91 lines
2.6 KiB
YAML
91 lines
2.6 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/power/supply/richtek,rt9455.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Richtek rt9455 battery charger
|
|
|
|
maintainers:
|
|
- Sebastian Reichel <sre@kernel.org>
|
|
|
|
allOf:
|
|
- $ref: power-supply.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: richtek,rt9455
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
richtek,output-charge-current:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: output current from the charger to the battery, in uA.
|
|
|
|
richtek,end-of-charge-percentage:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: |
|
|
percent of the output charge current. When the current in constant-voltage phase drops
|
|
below output_charge_current x end-of-charge-percentage, charge is terminated.
|
|
|
|
richtek,battery-regulation-voltage:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: maximum battery voltage in uV.
|
|
|
|
richtek,boost-output-voltage:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: |
|
|
maximum voltage provided to consumer devices, when the charger is in boost mode, in uV.
|
|
|
|
richtek,min-input-voltage-regulation:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: |
|
|
input voltage level in uV, used to decrease voltage level when the over current of the
|
|
input power source occurs. This prevents input voltage drop due to insufficient
|
|
current provided by the power source. Defaults to 4500000 uV (4.5V).
|
|
|
|
richtek,avg-input-current-regulation:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: |
|
|
input current value in uA drained by the charger from the power source.
|
|
Defaults to 500000 uA (500mA).
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- richtek,output-charge-current
|
|
- richtek,end-of-charge-percentage
|
|
- richtek,battery-regulation-voltage
|
|
- richtek,boost-output-voltage
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
charger@22 {
|
|
compatible = "richtek,rt9455";
|
|
reg = <0x22>;
|
|
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
richtek,output-charge-current = <500000>;
|
|
richtek,end-of-charge-percentage = <10>;
|
|
richtek,battery-regulation-voltage = <4200000>;
|
|
richtek,boost-output-voltage = <5050000>;
|
|
|
|
richtek,min-input-voltage-regulation = <4500000>;
|
|
richtek,avg-input-current-regulation = <500000>;
|
|
};
|
|
};
|