linux-zen-desktop/drivers/clk/meson/g12a-aoclk.c

477 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Amlogic Meson-AXG Clock Controller Driver
*
* Copyright (c) 2016 Baylibre SAS.
* Author: Michael Turquette <mturquette@baylibre.com>
*
* Copyright (c) 2019 Baylibre SAS.
* Author: Neil Armstrong <narmstrong@baylibre.com>
*/
#include <linux/clk-provider.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include "meson-aoclk.h"
#include "g12a-aoclk.h"
#include "clk-regmap.h"
#include "clk-dualdiv.h"
/*
* AO Configuration Clock registers offsets
* Register offsets from the data sheet must be multiplied by 4.
*/
#define AO_RTI_STATUS_REG3 0x0C
#define AO_RTI_PWR_CNTL_REG0 0x10
#define AO_RTI_GEN_CNTL_REG0 0x40
#define AO_CLK_GATE0 0x4c
#define AO_CLK_GATE0_SP 0x50
#define AO_OSCIN_CNTL 0x58
#define AO_CEC_CLK_CNTL_REG0 0x74
#define AO_CEC_CLK_CNTL_REG1 0x78
#define AO_SAR_CLK 0x90
#define AO_RTC_ALT_CLK_CNTL0 0x94
#define AO_RTC_ALT_CLK_CNTL1 0x98
/*
* Like every other peripheral clock gate in Amlogic Clock drivers,
* we are using CLK_IGNORE_UNUSED here, so we keep the state of the
* bootloader. The goal is to remove this flag at some point.
* Actually removing it will require some extensive test to be done safely.
*/
#define AXG_AO_GATE(_name, _reg, _bit) \
static struct clk_regmap g12a_aoclk_##_name = { \
.data = &(struct clk_regmap_gate_data) { \
.offset = (_reg), \
.bit_idx = (_bit), \
}, \
.hw.init = &(struct clk_init_data) { \
.name = "g12a_ao_" #_name, \
.ops = &clk_regmap_gate_ops, \
.parent_data = &(const struct clk_parent_data) { \
.fw_name = "mpeg-clk", \
}, \
.num_parents = 1, \
.flags = CLK_IGNORE_UNUSED, \
}, \
}
AXG_AO_GATE(ahb, AO_CLK_GATE0, 0);
AXG_AO_GATE(ir_in, AO_CLK_GATE0, 1);
AXG_AO_GATE(i2c_m0, AO_CLK_GATE0, 2);
AXG_AO_GATE(i2c_s0, AO_CLK_GATE0, 3);
AXG_AO_GATE(uart, AO_CLK_GATE0, 4);
AXG_AO_GATE(prod_i2c, AO_CLK_GATE0, 5);
AXG_AO_GATE(uart2, AO_CLK_GATE0, 6);
AXG_AO_GATE(ir_out, AO_CLK_GATE0, 7);
AXG_AO_GATE(saradc, AO_CLK_GATE0, 8);
AXG_AO_GATE(mailbox, AO_CLK_GATE0_SP, 0);
AXG_AO_GATE(m3, AO_CLK_GATE0_SP, 1);
AXG_AO_GATE(ahb_sram, AO_CLK_GATE0_SP, 2);
AXG_AO_GATE(rti, AO_CLK_GATE0_SP, 3);
AXG_AO_GATE(m4_fclk, AO_CLK_GATE0_SP, 4);
AXG_AO_GATE(m4_hclk, AO_CLK_GATE0_SP, 5);
static struct clk_regmap g12a_aoclk_cts_oscin = {
.data = &(struct clk_regmap_gate_data){
.offset = AO_RTI_PWR_CNTL_REG0,
.bit_idx = 14,
},
.hw.init = &(struct clk_init_data){
.name = "cts_oscin",
.ops = &clk_regmap_gate_ro_ops,
.parent_data = &(const struct clk_parent_data) {
.fw_name = "xtal",
},
.num_parents = 1,
},
};
static const struct meson_clk_dualdiv_param g12a_32k_div_table[] = {
{
.dual = 1,
.n1 = 733,
.m1 = 8,
.n2 = 732,
.m2 = 11,
}, {}
};
/* 32k_by_oscin clock */
static struct clk_regmap g12a_aoclk_32k_by_oscin_pre = {
