837 lines
30 KiB
ReStructuredText
837 lines
30 KiB
ReStructuredText
.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
|
|
.. c:namespace:: V4L
|
|
|
|
.. _buffer:
|
|
|
|
*******
|
|
Buffers
|
|
*******
|
|
|
|
A buffer contains data exchanged by application and driver using one of
|
|
the Streaming I/O methods. In the multi-planar API, the data is held in
|
|
planes, while the buffer structure acts as a container for the planes.
|
|
Only pointers to buffers (planes) are exchanged, the data itself is not
|
|
copied. These pointers, together with meta-information like timestamps
|
|
or field parity, are stored in a struct :c:type:`v4l2_buffer`,
|
|
argument to the :ref:`VIDIOC_QUERYBUF`,
|
|
:ref:`VIDIOC_QBUF <VIDIOC_QBUF>` and
|
|
:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl. In the multi-planar API,
|
|
some plane-specific members of struct :c:type:`v4l2_buffer`,
|
|
such as pointers and sizes for each plane, are stored in
|
|
struct :c:type:`v4l2_plane` instead. In that case,
|
|
struct :c:type:`v4l2_buffer` contains an array of plane structures.
|
|
|
|
Dequeued video buffers come with timestamps. The driver decides at which
|
|
part of the frame and with which clock the timestamp is taken. Please
|
|
see flags in the masks ``V4L2_BUF_FLAG_TIMESTAMP_MASK`` and
|
|
``V4L2_BUF_FLAG_TSTAMP_SRC_MASK`` in :ref:`buffer-flags`. These flags
|
|
are always valid and constant across all buffers during the whole video
|
|
stream. Changes in these flags may take place as a side effect of
|
|
:ref:`VIDIOC_S_INPUT <VIDIOC_G_INPUT>` or
|
|
:ref:`VIDIOC_S_OUTPUT <VIDIOC_G_OUTPUT>` however. The
|
|
``V4L2_BUF_FLAG_TIMESTAMP_COPY`` timestamp type which is used by e.g. on
|
|
mem-to-mem devices is an exception to the rule: the timestamp source
|
|
flags are copied from the OUTPUT video buffer to the CAPTURE video
|
|
buffer.
|
|
|
|
Interactions between formats, controls and buffers
|
|
==================================================
|
|
|
|
V4L2 exposes parameters that influence the buffer size, or the way data is
|
|
laid out in the buffer. Those parameters are exposed through both formats and
|
|
controls. One example of such a control is the ``V4L2_CID_ROTATE`` control
|
|
that modifies the direction in which pixels are stored in the buffer, as well
|
|
as the buffer size when the selected format includes padding at the end of
|
|
lines.
|
|
|
|
The set of information needed to interpret the content of a buffer (e.g. the
|
|
pixel format, the line stride, the tiling orientation or the rotation) is
|
|
collectively referred to in the rest of this section as the buffer layout.
|
|
|
|
Controls that can modify the buffer layout shall set the
|
|
``V4L2_CTRL_FLAG_MODIFY_LAYOUT`` flag.
|
|
|
|
Modifying formats or controls that influence the buffer size or layout require
|
|
the stream to be stopped. Any attempt at such a modification while the stream
|
|
is active shall cause the ioctl setting the format or the control to return
|
|
the ``EBUSY`` error code. In that case drivers shall also set the
|
|
``V4L2_CTRL_FLAG_GRABBED`` flag when calling
|
|
:c:func:`VIDIOC_QUERYCTRL` or :c:func:`VIDIOC_QUERY_EXT_CTRL` for such a
|
|
control while the stream is active.
|
|
|
|
.. note::
|
|
|
|
The :c:func:`VIDIOC_S_SELECTION` ioctl can, depending on the hardware (for
|
|
instance if the device doesn't include a scaler), modify the format in
|
|
addition to the selection rectangle. Similarly, the
|
|
:c:func:`VIDIOC_S_INPUT`, :c:func:`VIDIOC_S_OUTPUT`, :c:func:`VIDIOC_S_STD`
|
|
and :c:func:`VIDIOC_S_DV_TIMINGS` ioctls can also modify the format and
|
|
selection rectangles. When those ioctls result in a buffer size or layout
|
|
change, drivers shall handle that condition as they would handle it in the
|
|
:c:func:`VIDIOC_S_FMT` ioctl in all cases described in this section.
|
|
|
|
Controls that only influence the buffer layout can be modified at any time
|
|
when the stream is stopped. As they don't influence the buffer size, no
|
|
special handling is needed to synchronize those controls with buffer
|
|
allocation and the ``V4L2_CTRL_FLAG_GRABBED`` flag is cleared once the
|
|
stream is stopped.
