536 lines
13 KiB
YAML
536 lines
13 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Qualcomm SuperSpeed DWC3 USB SoC controller
|
|
|
|
maintainers:
|
|
- Wesley Cheng <quic_wcheng@quicinc.com>
|
|
|
|
properties:
|
|
compatible:
|
|
items:
|
|
- enum:
|
|
- qcom,ipq4019-dwc3
|
|
- qcom,ipq6018-dwc3
|
|
- qcom,ipq8064-dwc3
|
|
- qcom,ipq8074-dwc3
|
|
- qcom,ipq9574-dwc3
|
|
- qcom,msm8953-dwc3
|
|
- qcom,msm8994-dwc3
|
|
- qcom,msm8996-dwc3
|
|
- qcom,msm8998-dwc3
|
|
- qcom,qcm2290-dwc3
|
|
- qcom,qcs404-dwc3
|
|
- qcom,sa8775p-dwc3
|
|
- qcom,sc7180-dwc3
|
|
- qcom,sc7280-dwc3
|
|
- qcom,sc8280xp-dwc3
|
|
- qcom,sdm660-dwc3
|
|
- qcom,sdm670-dwc3
|
|
- qcom,sdm845-dwc3
|
|
- qcom,sdx55-dwc3
|
|
- qcom,sdx65-dwc3
|
|
- qcom,sm4250-dwc3
|
|
- qcom,sm6115-dwc3
|
|
- qcom,sm6125-dwc3
|
|
- qcom,sm6350-dwc3
|
|
- qcom,sm6375-dwc3
|
|
- qcom,sm8150-dwc3
|
|
- qcom,sm8250-dwc3
|
|
- qcom,sm8350-dwc3
|
|
- qcom,sm8450-dwc3
|
|
- qcom,sm8550-dwc3
|
|
- const: qcom,dwc3
|
|
|
|
reg:
|
|
description: Offset and length of register set for QSCRATCH wrapper
|
|
maxItems: 1
|
|
|
|
"#address-cells":
|
|
enum: [ 1, 2 ]
|
|
|
|
"#size-cells":
|
|
enum: [ 1, 2 ]
|
|
|
|
ranges: true
|
|
|
|
power-domains:
|
|
description: specifies a phandle to PM domain provider node
|
|
maxItems: 1
|
|
|
|
required-opps:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
description: |
|
|
Several clocks are used, depending on the variant. Typical ones are::
|
|
- cfg_noc:: System Config NOC clock.
|
|
- core:: Master/Core clock, has to be >= 125 MHz for SS operation and >=
|
|
60MHz for HS operation.
|
|
- iface:: System bus AXI clock.
|
|
- sleep:: Sleep clock, used for wakeup when USB3 core goes into low
|
|
power mode (U3).
|
|
- mock_utmi:: Mock utmi clock needed for ITP/SOF generation in host
|
|
mode. Its frequency should be 19.2MHz.
|
|
minItems: 1
|
|
maxItems: 9
|
|
|
|
clock-names:
|
|
minItems: 1
|
|
maxItems: 9
|
|
|
|
assigned-clocks:
|
|
items:
|
|
- description: Phandle and clock specifier of MOCK_UTMI_CLK.
|
|
- description: Phandle and clock specifoer of MASTER_CLK.
|
|
|
|
assigned-clock-rates:
|
|
items:
|
|
- description: Must be 19.2MHz (19200000).
|
|
- description: Must be >= 60 MHz in HS mode, >= 125 MHz in SS mode.
|
|
resets:
|
|
maxItems: 1
|
|
|
|
interconnects:
|
|
maxItems: 2
|
|
|
|
interconnect-names:
|
|
items:
|
|
- const: usb-ddr
|
|
- const: apps-usb
|
|
|
|
interrupts:
|
|
minItems: 1
|
|
maxItems: 4
|
|
|
|
interrupt-names:
|
|
minItems: 1
|
|
maxItems: 4
|
|
|
|
qcom,select-utmi-as-pipe-clk:
|
|
description:
|
|
If present, disable USB3 pipe_clk requirement.
|
|
Used when dwc3 operates without SSPHY and only
|
|
HS/FS/LS modes are supported.