.data = &(struct clk_regmap_gate_data){
.offset = AO_RTC_ALT_CLK_CNTL0,
.bit_idx = 31,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_32k_by_oscin_pre",
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) {
&g12a_aoclk_cts_oscin.hw
},
.num_parents = 1,
},
};
static struct clk_regmap g12a_aoclk_32k_by_oscin_div = {
.data = &(struct meson_clk_dualdiv_data){
.n1 = {
.reg_off = AO_RTC_ALT_CLK_CNTL0,
.shift = 0,
.width = 12,
},
.n2 = {
.reg_off = AO_RTC_ALT_CLK_CNTL0,
.shift = 12,
.width = 12,
},
.m1 = {
.reg_off = AO_RTC_ALT_CLK_CNTL1,
.shift = 0,
.width = 12,
},
.m2 = {
.reg_off = AO_RTC_ALT_CLK_CNTL1,
.shift = 12,
.width = 12,
},
.dual = {
.reg_off = AO_RTC_ALT_CLK_CNTL0,
.shift = 28,
.width = 1,
},
.table = g12a_32k_div_table,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_32k_by_oscin_div",
.ops = &meson_clk_dualdiv_ops,
.parent_hws = (const struct clk_hw *[]) {
&g12a_aoclk_32k_by_oscin_pre.hw
},
.num_parents = 1,
},
};
static struct clk_regmap g12a_aoclk_32k_by_oscin_sel = {
.data = &(struct clk_regmap_mux_data) {
.offset = AO_RTC_ALT_CLK_CNTL1,
.mask = 0x1,
.shift = 24,
.flags = CLK_MUX_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_32k_by_oscin_sel",
.ops = &clk_regmap_mux_ops,
.parent_hws = (const struct clk_hw *[]) {
&g12a_aoclk_32k_by_oscin_div.hw,
&g12a_aoclk_32k_by_oscin_pre.hw,
},
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap g12a_aoclk_32k_by_oscin = {
.data = &(struct clk_regmap_gate_data){
.offset = AO_RTC_ALT_CLK_CNTL0,
.bit_idx = 30,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_32k_by_oscin",
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) {
&g12a_aoclk_32k_by_oscin_sel.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
/* cec clock */
static struct clk_regmap g12a_aoclk_cec_pre = {
.data = &(struct clk_regmap_gate_data){
.offset = AO_CEC_CLK_CNTL_REG0,
.bit_idx = 31,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_cec_pre",
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) {
&g12a_aoclk_cts_oscin.hw
},
.num_parents = 1,
},
};
static struct clk_regmap g12a_aoclk_cec_div = {
.data = &(struct meson_clk_dualdiv_data){
.n1 = {
.reg_off = AO_CEC_CLK_CNTL_REG0,
.shift = 0,
.width = 12,
},
.n2 = {
.reg_off = AO_CEC_CLK_CNTL_REG0,
.shift = 12,
.width = 12,
},
.m1 = {
.reg_off = AO_CEC_CLK_CNTL_REG1,
.shift = 0,
.width = 12,
},
.m2 = {
.reg_off = AO_CEC_CLK_CNTL_REG1,
.shift = 12,
.width = 12,
},
.dual = {
.reg_off = AO_CEC_CLK_CNTL_REG0,
.shift = 28,
.width = 1,
},
.table = g12a_32k_div_table,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_cec_div",
.ops = &meson_clk_dualdiv_ops,
.parent_hws = (const struct clk_hw *[]) {
&g12a_aoclk_cec_pre.hw
},
.num_parents = 1,
},
};
static struct clk_regmap g12a_aoclk_cec_sel = {