|
|
|
|
Formats and controls that influence the buffer size interact with buffer
|
|
allocation. The simplest way to handle this is for drivers to always require
|
|
buffers to be reallocated in order to change those formats or controls. In
|
|
that case, to perform such changes, userspace applications shall first stop
|
|
the video stream with the :c:func:`VIDIOC_STREAMOFF` ioctl if it is running
|
|
and free all buffers with the :c:func:`VIDIOC_REQBUFS` ioctl if they are
|
|
allocated. After freeing all buffers the ``V4L2_CTRL_FLAG_GRABBED`` flag
|
|
for controls is cleared. The format or controls can then be modified, and
|
|
buffers shall then be reallocated and the stream restarted. A typical ioctl
|
|
sequence is
|
|
|
|
#. VIDIOC_STREAMOFF
|
|
#. VIDIOC_REQBUFS(0)
|
|
#. VIDIOC_S_EXT_CTRLS
|
|
#. VIDIOC_S_FMT
|
|
#. VIDIOC_REQBUFS(n)
|
|
#. VIDIOC_QBUF
|
|
#. VIDIOC_STREAMON
|
|
|
|
The second :c:func:`VIDIOC_REQBUFS` call will take the new format and control
|
|
value into account to compute the buffer size to allocate. Applications can
|
|
also retrieve the size by calling the :c:func:`VIDIOC_G_FMT` ioctl if needed.
|
|
|
|
.. note::
|
|
|
|
The API doesn't mandate the above order for control (3.) and format (4.)
|
|
changes. Format and controls can be set in a different order, or even
|
|
interleaved, depending on the device and use case. For instance some
|
|
controls might behave differently for different pixel formats, in which
|
|
case the format might need to be set first.
|
|
|
|
When reallocation is required, any attempt to modify format or controls that
|
|
influences the buffer size while buffers are allocated shall cause the format
|
|
or control set ioctl to return the ``EBUSY`` error. Any attempt to queue a
|
|
buffer too small for the current format or controls shall cause the
|
|
:c:func:`VIDIOC_QBUF` ioctl to return a ``EINVAL`` error.
|
|
|
|
Buffer reallocation is an expensive operation. To avoid that cost, drivers can
|
|
(and are encouraged to) allow format or controls that influence the buffer
|
|
size to be changed with buffers allocated. In that case, a typical ioctl
|
|
sequence to modify format and controls is
|
|
|
|
#. VIDIOC_STREAMOFF
|
|
#. VIDIOC_S_EXT_CTRLS
|
|
#. VIDIOC_S_FMT
|
|
#. VIDIOC_QBUF
|
|
#. VIDIOC_STREAMON
|
|
|
|
For this sequence to operate correctly, queued buffers need to be large enough
|
|
for the new format or controls. Drivers shall return a ``ENOSPC`` error in
|
|
response to format change (:c:func:`VIDIOC_S_FMT`) or control changes
|
|
(:c:func:`VIDIOC_S_CTRL` or :c:func:`VIDIOC_S_EXT_CTRLS`) if buffers too small
|
|
for the new format are currently queued. As a simplification, drivers are
|
|
allowed to return a ``EBUSY`` error from these ioctls if any buffer is
|
|
currently queued, without checking the queued buffers sizes.
|
|
|
|
Additionally, drivers shall return a ``EINVAL`` error from the
|
|
:c:func:`VIDIOC_QBUF` ioctl if the buffer being queued is too small for the
|
|
current format or controls. Together, these requirements ensure that queued
|
|
buffers will always be large enough for the configured format and controls.
|
|
|
|
Userspace applications can query the buffer size required for a given format
|
|
and controls by first setting the desired control values and then trying the
|
|
desired format. The :c:func:`VIDIOC_TRY_FMT` ioctl will return the required
|
|
buffer size.
|
|
|
|
#. VIDIOC_S_EXT_CTRLS(x)
|
|
#. VIDIOC_TRY_FMT()
|
|
#. VIDIOC_S_EXT_CTRLS(y)
|
|
#. VIDIOC_TRY_FMT()
|
|
|
|
The :c:func:`VIDIOC_CREATE_BUFS` ioctl can then be used to allocate buffers
|
|
based on the queried sizes (for instance by allocating a set of buffers large
|
|
enough for all the desired formats and controls, or by allocating separate set
|
|
of appropriately sized buffers for each use case).
|
|
|
|
.. c:type:: v4l2_buffer
|
|
|
|
struct v4l2_buffer
|
|
==================
|
|
|
|
.. tabularcolumns:: |p{2.9cm}|p{2.4cm}|p{12.0cm}|
|
|
|
|
.. cssclass:: longtable
|
|
|
|
.. flat-table:: struct v4l2_buffer
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 1 2 10
|
|
|
|
* - __u32
|
|
- ``index``
|
|
- Number of the buffer, set by the application except when calling
|
|
:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>`, then it is set by the
|
|
driver. This field can range from zero to the number of buffers
|
|
allocated with the :ref:`VIDIOC_REQBUFS` ioctl
|
|
(struct :c:type:`v4l2_requestbuffers`
|
|
``count``), plus any buffers allocated with
|
|
:ref:`VIDIOC_CREATE_BUFS` minus one.
|
|
* - __u32
|
|
- ``type``
|
|
- Type of the buffer, same as struct
|
|
:c:type:`v4l2_format` ``type`` or struct
|
|
:c:type:`v4l2_requestbuffers` ``type``, set
|
|
by the application. See :c:type:`v4l2_buf_type`
|
|
* - __u32
|
|
- ``bytesused``
|
|
- The number of bytes occupied by the data in the buffer. It depends
|
|
on the negotiated data format and may change with each buffer for
|
|
compressed variable size data like JPEG images. Drivers must set
|
|
this field when ``type`` refers to a capture stream, applications
|
|
when it refers to an output stream. For multiplanar formats this field
|
|
is ignored and the
|
|
``planes`` pointer is used instead.
