|
Error condition detected and a flag is set in the Root Error Status
|
|
register of the AER capability. It's asserted when the RC
|
|
internally generated an error or an error message is received by
|
|
the RC.
|
|
const: aer
|
|
- description:
|
|
PME message is received by the port. That means having the PME
|
|
status bit set in the Root Status register (the event is
|
|
supposed to be unmasked in the Root Control register).
|
|
const: pme
|
|
- description:
|
|
Hot-plug event is detected. That is a bit has been set in the
|
|
Slot Status register and the corresponding event is enabled in
|
|
the Slot Control register.
|
|
const: hp
|
|
- description:
|
|
Link Autonomous Bandwidth Status flag has been set in the Link
|
|
Status register (the event is supposed to be unmasked in the
|
|
Link Control register).
|
|
const: bw_au
|
|
- description:
|
|
Bandwidth Management Status flag has been set in the Link
|
|
Status register (the event is supposed to be unmasked in the
|
|
Link Control register).
|
|
const: bw_mg
|
|
- description:
|
|
Vendor-specific IRQ names. Consider using the generic names above
|
|
for new bindings.
|
|
oneOf:
|
|
- description: See native "app" IRQ for details
|
|
enum: [ intr ]
|
|
allOf:
|
|
- contains:
|
|
const: msi
|
|
|
|
additionalProperties: true
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- reg-names
|
|
|
|
examples:
|
|
- |
|
|
pcie@dfc00000 {
|
|
compatible = "snps,dw-pcie";
|
|
device_type = "pci";
|
|
reg = <0xdfc00000 0x0001000>, /* IP registers */
|
|
<0xd0000000 0x0002000>; /* Configuration space */
|
|
reg-names = "dbi", "config";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
|
|
<0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
|
|
bus-range = <0x0 0xff>;
|
|
|
|
interrupts = <25>, <24>;
|
|
interrupt-names = "msi", "hp";
|
|
#interrupt-cells = <1>;
|
|
|
|
reset-gpios = <&port0 0 1>;
|
|
|
|
phys = <&pcie_phy>;
|
|
phy-names = "pcie";
|
|
|
|
num-lanes = <1>;
|
|
max-link-speed = <3>;
|
|
};
|