69 lines
1.7 KiB
YAML
69 lines
1.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/watchdog/linux,wdt-gpio.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: GPIO-controlled Watchdog
|
|
|
|
maintainers:
|
|
- Guenter Roeck <linux@roeck-us.net>
|
|
- Robert Marko <robert.marko@sartura.hr>
|
|
|
|
properties:
|
|
compatible:
|
|
const: linux,wdt-gpio
|
|
|
|
gpios:
|
|
description: gpio connection to WDT reset pin
|
|
maxItems: 1
|
|
|
|
hw_algo:
|
|
description: The algorithm used by the driver.
|
|
oneOf:
|
|
- description:
|
|
Either a high-to-low or a low-to-high transition clears the WDT counter.
|
|
The watchdog timer is disabled when GPIO is left floating or connected
|
|
to a three-state buffer.
|
|
const: toggle
|
|
- description:
|
|
Low or high level starts counting WDT timeout, the opposite level
|
|
disables the WDT.
|
|
Active level is determined by the GPIO flags.
|
|
const: level
|
|
|
|
hw_margin_ms:
|
|
description: Maximum time to reset watchdog circuit (milliseconds).
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 2
|
|
maximum: 65535
|
|
|
|
always-running:
|
|
type: boolean
|
|
description:
|
|
If the watchdog timer cannot be disabled, add this flag to have the driver
|
|
keep toggling the signal without a client.
|
|
It will only cease to toggle the signal when the device is open and the
|
|
timeout elapsed.
|
|
|
|
required:
|
|
- compatible
|
|
- gpios
|
|
- hw_algo
|
|
- hw_margin_ms
|
|
|
|
allOf:
|
|
- $ref: watchdog.yaml#
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
watchdog {
|
|
compatible = "linux,wdt-gpio";
|
|
gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
|
|
hw_algo = "toggle";
|
|
hw_margin_ms = <1600>;
|
|
};
|