|
|
* - __u32
|
|
- ``flags``
|
|
- Flags set by the application or driver, see :ref:`buffer-flags`.
|
|
* - __u32
|
|
- ``field``
|
|
- Indicates the field order of the image in the buffer, see
|
|
:c:type:`v4l2_field`. This field is not used when the buffer
|
|
contains VBI data. Drivers must set it when ``type`` refers to a
|
|
capture stream, applications when it refers to an output stream.
|
|
* - struct timeval
|
|
- ``timestamp``
|
|
- For capture streams this is time when the first data byte was
|
|
captured, as returned by the :c:func:`clock_gettime()` function
|
|
for the relevant clock id; see ``V4L2_BUF_FLAG_TIMESTAMP_*`` in
|
|
:ref:`buffer-flags`. For output streams the driver stores the
|
|
time at which the last data byte was actually sent out in the
|
|
``timestamp`` field. This permits applications to monitor the
|
|
drift between the video and system clock. For output streams that
|
|
use ``V4L2_BUF_FLAG_TIMESTAMP_COPY`` the application has to fill
|
|
in the timestamp which will be copied by the driver to the capture
|
|
stream.
|
|
* - struct :c:type:`v4l2_timecode`
|
|
- ``timecode``
|
|
- When the ``V4L2_BUF_FLAG_TIMECODE`` flag is set in ``flags``, this
|
|
structure contains a frame timecode. In
|
|
:c:type:`V4L2_FIELD_ALTERNATE <v4l2_field>` mode the top and
|
|
bottom field contain the same timecode. Timecodes are intended to
|
|
help video editing and are typically recorded on video tapes, but
|
|
also embedded in compressed formats like MPEG. This field is
|
|
independent of the ``timestamp`` and ``sequence`` fields.
|
|
* - __u32
|
|
- ``sequence``
|
|
- Set by the driver, counting the frames (not fields!) in sequence.
|
|
This field is set for both input and output devices.
|
|
* - :cspan:`2`
|
|
|
|
In :c:type:`V4L2_FIELD_ALTERNATE <v4l2_field>` mode the top and
|
|
bottom field have the same sequence number. The count starts at
|
|
zero and includes dropped or repeated frames. A dropped frame was
|
|
received by an input device but could not be stored due to lack of
|
|
free buffer space. A repeated frame was displayed again by an
|
|
output device because the application did not pass new data in
|
|
time.
|
|
|
|
.. note::
|
|
|
|
This may count the frames received e.g. over USB, without
|
|
taking into account the frames dropped by the remote hardware due
|
|
to limited compression throughput or bus bandwidth. These devices
|
|
identify by not enumerating any video standards, see
|
|
:ref:`standard`.
|
|
|
|
* - __u32
|
|
- ``memory``
|
|
- This field must be set by applications and/or drivers in
|
|
accordance with the selected I/O method. See :c:type:`v4l2_memory`
|
|
* - union {
|
|
- ``m``
|
|
* - __u32
|
|
- ``offset``
|
|
- For the single-planar API and when ``memory`` is
|
|
``V4L2_MEMORY_MMAP`` this is the offset of the buffer from the
|
|
start of the device memory. The value is returned by the driver
|
|
and apart of serving as parameter to the
|
|
:c:func:`mmap()` function not useful for applications.
|
|
See :ref:`mmap` for details
|
|
* - unsigned long
|
|
- ``userptr``
|
|
- For the single-planar API and when ``memory`` is
|
|
``V4L2_MEMORY_USERPTR`` this is a pointer to the buffer (casted to
|
|
unsigned long type) in virtual memory, set by the application. See
|
|
:ref:`userp` for details.
|
|
* - struct v4l2_plane
|
|
- ``*planes``
|
|
- When using the multi-planar API, contains a userspace pointer to
|
|
an array of struct :c:type:`v4l2_plane`. The size of
|
|
the array should be put in the ``length`` field of this
|
|
struct :c:type:`v4l2_buffer` structure.
|
|
* - int
|
|
- ``fd``
|
|
- For the single-plane API and when ``memory`` is
|
|
``V4L2_MEMORY_DMABUF`` this is the file descriptor associated with
|
|
a DMABUF buffer.
|
|
* - }
|
|
-
|
|
* - __u32
|
|
- ``length``
|
|
- Size of the buffer (not the payload) in bytes for the
|
|
single-planar API. This is set by the driver based on the calls to
|
|
:ref:`VIDIOC_REQBUFS` and/or
|
|
:ref:`VIDIOC_CREATE_BUFS`. For the
|
|
multi-planar API the application sets this to the number of
|
|
elements in the ``planes`` array. The driver will fill in the
|
|
actual number of valid elements in that array.
|
|
* - __u32
|
|
- ``reserved2``
|
|
- A place holder for future extensions. Drivers and applications
|
|
must set this to 0.
