44 lines
1.1 KiB
YAML
44 lines
1.1 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Maxim DS2760
|
|
|
|
maintainers:
|
|
- Sebastian Reichel <sre@kernel.org>
|
|
|
|
description: |
|
|
The ds2760 is a w1 slave device and must hence have its sub-node in
|
|
DT under a w1 bus master node.
|
|
|
|
allOf:
|
|
- $ref: power-supply.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: maxim,ds2760
|
|
|
|
maxim,pmod-enabled:
|
|
description: |
|
|
Allow the DS2760 to enter sleep mode when the DQ line goes low for more than 2 seconds
|
|
and leave sleep Mode when the DQ line goes high.
|
|
type: boolean
|
|
|
|
maxim,cache-time-ms:
|
|
description: |
|
|
Time im milliseconds to cache the data for.
|
|
When this time expires, the values are read again from the hardware.
|
|
Defaults to 1000.
|
|
|
|
rated-capacity-microamp-hours:
|
|
description: |
|
|
The rated capacity of the battery, in mAh.
|
|
If not specified, the value stored in the non-volatile chip memory is used.
|
|
|
|
required:
|
|
- compatible
|
|
|
|
unevaluatedProperties: false
|