113 lines
2.6 KiB
YAML
113 lines
2.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9615-pinctrl.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm Technologies, Inc. MDM9615 TLMM block
|
|
|
|
maintainers:
|
|
- Bjorn Andersson <andersson@kernel.org>
|
|
|
|
description: Top Level Mode Multiplexer pin controller in Qualcomm MDM9615 SoC.
|
|
|
|
$ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: qcom,mdm9615-pinctrl
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
'#interrupt-cells': true
|
|
gpio-controller: true
|
|
'#gpio-cells': true
|
|
gpio-ranges: true
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
patternProperties:
|
|
"-state$":
|
|
oneOf:
|
|
- $ref: "#/$defs/qcom-mdm9615-pinctrl-state"
|
|
- patternProperties:
|
|
"-pins$":
|
|
$ref: "#/$defs/qcom-mdm9615-pinctrl-state"
|
|
additionalProperties: false
|
|
|
|
$defs:
|
|
qcom-mdm9615-pinctrl-state:
|
|
type: object
|
|
description:
|
|
Pinctrl node's client devices use subnodes for desired pin configuration.
|
|
Client device subnodes use below standard properties.
|
|
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
pins:
|
|
description:
|
|
List of gpio pins affected by the properties specified in this
|
|
subnode.
|
|
items:
|
|
pattern: "^gpio([0-9]|[1-7][0-9]|8[0-7])$"
|
|
minItems: 1
|
|
maxItems: 16
|
|
|
|
function:
|
|
description:
|
|
Specify the alternative function to be configured for the specified
|
|
pins.
|
|
|
|
enum: [ gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart,
|
|
sdc2, ebi2_lcdc, ps_hold, prim_audio, sec_audio, cdc_mclk, ]
|
|
|
|
required:
|
|
- pins
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
tlmm: pinctrl@1000000 {
|
|
compatible = "qcom,mdm9615-pinctrl";
|
|
reg = <0x01000000 0x300000>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
gpio-ranges = <&msmgpio 0 0 88>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
gsbi3-state {
|
|
pins = "gpio8", "gpio9", "gpio10", "gpio11";
|
|
function = "gsbi3";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
gsbi5-i2c-state {
|
|
sda-pins {
|
|
pins = "gpio16";
|
|
function = "gsbi5_i2c";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
scl-pins {
|
|
pins = "gpio17";
|
|
function = "gsbi5_i2c";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|