|
|
* - __u32
|
|
- ``request_fd``
|
|
- The file descriptor of the request to queue the buffer to. If the flag
|
|
``V4L2_BUF_FLAG_REQUEST_FD`` is set, then the buffer will be
|
|
queued to this request. If the flag is not set, then this field will
|
|
be ignored.
|
|
|
|
The ``V4L2_BUF_FLAG_REQUEST_FD`` flag and this field are only used by
|
|
:ref:`ioctl VIDIOC_QBUF <VIDIOC_QBUF>` and ignored by other ioctls that
|
|
take a :c:type:`v4l2_buffer` as argument.
|
|
|
|
Applications should not set ``V4L2_BUF_FLAG_REQUEST_FD`` for any ioctls
|
|
other than :ref:`VIDIOC_QBUF <VIDIOC_QBUF>`.
|
|
|
|
If the device does not support requests, then ``EBADR`` will be returned.
|
|
If requests are supported but an invalid request file descriptor is
|
|
given, then ``EINVAL`` will be returned.
|
|
|
|
|
|
.. c:type:: v4l2_plane
|
|
|
|
struct v4l2_plane
|
|
=================
|
|
|
|
.. tabularcolumns:: |p{3.5cm}|p{3.5cm}|p{10.3cm}|
|
|
|
|
.. cssclass:: longtable
|
|
|
|
.. flat-table::
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 1 1 2
|
|
|
|
* - __u32
|
|
- ``bytesused``
|
|
- The number of bytes occupied by data in the plane (its payload).
|
|
Drivers must set this field when ``type`` refers to a capture
|
|
stream, applications when it refers to an output stream.
|
|
|
|
.. note::
|
|
|
|
Note that the actual image data starts at ``data_offset``
|
|
which may not be 0.
|
|
* - __u32
|
|
- ``length``
|
|
- Size in bytes of the plane (not its payload). This is set by the
|
|
driver based on the calls to
|
|
:ref:`VIDIOC_REQBUFS` and/or
|
|
:ref:`VIDIOC_CREATE_BUFS`.
|
|
* - union {
|
|
- ``m``
|
|
* - __u32
|
|
- ``mem_offset``
|
|
- When the memory type in the containing struct
|
|
:c:type:`v4l2_buffer` is ``V4L2_MEMORY_MMAP``, this
|
|
is the value that should be passed to :c:func:`mmap()`,
|
|
similar to the ``offset`` field in struct
|
|
:c:type:`v4l2_buffer`.
|
|
* - unsigned long
|
|
- ``userptr``
|
|
- When the memory type in the containing struct
|
|
:c:type:`v4l2_buffer` is ``V4L2_MEMORY_USERPTR``,
|
|
this is a userspace pointer to the memory allocated for this plane
|
|
by an application.
|
|
* - int
|
|
- ``fd``
|
|
- When the memory type in the containing struct
|
|
:c:type:`v4l2_buffer` is ``V4L2_MEMORY_DMABUF``,
|
|
this is a file descriptor associated with a DMABUF buffer, similar
|
|
to the ``fd`` field in struct :c:type:`v4l2_buffer`.
|
|
* - }
|
|
-
|
|
* - __u32
|
|
- ``data_offset``
|
|
- Offset in bytes to video data in the plane. Drivers must set this
|
|
field when ``type`` refers to a capture stream, applications when
|
|
it refers to an output stream.
|
|
|
|
.. note::
|
|
|
|
That data_offset is included in ``bytesused``. So the
|
|
size of the image in the plane is ``bytesused``-``data_offset``
|
|
at offset ``data_offset`` from the start of the plane.
|
|
* - __u32
|
|
- ``reserved[11]``
|
|
- Reserved for future use. Should be zeroed by drivers and
|
|
applications.
|
|
|
|
|
|
.. c:type:: v4l2_buf_type
|
|
|
|
enum v4l2_buf_type
|
|
==================
|
|
|
|
.. cssclass:: longtable
|
|
|
|
.. tabularcolumns:: |p{7.8cm}|p{0.6cm}|p{8.9cm}|
|
|
|
|
.. flat-table::
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 4 1 9
|
|
|
|
* - ``V4L2_BUF_TYPE_VIDEO_CAPTURE``
|
|
- 1
|
|
- Buffer of a single-planar video capture stream, see
|
|
:ref:`capture`.
|
|
* - ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``
|
|
- 9
|
|
- Buffer of a multi-planar video capture stream, see
|
|
:ref:`capture`.
|
|
* - ``V4L2_BUF_TYPE_VIDEO_OUTPUT``
|
|
- 2
|
|
- Buffer of a single-planar video output stream, see
|
|
:ref:`output`.
|
|
* - ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``
|
|
- 10
|
|
- Buffer of a multi-planar video output stream, see :ref:`output`.
|
|
* - ``V4L2_BUF_TYPE_VIDEO_OVERLAY``
|
|
- 3
|
|
- Buffer for video overlay, see :ref:`overlay`.
|
|
* - ``V4L2_BUF_TYPE_VBI_CAPTURE``
|
|
- 4
|
|
- Buffer of a raw VBI capture stream, see :ref:`raw-vbi`.
