65 lines
1.7 KiB
YAML
65 lines
1.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/serio/ps2-gpio.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: GPIO based PS/2
|
|
|
|
maintainers:
|
|
- Danilo Krummrich <danilokrummrich@dk-develop.de>
|
|
|
|
properties:
|
|
compatible:
|
|
const: ps2-gpio
|
|
|
|
data-gpios:
|
|
description:
|
|
the gpio used for the data signal - this should be flagged as
|
|
active high using open drain with (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)
|
|
from <dt-bindings/gpio/gpio.h> since the signal is open drain by
|
|
definition
|
|
maxItems: 1
|
|
|
|
clk-gpios:
|
|
description:
|
|
the gpio used for the clock signal - this should be flagged as
|
|
active high using open drain with (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)
|
|
from <dt-bindings/gpio/gpio.h> since the signal is open drain by
|
|
definition
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
description:
|
|
The given interrupt should trigger on the falling edge of the clock line.
|
|
maxItems: 1
|
|
|
|
write-enable:
|
|
type: boolean
|
|
description:
|
|
Indicates whether write function is provided to serio device. Possibly
|
|
providing the write function will not work, because of the tough timing
|
|
requirements.
|
|
|
|
required:
|
|
- compatible
|
|
- data-gpios
|
|
- clk-gpios
|
|
- interrupts
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
ps2 {
|
|
compatible = "ps2-gpio";
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
|
|
data-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
clk-gpios = <&gpio 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
write-enable;
|
|
};
|