linux-zen-desktop/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml

208 lines
5.1 KiB
YAML

# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/snps,dw-apb-ssi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface
maintainers:
- Mark Brown <broonie@kernel.org>
allOf:
- $ref: spi-controller.yaml#
- if:
properties:
compatible:
contains:
enum:
- mscc,ocelot-spi
- mscc,jaguar2-spi
then:
properties:
reg:
minItems: 2
- if:
properties:
compatible:
contains:
enum:
- baikal,bt1-sys-ssi
then:
properties:
mux-controls:
maxItems: 1
required:
- mux-controls
else:
required:
- interrupts
- if:
properties:
compatible:
contains:
const: amd,pensando-elba-spi
then:
required:
- amd,pensando-elba-syscon
else:
properties:
amd,pensando-elba-syscon: false
properties:
compatible:
oneOf:
- description: Generic DW SPI Controller
enum:
- snps,dw-apb-ssi
- snps,dwc-ssi-1.01a
- description: Microsemi Ocelot/Jaguar2 SoC SPI Controller
items:
- enum:
- mscc,ocelot-spi
- mscc,jaguar2-spi
- const: snps,dw-apb-ssi
- description: Microchip Sparx5 SoC SPI Controller
const: microchip,sparx5-spi
- description: Amazon Alpine SPI Controller
const: amazon,alpine-dw-apb-ssi
- description: Renesas RZ/N1 SPI Controller
items:
- const: renesas,rzn1-spi
- const: snps,dw-apb-ssi
- description: Intel Keem Bay SPI Controller
const: intel,keembay-ssi
- description: Intel Thunder Bay SPI Controller
const: intel,thunderbay-ssi
- description: Intel Mount Evans Integrated Management Complex SPI Controller
const: intel,mountevans-imc-ssi
- description: AMD Pensando Elba SoC SPI Controller
const: amd,pensando-elba-spi
- description: Baikal-T1 SPI Controller
const: baikal,bt1-ssi
- description: Baikal-T1 System Boot SPI Controller
const: baikal,bt1-sys-ssi
- description: Canaan Kendryte K210 SoS SPI Controller
const: canaan,k210-spi
- description: Renesas RZ/N1 SPI Controller
items:
- enum:
- renesas,r9a06g032-spi # RZ/N1D
- renesas,r9a06g033-spi # RZ/N1S
- const: renesas,rzn1-spi # RZ/N1
reg:
minItems: 1
items:
- description: DW APB SSI controller memory mapped registers
- description: SPI MST region map or directly mapped SPI ROM
interrupts:
maxItems: 1
clocks:
minItems: 1
items:
- description: SPI Controller reference clock source
- description: APB interface clock source
clock-names:
minItems: 1
items:
- const: ssi_clk
- const: pclk
resets:
maxItems: 1
reset-names:
const: spi
reg-io-width:
description: I/O register width (in bytes) implemented by this device
default: 4
enum: [ 2, 4 ]
num-cs:
default: 4
minimum: 1
maximum: 4
dmas:
items:
- description: TX DMA Channel
- description: RX DMA Channel
dma-names:
items:
- const: tx
- const: rx
rx-sample-delay-ns:
default: 0
description: |
Default value of the rx-sample-delay-ns property.
This value will be used if the property is not explicitly defined
for a SPI slave device.
SPI Rx sample delay offset, unit is nanoseconds.
The delay from the default sample time before the actual sample of the
rxd input signal occurs. The "rx_sample_delay" is an optional feature
of the designware controller, and the upper limit is also subject to
controller configuration.
amd,pensando-elba-syscon:
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
Block address to control SPI chip-selects. The Elba SoC system controller
provides an interface to override the native DWC SSI CS control.
patternProperties:
"^.*@[0-9a-f]+$":
type: object
properties:
reg:
minimum: 0
maximum: 3
unevaluatedProperties: false
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
- clocks
examples:
- |
spi@fff00000 {
compatible = "snps,dw-apb-ssi";
reg = <0xfff00000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 154 4>;
clocks = <&spi_m_clk>;
num-cs = <2>;
cs-gpios = <&gpio0 13 0>,
<&gpio0 14 0>;
rx-sample-delay-ns = <3>;
flash@1 {
compatible = "spi-nand";
reg = <1>;
rx-sample-delay-ns = <7>;
};
};
- |
spi@1f040100 {
compatible = "baikal,bt1-sys-ssi";
reg = <0x1f040100 0x900>,
<0x1c000000 0x1000000>;
#address-cells = <1>;
#size-cells = <0>;
mux-controls = <&boot_mux>;
clocks = <&ccu_sys>;
clock-names = "ssi_clk";
};
...