|
|
* - ``V4L2_BUF_TYPE_VBI_OUTPUT``
|
|
- 5
|
|
- Buffer of a raw VBI output stream, see :ref:`raw-vbi`.
|
|
* - ``V4L2_BUF_TYPE_SLICED_VBI_CAPTURE``
|
|
- 6
|
|
- Buffer of a sliced VBI capture stream, see :ref:`sliced`.
|
|
* - ``V4L2_BUF_TYPE_SLICED_VBI_OUTPUT``
|
|
- 7
|
|
- Buffer of a sliced VBI output stream, see :ref:`sliced`.
|
|
* - ``V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY``
|
|
- 8
|
|
- Buffer for video output overlay (OSD), see :ref:`osd`.
|
|
* - ``V4L2_BUF_TYPE_SDR_CAPTURE``
|
|
- 11
|
|
- Buffer for Software Defined Radio (SDR) capture stream, see
|
|
:ref:`sdr`.
|
|
* - ``V4L2_BUF_TYPE_SDR_OUTPUT``
|
|
- 12
|
|
- Buffer for Software Defined Radio (SDR) output stream, see
|
|
:ref:`sdr`.
|
|
* - ``V4L2_BUF_TYPE_META_CAPTURE``
|
|
- 13
|
|
- Buffer for metadata capture, see :ref:`metadata`.
|
|
* - ``V4L2_BUF_TYPE_META_OUTPUT``
|
|
- 14
|
|
- Buffer for metadata output, see :ref:`metadata`.
|
|
|
|
|
|
.. _buffer-flags:
|
|
|
|
Buffer Flags
|
|
============
|
|
|
|
.. raw:: latex
|
|
|
|
\footnotesize
|
|
|
|
.. tabularcolumns:: |p{6.5cm}|p{1.8cm}|p{9.0cm}|
|
|
|
|
.. cssclass:: longtable
|
|
|
|
.. flat-table::
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 65 18 70
|
|
|
|
* .. _`V4L2-BUF-FLAG-MAPPED`:
|
|
|
|
- ``V4L2_BUF_FLAG_MAPPED``
|
|
- 0x00000001
|
|
- The buffer resides in device memory and has been mapped into the
|
|
application's address space, see :ref:`mmap` for details.
|
|
Drivers set or clear this flag when the
|
|
:ref:`VIDIOC_QUERYBUF`,
|
|
:ref:`VIDIOC_QBUF` or
|
|
:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl is called. Set by the
|
|
driver.
|
|
* .. _`V4L2-BUF-FLAG-QUEUED`:
|
|
|
|
- ``V4L2_BUF_FLAG_QUEUED``
|
|
- 0x00000002
|
|
- Internally drivers maintain two buffer queues, an incoming and
|
|
outgoing queue. When this flag is set, the buffer is currently on
|
|
the incoming queue. It automatically moves to the outgoing queue
|
|
after the buffer has been filled (capture devices) or displayed
|
|
(output devices). Drivers set or clear this flag when the
|
|
``VIDIOC_QUERYBUF`` ioctl is called. After (successful) calling
|
|
the ``VIDIOC_QBUF``\ ioctl it is always set and after
|
|
``VIDIOC_DQBUF`` always cleared.
|
|
* .. _`V4L2-BUF-FLAG-DONE`:
|
|
|
|
- ``V4L2_BUF_FLAG_DONE``
|
|
- 0x00000004
|
|
- When this flag is set, the buffer is currently on the outgoing
|
|
queue, ready to be dequeued from the driver. Drivers set or clear
|
|
this flag when the ``VIDIOC_QUERYBUF`` ioctl is called. After
|
|
calling the ``VIDIOC_QBUF`` or ``VIDIOC_DQBUF`` it is always
|
|
cleared. Of course a buffer cannot be on both queues at the same
|
|
time, the ``V4L2_BUF_FLAG_QUEUED`` and ``V4L2_BUF_FLAG_DONE`` flag
|
|
are mutually exclusive. They can be both cleared however, then the
|
|
buffer is in "dequeued" state, in the application domain so to
|
|
say.
|
|
* .. _`V4L2-BUF-FLAG-ERROR`:
|
|
|
|
- ``V4L2_BUF_FLAG_ERROR``
|
|
- 0x00000040
|
|
- When this flag is set, the buffer has been dequeued successfully,
|
|
although the data might have been corrupted. This is recoverable,
|
|
streaming may continue as normal and the buffer may be reused
|
|
normally. Drivers set this flag when the ``VIDIOC_DQBUF`` ioctl is
|
|
called.
|
|
* .. _`V4L2-BUF-FLAG-IN-REQUEST`:
|
|
|
|
- ``V4L2_BUF_FLAG_IN_REQUEST``
|
|
- 0x00000080
|
|
- This buffer is part of a request that hasn't been queued yet.
|
|
* .. _`V4L2-BUF-FLAG-KEYFRAME`:
|
|
|
|
- ``V4L2_BUF_FLAG_KEYFRAME``
|
|
- 0x00000008
|
|
- Drivers set or clear this flag when calling the ``VIDIOC_DQBUF``
|
|
ioctl. It may be set by video capture devices when the buffer
|
|
contains a compressed image which is a key frame (or field), i. e.