.data = &(struct clk_regmap_mux_data) {
.offset = AO_CEC_CLK_CNTL_REG1,
.mask = 0x1,
.shift = 24,
.flags = CLK_MUX_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_cec_sel",
.ops = &clk_regmap_mux_ops,
.parent_hws = (const struct clk_hw *[]) {
&g12a_aoclk_cec_div.hw,
&g12a_aoclk_cec_pre.hw,
},
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap g12a_aoclk_cec = {
.data = &(struct clk_regmap_gate_data){
.offset = AO_CEC_CLK_CNTL_REG0,
.bit_idx = 30,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_cec",
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) {
&g12a_aoclk_cec_sel.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap g12a_aoclk_cts_rtc_oscin = {
.data = &(struct clk_regmap_mux_data) {
.offset = AO_RTI_PWR_CNTL_REG0,
.mask = 0x1,
.shift = 10,
.flags = CLK_MUX_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_cts_rtc_oscin",
.ops = &clk_regmap_mux_ops,
.parent_data = (const struct clk_parent_data []) {
{ .hw = &g12a_aoclk_32k_by_oscin.hw },
{ .fw_name = "ext-32k-0", },
},
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap g12a_aoclk_clk81 = {
.data = &(struct clk_regmap_mux_data) {
.offset = AO_RTI_PWR_CNTL_REG0,
.mask = 0x1,
.shift = 8,
.flags = CLK_MUX_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_clk81",
.ops = &clk_regmap_mux_ro_ops,
.parent_data = (const struct clk_parent_data []) {
{ .fw_name = "mpeg-clk", },
{ .hw = &g12a_aoclk_cts_rtc_oscin.hw },
},
.num_parents = 2,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap g12a_aoclk_saradc_mux = {
.data = &(struct clk_regmap_mux_data) {
.offset = AO_SAR_CLK,
.mask = 0x3,
.shift = 9,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_saradc_mux",
.ops = &clk_regmap_mux_ops,
.parent_data = (const struct clk_parent_data []) {
{ .fw_name = "xtal", },
{ .hw = &g12a_aoclk_clk81.hw },
},
.num_parents = 2,
},
};
static struct clk_regmap g12a_aoclk_saradc_div = {
.data = &(struct clk_regmap_div_data) {
.offset = AO_SAR_CLK,
.shift = 0,
.width = 8,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_saradc_div",
.ops = &clk_regmap_divider_ops,
.parent_hws = (const struct clk_hw *[]) {
&g12a_aoclk_saradc_mux.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap g12a_aoclk_saradc_gate = {
.data = &(struct clk_regmap_gate_data) {
.offset = AO_SAR_CLK,
.bit_idx = 8,
},
.hw.init = &(struct clk_init_data){
.name = "g12a_ao_saradc_gate",
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) {
&g12a_aoclk_saradc_div.hw
},
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static const unsigned int g12a_aoclk_reset[] = {
[RESET_AO_IR_IN] = 16,
[RESET_AO_UART] = 17,
[RESET_AO_I2C_M] = 18,
[RESET_AO_I2C_S] = 19,
[RESET_AO_SAR_ADC] = 20,
[RESET_AO_UART2] = 22,
[RESET_AO_IR_OUT] = 23,
};
static struct clk_regmap *g12a_aoclk_regmap[] = {
