718 lines
15 KiB
Plaintext
718 lines
15 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/gpio-keys.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
|
|
#include "rk3566.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
mmc0 = &sdhci;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial2:1500000n8";
|
|
};
|
|
|
|
adc-keys {
|
|
compatible = "adc-keys";
|
|
io-channels = <&saradc 0>;
|
|
io-channel-names = "buttons";
|
|
keyup-threshold-microvolt = <1750000>;
|
|
|
|
button-recovery {
|
|
label = "recovery";
|
|
linux,code = <KEY_VENDOR>;
|
|
press-threshold-microvolt = <0>;
|
|
};
|
|
};
|
|
|
|
spk_amp: audio-amplifier {
|
|
compatible = "simple-audio-amplifier";
|
|
enable-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-0 = <&spk_amp_enable_h>;
|
|
pinctrl-names = "default";
|
|
sound-name-prefix = "Speaker Amp";
|
|
};
|
|
|
|
dmic_codec: dmic-codec {
|
|
compatible = "dmic-codec";
|
|
num-channels = <6>;
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <&hall_int_l>;
|
|
pinctrl-names = "default";
|
|
|
|
switch-cover {
|
|
label = "cover";
|
|
gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <EV_SW>;
|
|
linux,code = <SW_MACHINE_COVER>;
|
|
linux,can-disable;
|
|
wakeup-event-action = <EV_ACT_DEASSERTED>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&led_pin>;
|
|
pinctrl-names = "default";
|
|
|
|
led-0 {
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
function = LED_FUNCTION_CHARGING;
|
|
gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
clocks = <&rk817 1>;
|
|
clock-names = "ext_clock";
|
|
pinctrl-0 = <&wifi_enable_h>;
|
|
pinctrl-names = "default";
|
|
reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "PineNote";
|
|
simple-audio-card,aux-devs = <&spk_amp>;
|
|
simple-audio-card,widgets = "Headphone", "Headphones",
|
|
"Speaker", "Internal Speakers";
|
|
simple-audio-card,routing = "Headphones", "HPOL",
|
|
"Headphones", "HPOR",
|
|
"Internal Speakers", "Speaker Amp OUTL",
|
|
"Internal Speakers", "Speaker Amp OUTR",
|
|
"Speaker Amp INL", "HPOL",
|
|
"Speaker Amp INR", "HPOR";
|
|
simple-audio-card,pin-switches = "Internal Speakers";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
simple-audio-card,dai-link@0 {
|
|
reg = <0>;
|
|
bitclock-master = <&link0_cpu>;
|
|
format = "i2s";
|
|
frame-master = <&link0_cpu>;
|
|
mclk-fs = <256>;
|
|
|
|
link0_cpu: cpu {
|
|
sound-dai = <&i2s1_8ch>;
|
|
};
|
|
|
|
link0_codec: codec {
|
|
sound-dai = <&rk817>;
|
|
};
|
|
};
|
|
|
|
simple-audio-card,dai-link@1 {
|
|
reg = <1>;
|
|
bitclock-master = <&link1_cpu>;
|
|
format = "pdm";
|
|
frame-master = <&link1_cpu>;
|
|
|
|
link1_cpu: cpu {
|
|
sound-dai = <&pdm>;
|
|
};
|
|
|
|
link1_codec: codec {
|
|
sound-dai = <&dmic_codec>;
|
|
};
|
|
};
|
|
};
|
|
|
|
vbat_4g: vbat-4g {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vbat_4g";
|
|
regulator-min-microvolt = <3800000>;
|
|
regulator-max-microvolt = <3800000>;
|
|
/* powered by vcc_bat, enabled by vbat_4g_en */
|
|
vin-supply = <&vbat_4g_en>;
|
|
};
|
|
|
|
vcc_1v8: vcc-1v8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_1v8";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
/* powered by vcc_sys, enabled by vcc_1v8_en */
|
|
vin-supply = <&vcc_1v8_en>;
|
|
};
|
|
|
|
vcc_bat: vcc-bat {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_bat";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3800000>;
|
|
regulator-max-microvolt = <3800000>;
|
|
};
|
|
|
|
vcc_hall_3v3: vcc-hall-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_hall_3v3";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc_sys>;
|
|
};
|
|
|
|
vcc_sys: vcc-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_sys";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3800000>;
|
|
regulator-max-microvolt = <3800000>;
|
|
vin-supply = <&vcc_bat>;
|
|
};
|
|
|
|
vcc_wl: vcc-wl {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-0 = <&vcc_wl_pin>;
|
|
pinctrl-names = "default";
|
|
regulator-name = "vcc_wl";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&vcc_bat>;
|
|
};
|
|
|
|
vdda_0v9: vdda-0v9 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vdda_0v9";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
/* powered by vcc_sys, enabled by vcc_1v8_en */
|
|
vin-supply = <&vcc_1v8_en>;
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&cpu1 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&cpu2 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&cpu3 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