|
|
can be decompressed on its own. Also known as an I-frame.
|
|
Applications can set this bit when ``type`` refers to an output
|
|
stream.
|
|
* .. _`V4L2-BUF-FLAG-PFRAME`:
|
|
|
|
- ``V4L2_BUF_FLAG_PFRAME``
|
|
- 0x00000010
|
|
- Similar to ``V4L2_BUF_FLAG_KEYFRAME`` this flags predicted frames
|
|
or fields which contain only differences to a previous key frame.
|
|
Applications can set this bit when ``type`` refers to an output
|
|
stream.
|
|
* .. _`V4L2-BUF-FLAG-BFRAME`:
|
|
|
|
- ``V4L2_BUF_FLAG_BFRAME``
|
|
- 0x00000020
|
|
- Similar to ``V4L2_BUF_FLAG_KEYFRAME`` this flags a bi-directional
|
|
predicted frame or field which contains only the differences
|
|
between the current frame and both the preceding and following key
|
|
frames to specify its content. Applications can set this bit when
|
|
``type`` refers to an output stream.
|
|
* .. _`V4L2-BUF-FLAG-TIMECODE`:
|
|
|
|
- ``V4L2_BUF_FLAG_TIMECODE``
|
|
- 0x00000100
|
|
- The ``timecode`` field is valid. Drivers set or clear this flag
|
|
when the ``VIDIOC_DQBUF`` ioctl is called. Applications can set
|
|
this bit and the corresponding ``timecode`` structure when
|
|
``type`` refers to an output stream.
|
|
* .. _`V4L2-BUF-FLAG-PREPARED`:
|
|
|
|
- ``V4L2_BUF_FLAG_PREPARED``
|
|
- 0x00000400
|
|
- The buffer has been prepared for I/O and can be queued by the
|
|
application. Drivers set or clear this flag when the
|
|
:ref:`VIDIOC_QUERYBUF`,
|
|
:ref:`VIDIOC_PREPARE_BUF <VIDIOC_QBUF>`,
|
|
:ref:`VIDIOC_QBUF` or
|
|
:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl is called.
|
|
* .. _`V4L2-BUF-FLAG-NO-CACHE-INVALIDATE`:
|
|
|
|
- ``V4L2_BUF_FLAG_NO_CACHE_INVALIDATE``
|
|
- 0x00000800
|
|
- Caches do not have to be invalidated for this buffer. Typically
|
|
applications shall use this flag if the data captured in the
|
|
buffer is not going to be touched by the CPU, instead the buffer
|
|
will, probably, be passed on to a DMA-capable hardware unit for
|
|
further processing or output. This flag is ignored unless the
|
|
queue is used for :ref:`memory mapping <mmap>` streaming I/O and
|
|
reports :ref:`V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS
|
|
<V4L2-BUF-CAP-SUPPORTS-MMAP-CACHE-HINTS>` capability.
|
|
* .. _`V4L2-BUF-FLAG-NO-CACHE-CLEAN`:
|
|
|
|
- ``V4L2_BUF_FLAG_NO_CACHE_CLEAN``
|
|
- 0x00001000
|
|
- Caches do not have to be cleaned for this buffer. Typically
|
|
applications shall use this flag for output buffers if the data in
|
|
this buffer has not been created by the CPU but by some
|
|
DMA-capable unit, in which case caches have not been used. This flag
|
|
is ignored unless the queue is used for :ref:`memory mapping <mmap>`
|
|
streaming I/O and reports :ref:`V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS
|
|
<V4L2-BUF-CAP-SUPPORTS-MMAP-CACHE-HINTS>` capability.
|
|
* .. _`V4L2-BUF-FLAG-M2M-HOLD-CAPTURE-BUF`:
|
|
|
|
- ``V4L2_BUF_FLAG_M2M_HOLD_CAPTURE_BUF``
|
|
- 0x00000200
|
|
- Only valid if struct :c:type:`v4l2_requestbuffers` flag ``V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF`` is
|
|
set. It is typically used with stateless decoders where multiple
|
|
output buffers each decode to a slice of the decoded frame.
|
|
Applications can set this flag when queueing the output buffer
|
|
to prevent the driver from dequeueing the capture buffer after
|
|
the output buffer has been decoded (i.e. the capture buffer is
|
|
'held'). If the timestamp of this output buffer differs from that
|
|
of the previous output buffer, then that indicates the start of a
|
|
new frame and the previously held capture buffer is dequeued.
|
|
* .. _`V4L2-BUF-FLAG-LAST`:
|
|
|
|
- ``V4L2_BUF_FLAG_LAST``
|
|
- 0x00100000
|
|
- Last buffer produced by the hardware. mem2mem codec drivers set
|
|
this flag on the capture queue for the last buffer when the
|
|
:ref:`VIDIOC_QUERYBUF` or
|
|
:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl is called. Due to
|
|
hardware limitations, the last buffer may be empty. In this case
|
|
the driver will set the ``bytesused`` field to 0, regardless of
|
|
the format. Any subsequent call to the
|
|
:ref:`VIDIOC_DQBUF <VIDIOC_QBUF>` ioctl will not block anymore,
|
|
but return an ``EPIPE`` error code.
