129 lines
3.9 KiB
YAML
129 lines
3.9 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,ipq8074-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm IPQ8074 TLMM pin controller
|
|
|
|
maintainers:
|
|
- Bjorn Andersson <andersson@kernel.org>
|
|
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
|
|
description:
|
|
Top Level Mode Multiplexer pin controller in Qualcomm IPQ8074 SoC.
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,ipq8074-pinctrl
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
"#interrupt-cells": true
|
|
gpio-controller: true
|
|
"#gpio-cells": true
|
|
gpio-ranges: true
|
|
wakeup-parent: true
|
|
|
|
gpio-reserved-ranges:
|
|
minItems: 1
|
|
maxItems: 35
|
|
|
|
gpio-line-names:
|
|
maxItems: 70
|
|
|
|
patternProperties:
|
|
"-state$":
|
|
oneOf:
|
|
- $ref: "#/$defs/qcom-ipq8074-tlmm-state"
|
|
- patternProperties:
|
|
"-pins$":
|
|
$ref: "#/$defs/qcom-ipq8074-tlmm-state"
|
|
additionalProperties: false
|
|
|
|
$defs:
|
|
qcom-ipq8074-tlmm-state:
|
|
type: object
|
|
description:
|
|
Pinctrl node's client devices use subnodes for desired pin configuration.
|
|
Client device subnodes use below standard properties.
|
|
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this
|
|
subnode.
|
|
items:
|
|
pattern: "^gpio([0-9]|[1-6][0-9]|70)$"
|
|
minItems: 1
|
|
maxItems: 36
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins.
|
|
|
|
enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
|
|
atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync,
|
|
audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync,
|
|
audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c,
|
|
blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart,
|
|
blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2,
|
|
blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0,
|
|
blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi,
|
|
blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, cxc0,
|
|
cxc1, dbg_out, gcc_plltest, gcc_tlmm, ldo_en, ldo_update, led0,
|
|
led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, mac1_sa1, mac1_sa2,
|
|
mac1_sa3, mac2_sa0, mac2_sa1, mdc, mdio, pcie0_clk, pcie0_rst,
|
|
pcie0_wake, pcie1_clk, pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx,
|
|
pcm_fsync, pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0,
|
|
pta1_1, pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3,
|
|
qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
|
|
qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
|
|
qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
|
|
qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
|
|
qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
|
|
qdss_tracedata_b, qpic, rx0, rx1, rx2, sd_card, sd_write,
|
|
tsens_max, wci2a, wci2b, wci2c, wci2d ]
|
|
|
|
required:
|
|
- pins
|
|
|
|
allOf:
|
|
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
tlmm: pinctrl@1000000 {
|
|
compatible = "qcom,ipq8074-pinctrl";
|
|
reg = <0x01000000 0x300000>;
|
|
gpio-controller;
|
|
#gpio-cells = <0x2>;
|
|
gpio-ranges = <&tlmm 0 0 70>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <0x2>;
|
|
|
|
serial4-state {
|
|
pins = "gpio23", "gpio24";
|
|
function = "blsp4_uart1";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
};
|