&g12a_aoclk_ahb,
&g12a_aoclk_ir_in,
&g12a_aoclk_i2c_m0,
&g12a_aoclk_i2c_s0,
&g12a_aoclk_uart,
&g12a_aoclk_prod_i2c,
&g12a_aoclk_uart2,
&g12a_aoclk_ir_out,
&g12a_aoclk_saradc,
&g12a_aoclk_mailbox,
&g12a_aoclk_m3,
&g12a_aoclk_ahb_sram,
&g12a_aoclk_rti,
&g12a_aoclk_m4_fclk,
&g12a_aoclk_m4_hclk,
&g12a_aoclk_cts_oscin,
&g12a_aoclk_32k_by_oscin_pre,
&g12a_aoclk_32k_by_oscin_div,
&g12a_aoclk_32k_by_oscin_sel,
&g12a_aoclk_32k_by_oscin,
&g12a_aoclk_cec_pre,
&g12a_aoclk_cec_div,
&g12a_aoclk_cec_sel,
&g12a_aoclk_cec,
&g12a_aoclk_cts_rtc_oscin,
&g12a_aoclk_clk81,
&g12a_aoclk_saradc_mux,
&g12a_aoclk_saradc_div,
&g12a_aoclk_saradc_gate,
};
static const struct clk_hw_onecell_data g12a_aoclk_onecell_data = {
.hws = {
[CLKID_AO_AHB] = &g12a_aoclk_ahb.hw,
[CLKID_AO_IR_IN] = &g12a_aoclk_ir_in.hw,
[CLKID_AO_I2C_M0] = &g12a_aoclk_i2c_m0.hw,
[CLKID_AO_I2C_S0] = &g12a_aoclk_i2c_s0.hw,
[CLKID_AO_UART] = &g12a_aoclk_uart.hw,
[CLKID_AO_PROD_I2C] = &g12a_aoclk_prod_i2c.hw,
[CLKID_AO_UART2] = &g12a_aoclk_uart2.hw,
[CLKID_AO_IR_OUT] = &g12a_aoclk_ir_out.hw,
[CLKID_AO_SAR_ADC] = &g12a_aoclk_saradc.hw,
[CLKID_AO_MAILBOX] = &g12a_aoclk_mailbox.hw,
[CLKID_AO_M3] = &g12a_aoclk_m3.hw,
[CLKID_AO_AHB_SRAM] = &g12a_aoclk_ahb_sram.hw,
[CLKID_AO_RTI] = &g12a_aoclk_rti.hw,
[CLKID_AO_M4_FCLK] = &g12a_aoclk_m4_fclk.hw,
[CLKID_AO_M4_HCLK] = &g12a_aoclk_m4_hclk.hw,
[CLKID_AO_CLK81] = &g12a_aoclk_clk81.hw,
[CLKID_AO_SAR_ADC_SEL] = &g12a_aoclk_saradc_mux.hw,
[CLKID_AO_SAR_ADC_DIV] = &g12a_aoclk_saradc_div.hw,
[CLKID_AO_SAR_ADC_CLK] = &g12a_aoclk_saradc_gate.hw,
[CLKID_AO_CTS_OSCIN] = &g12a_aoclk_cts_oscin.hw,
[CLKID_AO_32K_PRE] = &g12a_aoclk_32k_by_oscin_pre.hw,
[CLKID_AO_32K_DIV] = &g12a_aoclk_32k_by_oscin_div.hw,
[CLKID_AO_32K_SEL] = &g12a_aoclk_32k_by_oscin_sel.hw,
[CLKID_AO_32K] = &g12a_aoclk_32k_by_oscin.hw,
[CLKID_AO_CEC_PRE] = &g12a_aoclk_cec_pre.hw,
[CLKID_AO_CEC_DIV] = &g12a_aoclk_cec_div.hw,
[CLKID_AO_CEC_SEL] = &g12a_aoclk_cec_sel.hw,
[CLKID_AO_CEC] = &g12a_aoclk_cec.hw,
[CLKID_AO_CTS_RTC_OSCIN] = &g12a_aoclk_cts_rtc_oscin.hw,
},
.num = NR_CLKS,
};
static const struct meson_aoclk_data g12a_aoclkc_data = {
.reset_reg = AO_RTI_GEN_CNTL_REG0,
.num_reset = ARRAY_SIZE(g12a_aoclk_reset),
.reset = g12a_aoclk_reset,
.num_clks = ARRAY_SIZE(g12a_aoclk_regmap),
.clks = g12a_aoclk_regmap,
.hw_data = &g12a_aoclk_onecell_data,
};
static const struct of_device_id g12a_aoclkc_match_table[] = {
{
.compatible = "amlogic,meson-g12a-aoclkc",
.data = &g12a_aoclkc_data,
},
{ }
};
MODULE_DEVICE_TABLE(of, g12a_aoclkc_match_table);
static struct platform_driver g12a_aoclkc_driver = {
.probe = meson_aoclkc_probe,
.driver = {
.name = "g12a-aoclkc",
.of_match_table = g12a_aoclkc_match_table,
},
};
module_platform_driver(g12a_aoclkc_driver);
MODULE_LICENSE("GPL v2");