126 lines
3.7 KiB
YAML
126 lines
3.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-tlmm.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm IPQ5332 TLMM pin controller
|
|
|
|
maintainers:
|
|
- Bjorn Andersson <andersson@kernel.org>
|
|
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
|
|
description: |
|
|
Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
|
|
|
|
allOf:
|
|
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,ipq5332-tlmm
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
"#interrupt-cells": true
|
|
gpio-controller: true
|
|
"#gpio-cells": true
|
|
gpio-ranges: true
|
|
wakeup-parent: true
|
|
|
|
gpio-reserved-ranges:
|
|
minItems: 1
|
|
maxItems: 27
|
|
|
|
gpio-line-names:
|
|
maxItems: 53
|
|
|
|
patternProperties:
|
|
"-state$":
|
|
oneOf:
|
|
- $ref: "#/$defs/qcom-ipq5332-tlmm-state"
|
|
- patternProperties:
|
|
"-pins$":
|
|
$ref: "#/$defs/qcom-ipq5332-tlmm-state"
|
|
additionalProperties: false
|
|
|
|
$defs:
|
|
qcom-ipq5332-tlmm-state:
|
|
type: object
|
|
description:
|
|
Pinctrl node's client devices use subnodes for desired pin configuration.
|
|
Client device subnodes use below standard properties.
|
|
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this
|
|
subnode.
|
|
items:
|
|
pattern: "^gpio([0-9]|[1-4][0-9]|5[0-2])$"
|
|
minItems: 1
|
|
maxItems: 36
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins.
|
|
|
|
enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
|
|
atest_tic, audio_pri, audio_pri0, audio_pri1, audio_sec,
|
|
audio_sec0, audio_sec1, blsp0_i2c, blsp0_spi, blsp0_uart0,
|
|
blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1,
|
|
blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1,
|
|
blsp2_spi, blsp2_spi0, blsp2_spi1, core_voltage, cri_trng0,
|
|
cri_trng1, cri_trng2, cri_trng3, cxc_clk, cxc_data, dbg_out,
|
|
gcc_plltest, gcc_tlmm, gpio, lock_det, mac0, mac1, mdc0, mdc1,
|
|
mdio0, mdio1, pc, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake,
|
|
pcie2_clk, pcie2_wake, pll_test, prng_rosc0, prng_rosc1,
|
|
prng_rosc2, prng_rosc3, pta, pwm0, pwm1, pwm2, pwm3,
|
|
qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
|
|
qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
|
|
qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
|
|
qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
|
|
qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
|
|
qdss_tracedata_b, qspi_data, qspi_clk, qspi_cs, resout, rx0,
|
|
rx1, sdc_data, sdc_clk, sdc_cmd, tsens_max, wci_txd, wci_rxd,
|
|
wsi_clk, wsi_clk3, wsi_data, wsi_data3, wsis_reset, xfem ]
|
|
|
|
required:
|
|
- pins
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
tlmm: pinctrl@1000000 {
|
|
compatible = "qcom,ipq5332-tlmm";
|
|
reg = <0x01000000 0x300000>;
|
|
gpio-controller;
|
|
#gpio-cells = <0x2>;
|
|
gpio-ranges = <&tlmm 0 0 53>;
|
|
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <0x2>;
|
|
|
|
serial0-state {
|
|
pins = "gpio18", "gpio19";
|
|
function = "blsp0_uart0";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
};
|