|
|
type: boolean
|
|
|
|
wakeup-source: true
|
|
|
|
# Required child node:
|
|
|
|
patternProperties:
|
|
"^usb@[0-9a-f]+$":
|
|
$ref: snps,dwc3.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
wakeup-source: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- "#address-cells"
|
|
- "#size-cells"
|
|
- ranges
|
|
- clocks
|
|
- clock-names
|
|
- interrupts
|
|
- interrupt-names
|
|
|
|
allOf:
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,ipq4019-dwc3
|
|
then:
|
|
properties:
|
|
clocks:
|
|
maxItems: 3
|
|
clock-names:
|
|
items:
|
|
- const: core
|
|
- const: sleep
|
|
- const: mock_utmi
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,ipq8064-dwc3
|
|
then:
|
|
properties:
|
|
clocks:
|
|
items:
|
|
- description: Master/Core clock, has to be >= 125 MHz
|
|
for SS operation and >= 60MHz for HS operation.
|
|
clock-names:
|
|
items:
|
|
- const: core
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,ipq9574-dwc3
|
|
- qcom,msm8953-dwc3
|
|
- qcom,msm8996-dwc3
|
|
- qcom,msm8998-dwc3
|
|
- qcom,sa8775p-dwc3
|
|
- qcom,sc7180-dwc3
|
|
- qcom,sc7280-dwc3
|
|
- qcom,sdm670-dwc3
|
|
- qcom,sdm845-dwc3
|
|
- qcom,sdx55-dwc3
|
|
- qcom,sm6350-dwc3
|
|
then:
|
|
properties:
|
|
clocks:
|
|
maxItems: 5
|
|
clock-names:
|
|
items:
|
|
- const: cfg_noc
|
|
- const: core
|
|
- const: iface
|
|
- const: sleep
|
|
- const: mock_utmi
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,ipq6018-dwc3
|
|
then:
|
|
properties:
|
|
clocks:
|
|
minItems: 3
|
|
maxItems: 4
|
|
clock-names:
|
|
oneOf:
|
|
- items:
|
|
- const: core
|
|
- const: sleep
|
|
- const: mock_utmi
|
|
- items:
|
|
- const: cfg_noc
|
|
- const: core
|
|
- const: sleep
|
|
- const: mock_utmi
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,ipq8074-dwc3
|
|
then:
|
|
properties:
|
|
clocks:
|
|
maxItems: 4
|
|
clock-names:
|
|
items:
|
|
- const: cfg_noc
|
|
- const: core
|
|
- const: sleep
|
|
- const: mock_utmi
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,msm8994-dwc3
|
|
- qcom,qcs404-dwc3
|
|
then:
|
|
properties:
|
|
clocks:
|
|
maxItems: 4
|
|
clock-names:
|
|
items:
|
|
- const: core
|
|
- const: iface
|
|
- const: sleep
|
|
- const: mock_utmi
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,sc8280xp-dwc3
|
|
then:
|
|
properties:
|
|
clocks:
|
|
maxItems: 9
|
|
clock-names:
|
|
items:
|
|
- const: cfg_noc
|
|
- const: core
|
|
- const: iface
|
|
- const: sleep
|
|
- const: mock_utmi
|
|
- const: noc_aggr
|
|
- const: noc_aggr_north
|
|
- const: noc_aggr_south
|
|
- const: noc_sys
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,sdm660-dwc3
|
|
then:
|
|
properties:
|
|
clocks:
|
|
minItems: 6
|
|
clock-names:
|
|
items:
|
|
- const: cfg_noc
|
|
- const: core
|
|
- const: iface
|
|
- const: sleep
|
|
- const: mock_utmi
|
|
- const: bus
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,qcm2290-dwc3
|
|
- qcom,sm6115-dwc3
|
|
- qcom,sm6125-dwc3
|
|
- qcom,sm8150-dwc3
|
|
- qcom,sm8250-dwc3
|
|
- qcom,sm8450-dwc3
|
|
- qcom,sm8550-dwc3
|
|
then:
|
|
properties:
|
|
clocks:
|
|
minItems: 6
|
|
clock-names:
|
|
items:
|
|
- const: cfg_noc
|
|
- const: core
|
|
- const: iface
|
|
- const: sleep
|
|
- const: mock_utmi
|
|
- const: xo
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,sm8350-dwc3
|
|
then:
|
|
properties:
|
|
clocks:
|
|
minItems: 5
|
|
maxItems: 6
|
|
clock-names:
|
|
minItems: 5
|
|
items:
|
|
- const: cfg_noc
|
|
- const: core
|
|
- const: iface
|
|
- const: sleep
|
|
- const: mock_utmi
|
|
- const: xo
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,ipq4019-dwc3
|
|
- qcom,ipq6018-dwc3
|
|
- qcom,ipq8064-dwc3
|
|
- qcom,ipq8074-dwc3
|
|
- qcom,msm8994-dwc3
|
|
- qcom,qcs404-dwc3
|
|
- qcom,sc7180-dwc3
|
|
- qcom,sdm670-dwc3
|
|
- qcom,sdm845-dwc3
|
|
- qcom,sdx55-dwc3
|
|
- qcom,sdx65-dwc3
|
|
- qcom,sm4250-dwc3
|
|
- qcom,sm6125-dwc3
|
|
- qcom,sm6350-dwc3
|
|
- qcom,sm8150-dwc3
|
|
- qcom,sm8250-dwc3
|
|
- qcom,sm8350-dwc3
|
|
- qcom,sm8450-dwc3
|
|
- qcom,sm8550-dwc3
|
|
then:
|
|
properties:
|
|
interrupts:
|
|
items:
|
|
- description: The interrupt that is asserted
|
|
when a wakeup event is received on USB2 bus.