vdd_cpu: regulator@1c {
|
|
compatible = "tcs,tcs4525";
|
|
reg = <0x1c>;
|
|
fcs,suspend-voltage-selector = <0>;
|
|
regulator-name = "vdd_cpu";
|
|
regulator-min-microvolt = <712500>;
|
|
regulator-max-microvolt = <1390000>;
|
|
regulator-ramp-delay = <2300>;
|
|
regulator-always-on;
|
|
vin-supply = <&vcc_sys>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
rk817: pmic@20 {
|
|
compatible = "rockchip,rk817";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
|
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
|
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
|
clocks = <&cru I2S1_MCLKOUT_TX>;
|
|
clock-names = "mclk";
|
|
#clock-cells = <1>;
|
|
pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>, <&pmic_sleep>;
|
|
pinctrl-names = "default";
|
|
rockchip,system-power-controller;
|
|
#sound-dai-cells = <0>;
|
|
wakeup-source;
|
|
|
|
vcc1-supply = <&vcc_sys>;
|
|
vcc2-supply = <&vcc_sys>;
|
|
vcc3-supply = <&vcc_sys>;
|
|
vcc4-supply = <&vcc_sys>;
|
|
vcc5-supply = <&vcc_sys>;
|
|
vcc6-supply = <&vcc_sys>;
|
|
vcc7-supply = <&vcc_sys>;
|
|
vcc8-supply = <&vcc_sys>;
|
|
vcc9-supply = <&dcdc_boost>;
|
|
|
|
regulators {
|
|
vdd_logic: DCDC_REG1 {
|
|
regulator-name = "vdd_logic";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-initial-mode = <0x2>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
vdd_gpu_npu: DCDC_REG2 {
|
|
regulator-name = "vdd_gpu_npu";
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
regulator-initial-mode = <0x2>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-name = "vcc_ddr";
|
|
regulator-always-on;
|
|
regulator-initial-mode = <0x2>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_3v3: DCDC_REG4 {
|
|
regulator-name = "vcc_3v3";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-initial-mode = <0x2>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca_1v8_pmu: LDO_REG1 {
|
|
regulator-name = "vcca_1v8_pmu";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
/* unused */
|
|
vdda_0v9_ldo: LDO_REG2 {
|
|
regulator-name = "vdda_0v9_ldo";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda_0v9_pmu: LDO_REG3 {
|
|
regulator-name = "vdda_0v9_pmu";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vccio_acodec: LDO_REG4 {
|
|
regulator-name = "vccio_acodec";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
/* unused */
|
|
vccio_sd: LDO_REG5 {
|
|
regulator-name = "vccio_sd";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_3v3_pmu: LDO_REG6 {
|
|
regulator-name = "vcc_3v3_pmu";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8_en: LDO_REG7 {
|
|
regulator-name = "vcc_1v8_en";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vbat_4g_en: LDO_REG8 {
|
|
regulator-name = "vbat_4g_en";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
sleep_sta_ctl: LDO_REG9 {
|
|
regulator-name = "sleep_sta_ctl";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
dcdc_boost: BOOST {
|
|
regulator-name = "boost";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
otg_switch: OTG_SWITCH {
|
|
regulator-name = "otg_switch";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
digitizer@9 {
|
|
compatible = "wacom,w9013", "hid-over-i2c";
|
|
reg = <0x09>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PB6 IRQ_TYPE_LEVEL_LOW>;
|
|
hid-descr-addr = <0x1>;
|
|
pinctrl-0 = <&pen_fwe>, <&pen_irq_l>, <&pen_rst_l>;
|
|
pinctrl-names = "default";
|
|
vdd-supply = <&vcc_3v3_pmu>;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
pinctrl-0 = <&i2c3m1_xfer>;
|
|
status = "okay";
|
|
|
|
led-controller@36 {
|
|
compatible = "ti,lm3630a";
|
|
reg = <0x36>;
|
|
enable-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-0 = <&backlight_hwen_h>;
|
|
pinctrl-names = "default";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@0 {
|
|
reg = <0>;
|
|
label = "backlight_cool";
|
|
default-brightness = <0>;
|
|
};
|
|
|
|
led@1 {
|
|
reg = <1>;
|
|
label = "backlight_warm";
|
|
default-brightness = <0>;
|
|
};
|
|
};
|
|
|
|
wusb3801: tcpc@60 {
|
|
compatible = "willsemi,wusb3801";
|
|
reg = <0x60>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-0 = <&tcpc_int_l>;
|
|
pinctrl-names = "default";
|
|
|
|
connector {
|
|
compatible = "usb-c-connector";
|
|
label = "USB-C";
|
|
vbus-supply = <&otg_switch>;
|
|
power-role = "dual";
|
|
try-power-role = "sink";
|
|
data-role = "dual";
|
|
typec-power-opmode = "default";
|
|
pd-disable;
|
|
|
|
ports {
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x0>;
|
|
|
|
port@0 {
|
|
