linux-zen-desktop/arch/arm/mm/proc-arm740.S

148 lines
3.7 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* linux/arch/arm/mm/arm740.S: utility functions for ARM740
*
* Copyright (C) 2004-2006 Hyok S. Choi (hyok.choi@samsung.com)
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/pgtable.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
.text
/*
* cpu_arm740_proc_init()
* cpu_arm740_do_idle()
* cpu_arm740_dcache_clean_area()
* cpu_arm740_switch_mm()
*
* These are not required.
*/
ENTRY(cpu_arm740_proc_init)
ENTRY(cpu_arm740_do_idle)
ENTRY(cpu_arm740_dcache_clean_area)
ENTRY(cpu_arm740_switch_mm)
ret lr
/*
* cpu_arm740_proc_fin()
*/
ENTRY(cpu_arm740_proc_fin)
mrc p15, 0, r0, c1, c0, 0
bic r0, r0, #0x3f000000 @ bank/f/lock/s
bic r0, r0, #0x0000000c @ w-buffer/cache
mcr p15, 0, r0, c1, c0, 0 @ disable caches
ret lr
/*
* cpu_arm740_reset(loc)
* Params : r0 = address to jump to
* Notes : This sets up everything for a reset
*/
.pushsection .idmap.text, "ax"
ENTRY(cpu_arm740_reset)
mov ip, #0
mcr p15, 0, ip, c7, c0, 0 @ invalidate cache
mrc p15, 0, ip, c1, c0, 0 @ get ctrl register
bic ip, ip, #0x0000000c @ ............wc..
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
ret r0
ENDPROC(cpu_arm740_reset)
.popsection
.type __arm740_setup, #function
__arm740_setup:
mov r0, #0
mcr p15, 0, r0, c7, c0, 0 @ invalidate caches
mcr p15, 0, r0, c6, c3 @ disable area 3~7
mcr p15, 0, r0, c6, c4
mcr p15, 0, r0, c6, c5
mcr p15, 0, r0, c6, c6
mcr p15, 0, r0, c6, c7
mov r0, #0x0000003F @ base = 0, size = 4GB
mcr p15, 0, r0, c6, c0 @ set area 0, default
ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
ldr r3, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
mov r4, #10 @ 11 is the minimum (4KB)
1: add r4, r4, #1 @ area size *= 2
movs r3, r3, lsr #1
bne 1b @ count not zero r-shift
orr r0, r0, r4, lsl #1 @ the area register value
orr r0, r0, #1 @ set enable bit
mcr p15, 0, r0, c6, c1 @ set area 1, RAM
ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
ldr r3, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
cmp r3, #0
moveq r0, #0
beq 2f
mov r4, #10 @ 11 is the minimum (4KB)
1: add r4, r4, #1 @ area size *= 2
movs r3, r3, lsr #1
bne 1b @ count not zero r-shift
orr r0, r0, r4, lsl #1 @ the area register value
orr r0, r0, #1 @ set enable bit
2: mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH
mov r0, #0x06
mcr p15, 0, r0, c2, c0 @ Region 1&2 cacheable
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mov r0, #0x00 @ disable whole write buffer
#else
mov r0, #0x02 @ Region 1 write bufferred
#endif
mcr p15, 0, r0, c3, c0
mov r0, #0x10000
sub r0, r0, #1 @ r0 = 0xffff
mcr p15, 0, r0, c5, c0 @ all read/write access
mrc p15, 0, r0, c1, c0 @ get control register
bic r0, r0, #0x3F000000 @ set to standard caching mode
@ need some benchmark
orr r0, r0, #0x0000000d @ MPU/Cache/WB
ret lr
.size __arm740_setup, . - __arm740_setup
__INITDATA
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
define_processor_functions arm740, dabort=v4t_late_abort, pabort=legacy_pabort, nommu=1
.section ".rodata"
string cpu_arch_name, "armv4"
string cpu_elf_name, "v4"
string cpu_arm740_name, "ARM740T"
.align
.section ".proc.info.init", "a"
.type __arm740_proc_info,#object
__arm740_proc_info:
.long 0x41807400
.long 0xfffffff0
.long 0
.long 0
initfn __arm740_setup, __arm740_proc_info
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_26BIT
.long cpu_arm740_name
.long arm740_processor_functions
.long 0
.long 0
.long v4_cache_fns @ cache model
.size __arm740_proc_info, . - __arm740_proc_info