|
|
* .. _`V4L2-BUF-FLAG-REQUEST-FD`:
|
|
|
|
- ``V4L2_BUF_FLAG_REQUEST_FD``
|
|
- 0x00800000
|
|
- The ``request_fd`` field contains a valid file descriptor.
|
|
* .. _`V4L2-BUF-FLAG-TIMESTAMP-MASK`:
|
|
|
|
- ``V4L2_BUF_FLAG_TIMESTAMP_MASK``
|
|
- 0x0000e000
|
|
- Mask for timestamp types below. To test the timestamp type, mask
|
|
out bits not belonging to timestamp type by performing a logical
|
|
and operation with buffer flags and timestamp mask.
|
|
* .. _`V4L2-BUF-FLAG-TIMESTAMP-UNKNOWN`:
|
|
|
|
- ``V4L2_BUF_FLAG_TIMESTAMP_UNKNOWN``
|
|
- 0x00000000
|
|
- Unknown timestamp type. This type is used by drivers before Linux
|
|
3.9 and may be either monotonic (see below) or realtime (wall
|
|
clock). Monotonic clock has been favoured in embedded systems
|
|
whereas most of the drivers use the realtime clock. Either kinds
|
|
of timestamps are available in user space via
|
|
:c:func:`clock_gettime` using clock IDs ``CLOCK_MONOTONIC``
|
|
and ``CLOCK_REALTIME``, respectively.
|
|
* .. _`V4L2-BUF-FLAG-TIMESTAMP-MONOTONIC`:
|
|
|
|
- ``V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC``
|
|
- 0x00002000
|
|
- The buffer timestamp has been taken from the ``CLOCK_MONOTONIC``
|
|
clock. To access the same clock outside V4L2, use
|
|
:c:func:`clock_gettime`.
|
|
* .. _`V4L2-BUF-FLAG-TIMESTAMP-COPY`:
|
|
|
|
- ``V4L2_BUF_FLAG_TIMESTAMP_COPY``
|
|
- 0x00004000
|
|
- The CAPTURE buffer timestamp has been taken from the corresponding
|
|
OUTPUT buffer. This flag applies only to mem2mem devices.
|
|
* .. _`V4L2-BUF-FLAG-TSTAMP-SRC-MASK`:
|
|
|
|
- ``V4L2_BUF_FLAG_TSTAMP_SRC_MASK``
|
|
- 0x00070000
|
|
- Mask for timestamp sources below. The timestamp source defines the
|
|
point of time the timestamp is taken in relation to the frame.
|
|
Logical 'and' operation between the ``flags`` field and
|
|
``V4L2_BUF_FLAG_TSTAMP_SRC_MASK`` produces the value of the
|
|
timestamp source. Applications must set the timestamp source when
|
|
``type`` refers to an output stream and
|
|
``V4L2_BUF_FLAG_TIMESTAMP_COPY`` is set.
|
|
* .. _`V4L2-BUF-FLAG-TSTAMP-SRC-EOF`:
|
|
|
|
- ``V4L2_BUF_FLAG_TSTAMP_SRC_EOF``
|
|
- 0x00000000
|
|
- End Of Frame. The buffer timestamp has been taken when the last
|
|
pixel of the frame has been received or the last pixel of the
|
|
frame has been transmitted. In practice, software generated
|
|
timestamps will typically be read from the clock a small amount of
|
|
time after the last pixel has been received or transmitten,
|
|
depending on the system and other activity in it.
|
|
* .. _`V4L2-BUF-FLAG-TSTAMP-SRC-SOE`:
|
|
|
|
- ``V4L2_BUF_FLAG_TSTAMP_SRC_SOE``
|
|
- 0x00010000
|
|
- Start Of Exposure. The buffer timestamp has been taken when the
|
|
exposure of the frame has begun. This is only valid for the
|
|
``V4L2_BUF_TYPE_VIDEO_CAPTURE`` buffer type.
|
|
|
|
.. raw:: latex
|
|
|
|
\normalsize
|
|
|
|
enum v4l2_memory
|
|
================
|
|
|
|
.. tabularcolumns:: |p{5.0cm}|p{0.8cm}|p{11.5cm}|
|
|
|
|
.. flat-table::
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 3 1 4
|
|
|
|
* - ``V4L2_MEMORY_MMAP``
|
|
- 1
|
|
- The buffer is used for :ref:`memory mapping <mmap>` I/O.
|
|
* - ``V4L2_MEMORY_USERPTR``
|
|
- 2
|
|
- The buffer is used for :ref:`user pointer <userp>` I/O.
|
|
* - ``V4L2_MEMORY_OVERLAY``
|
|
- 3
|
|
- [to do]
|
|
* - ``V4L2_MEMORY_DMABUF``
|
|
- 4
|
|
- The buffer is used for :ref:`DMA shared buffer <dmabuf>` I/O.