reg = <0x0>;
|
|
|
|
typec_hs_usb2phy0: endpoint {
|
|
remote-endpoint = <&usb2phy0_typec_hs>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c5 {
|
|
status = "okay";
|
|
|
|
accelerometer@18 {
|
|
compatible = "silan,sc7a20";
|
|
reg = <0x18>;
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-0 = <&accelerometer_int_l>;
|
|
pinctrl-names = "default";
|
|
st,drdy-int-pin = <1>;
|
|
vdd-supply = <&vcc_3v3>;
|
|
vddio-supply = <&vcc_3v3>;
|
|
};
|
|
};
|
|
|
|
&i2s1_8ch {
|
|
pinctrl-0 = <&i2s1m0_lrcktx>, <&i2s1m0_sclktx>, <&i2s1m0_sdi0>, <&i2s1m0_sdo0>;
|
|
rockchip,trcm-sync-tx-only;
|
|
status = "okay";
|
|
};
|
|
|
|
&pdm {
|
|
pinctrl-0 = <&pdmm0_clk1>, <&pdmm0_sdi1>, <&pdmm0_sdi2>;
|
|
/* microphones are on channels 1 and 2 */
|
|
rockchip,path-map = <1>, <2>, <0>, <3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
accelerometer {
|
|
accelerometer_int_l: accelerometer-int-l {
|
|
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
audio-amplifier {
|
|
spk_amp_enable_h: spk-amp-enable-h {
|
|
rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
backlight {
|
|
backlight_hwen_h: backlight-hwen-h {
|
|
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
bt {
|
|
bt_enable_h: bt-enable-h {
|
|
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
bt_host_wake_l: bt-host-wake-l {
|
|
rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
|
|
bt_wake_h: bt-wake-h {
|
|
rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
led {
|
|
led_pin: led-pin {
|
|
rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
hall {
|
|
hall_int_l: hall-int-l {
|
|
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pen {
|
|
pen_fwe: pen-fwe {
|
|
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
};
|
|
|
|
pen_irq_l: pen-irq-l {
|
|
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
pen_rst_l: pen-rst-l {
|
|
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pmic {
|
|
pmic_int_l: pmic-int-l {
|
|
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
pmic_sleep: pmic-sleep {
|
|
rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
sdio-pwrseq {
|
|
wifi_enable_h: wifi-enable-h {
|
|
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
tcpc {
|
|
tcpc_int_l: tcpc-int-l {
|
|
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
vcc-wl {
|
|
vcc_wl_pin: vcc-wl-pin {
|
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
wifi {
|
|
wifi_host_wake_l: wifi-host-wake-l {
|
|
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmu_io_domains {
|
|
pmuio1-supply = <&vcc_3v3_pmu>;
|
|
pmuio2-supply = <&vcc_3v3_pmu>;
|
|
vccio1-supply = <&vccio_acodec>;
|
|
vccio2-supply = <&vcc_1v8>;
|
|
vccio3-supply = <&vcc_3v3>;
|
|
vccio4-supply = <&vcca_1v8_pmu>;
|
|
vccio5-supply = <&vcc_3v3>;
|
|
vccio6-supply = <&vcc_3v3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&vcc_1v8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
mmc-hs200-1_8v;
|
|
non-removable;
|
|
pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>;
|
|
pinctrl-names = "default";
|
|
vmmc-supply = <&vcc_3v3>;
|
|
vqmmc-supply = <&vcc_1v8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc1 {
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-sdio-irq;
|
|
keep-power-in-suspend;
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
non-removable;
|
|
pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_clk>, <&sdmmc1_cmd>;
|
|
pinctrl-names = "default";
|
|
sd-uhs-sdr104;
|
|
vmmc-supply = <&vcc_wl>;
|
|
vqmmc-supply = <&vcca_1v8_pmu>;
|
|
status = "okay";
|
|
};
|
|
|
|
&tsadc {
|
|
/* tshut mode 0:CRU 1:GPIO */
|
|
rockchip,hw-tshut-mode = <1>;
|
|
/* tshut polarity 0:LOW 1:HIGH */
|
|
rockchip,hw-tshut-polarity = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-0 = <&uart1m0_ctsn>, <&uart1m0_rtsn>, <&uart1m0_xfer>;
|
|
pinctrl-names = "default";
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "brcm,bcm43438-bt";
|
|
clocks = <&rk817 1>;
|
|
clock-names = "lpo";
|
|
device-wake-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
|
|
host-wake-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
|
|
pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>;
|
|
pinctrl-names = "default";
|
|
vbat-supply = <&vcc_wl>;
|
|
vddio-supply = <&vcca_1v8_pmu>;
|
|
};
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_xhci {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy0_otg {
|
|
status = "okay";
|
|
|
|
port {
|
|
usb2phy0_typec_hs: endpoint {
|
|
remote-endpoint = <&typec_hs_usb2phy0>;
|
|
};
|
|
};
|
|
};
|