|
|
- description: The interrupt that is asserted
|
|
when a wakeup event is received on USB3 bus.
|
|
- description: Wakeup event on DM line.
|
|
- description: Wakeup event on DP line.
|
|
interrupt-names:
|
|
items:
|
|
- const: hs_phy_irq
|
|
- const: ss_phy_irq
|
|
- const: dm_hs_phy_irq
|
|
- const: dp_hs_phy_irq
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,msm8953-dwc3
|
|
- qcom,msm8996-dwc3
|
|
- qcom,msm8998-dwc3
|
|
- qcom,sm6115-dwc3
|
|
then:
|
|
properties:
|
|
interrupts:
|
|
maxItems: 2
|
|
interrupt-names:
|
|
items:
|
|
- const: hs_phy_irq
|
|
- const: ss_phy_irq
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,sdm660-dwc3
|
|
then:
|
|
properties:
|
|
interrupts:
|
|
minItems: 1
|
|
maxItems: 2
|
|
interrupt-names:
|
|
minItems: 1
|
|
items:
|
|
- const: hs_phy_irq
|
|
- const: ss_phy_irq
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,sc7280-dwc3
|
|
then:
|
|
properties:
|
|
interrupts:
|
|
minItems: 3
|
|
maxItems: 4
|
|
interrupt-names:
|
|
minItems: 3
|
|
items:
|
|
- const: hs_phy_irq
|
|
- const: dp_hs_phy_irq
|
|
- const: dm_hs_phy_irq
|
|
- const: ss_phy_irq
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,sc8280xp-dwc3
|
|
then:
|
|
properties:
|
|
interrupts:
|
|
maxItems: 4
|
|
interrupt-names:
|
|
items:
|
|
- const: pwr_event
|
|
- const: dp_hs_phy_irq
|
|
- const: dm_hs_phy_irq
|
|
- const: ss_phy_irq
|
|
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
enum:
|
|
- qcom,sa8775p-dwc3
|
|
then:
|
|
properties:
|
|
interrupts:
|
|
minItems: 3
|
|
maxItems: 4
|
|
interrupt-names:
|
|
minItems: 3
|
|
items:
|
|
- const: pwr_event
|
|
- const: dp_hs_phy_irq
|
|
- const: dm_hs_phy_irq
|
|
- const: ss_phy_irq
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
soc {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
usb@a6f8800 {
|
|
compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
|
|
reg = <0 0x0a6f8800 0 0x400>;
|
|
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
|
|
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
|
|
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
|
|
<&gcc GCC_USB30_PRIM_SLEEP_CLK>,
|
|
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
|
|
clock-names = "cfg_noc",
|
|
"core",
|
|
"iface",
|
|
"sleep",
|
|
"mock_utmi";
|
|
|
|
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
|
|
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
|
|
assigned-clock-rates = <19200000>, <150000000>;
|
|
|
|
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "hs_phy_irq", "ss_phy_irq",
|
|
"dm_hs_phy_irq", "dp_hs_phy_irq";
|
|
|
|
power-domains = <&gcc USB30_PRIM_GDSC>;
|
|
|
|
resets = <&gcc GCC_USB30_PRIM_BCR>;
|
|
|
|
usb@a600000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0 0x0a600000 0 0xcd00>;
|
|
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
|
|
iommus = <&apps_smmu 0x740 0>;
|
|
snps,dis_u2_susphy_quirk;
|
|
snps,dis_enblslpm_quirk;
|
|
phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
};
|
|
};
|
|
};
|