|
|
|
|
.. _memory-flags:
|
|
|
|
Memory Consistency Flags
|
|
------------------------
|
|
|
|
.. raw:: latex
|
|
|
|
\small
|
|
|
|
.. tabularcolumns:: |p{7.0cm}|p{2.1cm}|p{8.4cm}|
|
|
|
|
.. cssclass:: longtable
|
|
|
|
.. flat-table::
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 3 1 4
|
|
|
|
* .. _`V4L2-MEMORY-FLAG-NON-COHERENT`:
|
|
|
|
- ``V4L2_MEMORY_FLAG_NON_COHERENT``
|
|
- 0x00000001
|
|
- A buffer is allocated either in coherent (it will be automatically
|
|
coherent between the CPU and the bus) or non-coherent memory. The
|
|
latter can provide performance gains, for instance the CPU cache
|
|
sync/flush operations can be avoided if the buffer is accessed by the
|
|
corresponding device only and the CPU does not read/write to/from that
|
|
buffer. However, this requires extra care from the driver -- it must
|
|
guarantee memory consistency by issuing a cache flush/sync when
|
|
consistency is needed. If this flag is set V4L2 will attempt to
|
|
allocate the buffer in non-coherent memory. The flag takes effect
|
|
only if the buffer is used for :ref:`memory mapping <mmap>` I/O and the
|
|
queue reports the :ref:`V4L2_BUF_CAP_SUPPORTS_MMAP_CACHE_HINTS
|
|
<V4L2-BUF-CAP-SUPPORTS-MMAP-CACHE-HINTS>` capability.
|
|
|
|
.. raw:: latex
|
|
|
|
\normalsize
|
|
|
|
Timecodes
|
|
=========
|
|
|
|
The :c:type:`v4l2_buffer_timecode` structure is designed to hold a
|
|
:ref:`smpte12m` or similar timecode.
|
|
(struct :c:type:`timeval` timestamps are stored in the struct
|
|
:c:type:`v4l2_buffer` ``timestamp`` field.)
|
|
|
|
.. c:type:: v4l2_timecode
|
|
|
|
struct v4l2_timecode
|
|
--------------------
|
|
|
|
.. tabularcolumns:: |p{1.4cm}|p{2.8cm}|p{13.1cm}|
|
|
|
|
.. flat-table::
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 1 1 2
|
|
|
|
* - __u32
|
|
- ``type``
|
|
- Frame rate the timecodes are based on, see :ref:`timecode-type`.
|
|
* - __u32
|
|
- ``flags``
|
|
- Timecode flags, see :ref:`timecode-flags`.
|
|
* - __u8
|
|
- ``frames``
|
|
- Frame count, 0 ... 23/24/29/49/59, depending on the type of
|
|
timecode.
|
|
* - __u8
|
|
- ``seconds``
|
|
- Seconds count, 0 ... 59. This is a binary, not BCD number.
|
|
* - __u8
|
|
- ``minutes``
|
|
- Minutes count, 0 ... 59. This is a binary, not BCD number.
|
|
* - __u8
|
|
- ``hours``
|
|
- Hours count, 0 ... 29. This is a binary, not BCD number.
|
|
* - __u8
|
|
- ``userbits``\ [4]
|
|
- The "user group" bits from the timecode.
|
|
|
|
|
|
.. _timecode-type:
|
|
|
|
Timecode Types
|
|
--------------
|
|
|
|
.. flat-table::
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 3 1 4
|
|
|
|
* - ``V4L2_TC_TYPE_24FPS``
|
|
- 1
|
|
- 24 frames per second, i. e. film.
|
|
* - ``V4L2_TC_TYPE_25FPS``
|
|
- 2
|
|
- 25 frames per second, i. e. PAL or SECAM video.
|
|
* - ``V4L2_TC_TYPE_30FPS``
|
|
- 3
|
|
- 30 frames per second, i. e. NTSC video.
|
|
* - ``V4L2_TC_TYPE_50FPS``
|
|
- 4
|
|
-
|
|
* - ``V4L2_TC_TYPE_60FPS``
|
|
- 5
|
|
-
|
|
|
|
|
|
.. _timecode-flags:
|
|
|
|
Timecode Flags
|
|
--------------
|
|
|
|
.. tabularcolumns:: |p{6.6cm}|p{1.4cm}|p{9.3cm}|
|
|
|
|
.. flat-table::
|
|
:header-rows: 0
|
|
:stub-columns: 0
|
|
:widths: 3 1 4
|
|
|
|
* - ``V4L2_TC_FLAG_DROPFRAME``
|
|
- 0x0001
|
|
- Indicates "drop frame" semantics for counting frames in 29.97 fps
|
|
material. When set, frame numbers 0 and 1 at the start of each
|
|
minute, except minutes 0, 10, 20, 30, 40, 50 are omitted from the
|
|
count.
|
|
* - ``V4L2_TC_FLAG_COLORFRAME``
|
|
- 0x0002
|
|
- The "color frame" flag.
|
|
* - ``V4L2_TC_USERBITS_field``
|
|
- 0x000C
|
|
- Field mask for the "binary group flags".
|
|
* - ``V4L2_TC_USERBITS_USERDEFINED``
|
|
- 0x0000
|
|
- Unspecified format.
|
|
* - ``V4L2_TC_USERBITS_8BITCHARS``
|
|
- 0x0008
|
|
- 8-bit ISO characters.
|