1017 lines
29 KiB
C
1017 lines
29 KiB
C
// SPDX-License-Identifier: MIT
|
|
/*
|
|
* Copyright © 2020 Intel Corporation
|
|
*/
|
|
|
|
#include <linux/string_helpers.h>
|
|
|
|
#include "i915_reg.h"
|
|
#include "intel_atomic.h"
|
|
#include "intel_crtc.h"
|
|
#include "intel_ddi.h"
|
|
#include "intel_de.h"
|
|
#include "intel_display_types.h"
|
|
#include "intel_fdi.h"
|
|
#include "intel_fdi_regs.h"
|
|
|
|
struct intel_fdi_funcs {
|
|
void (*fdi_link_train)(struct intel_crtc *crtc,
|
|
const struct intel_crtc_state *crtc_state);
|
|
};
|
|
|
|
static void assert_fdi_tx(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state)
|
|
{
|
|
bool cur_state;
|
|
|
|
if (HAS_DDI(dev_priv)) {
|
|
/*
|
|
* DDI does not have a specific FDI_TX register.
|
|
*
|
|
* FDI is never fed from EDP transcoder
|
|
* so pipe->transcoder cast is fine here.
|
|
*/
|
|
enum transcoder cpu_transcoder = (enum transcoder)pipe;
|
|
cur_state = intel_de_read(dev_priv, TRANS_DDI_FUNC_CTL(cpu_transcoder)) & TRANS_DDI_FUNC_ENABLE;
|
|
} else {
|
|
cur_state = intel_de_read(dev_priv, FDI_TX_CTL(pipe)) & FDI_TX_ENABLE;
|
|
}
|
|
I915_STATE_WARN(dev_priv, cur_state != state,
|
|
"FDI TX state assertion failure (expected %s, current %s)\n",
|
|
str_on_off(state), str_on_off(cur_state));
|
|
}
|
|
|
|
void assert_fdi_tx_enabled(struct drm_i915_private *i915, enum pipe pipe)
|
|
{
|
|
assert_fdi_tx(i915, pipe, true);
|
|
}
|
|
|
|
void assert_fdi_tx_disabled(struct drm_i915_private *i915, enum pipe pipe)
|
|
{
|
|
assert_fdi_tx(i915, pipe, false);
|
|
}
|
|
|
|
static void assert_fdi_rx(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, bool state)
|
|
{
|
|
bool cur_state;
|
|
|
|
cur_state = intel_de_read(dev_priv, FDI_RX_CTL(pipe)) & FDI_RX_ENABLE;
|
|
I915_STATE_WARN(dev_priv, cur_state != state,
|
|
"FDI RX state assertion failure (expected %s, current %s)\n",
|
|
str_on_off(state), str_on_off(cur_state));
|
|
}
|
|
|
|
void assert_fdi_rx_enabled(struct drm_i915_private *i915, enum pipe pipe)
|
|
{
|
|
assert_fdi_rx(i915, pipe, true);
|
|
}
|
|
|
|
void assert_fdi_rx_disabled(struct drm_i915_private *i915, enum pipe pipe)
|
|
{
|
|
assert_fdi_rx(i915, pipe, false);
|
|
}
|
|
|
|
void assert_fdi_tx_pll_enabled(struct drm_i915_private *i915,
|
|
enum pipe pipe)
|
|
{
|
|
bool cur_state;
|
|
|
|
/* ILK FDI PLL is always enabled */
|
|
if (IS_IRONLAKE(i915))
|
|
return;
|
|
|
|
/* On Haswell, DDI ports are responsible for the FDI PLL setup */
|
|
if (HAS_DDI(i915))
|
|
return;
|
|
|
|
cur_state = intel_de_read(i915, FDI_TX_CTL(pipe)) & FDI_TX_PLL_ENABLE;
|
|
I915_STATE_WARN(i915, !cur_state,
|
|
"FDI TX PLL assertion failure, should be active but is disabled\n");
|
|
}
|
|
|
|
static void assert_fdi_rx_pll(struct drm_i915_private *i915,
|
|
enum pipe pipe, bool state)
|
|
{
|
|
bool cur_state;
|
|
|
|
cur_state = intel_de_read(i915, FDI_RX_CTL(pipe)) & FDI_RX_PLL_ENABLE;
|
|
I915_STATE_WARN(i915, cur_state != state,
|
|
"FDI RX PLL assertion failure (expected %s, current %s)\n",
|
|
str_on_off(state), str_on_off(cur_state));
|
|
}
|
|
|
|
void assert_fdi_rx_pll_enabled(struct drm_i915_private *i915, enum pipe pipe)
|
|
{
|
|
assert_fdi_rx_pll(i915, pipe, true);
|
|
}
|
|
|
|
void assert_fdi_rx_pll_disabled(struct drm_i915_private *i915, enum pipe pipe)
|
|
{
|
|
assert_fdi_rx_pll(i915, pipe, false);
|
|
}
|
|
|
|
void intel_fdi_link_train(struct intel_crtc *crtc,
|
|
const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
|
|
dev_priv->display.funcs.fdi->fdi_link_train(crtc, crtc_state);
|
|
}
|
|
|
|
/* units of 100MHz */
|
|
static int pipe_required_fdi_lanes(struct intel_crtc_state *crtc_state)
|
|
{
|
|
if (crtc_state->hw.enable && crtc_state->has_pch_encoder)
|
|
return crtc_state->fdi_lanes;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ilk_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct drm_atomic_state *state = pipe_config->uapi.state;
|
|
struct intel_crtc *other_crtc;
|
|
struct intel_crtc_state *other_crtc_state;
|
|
|
|
drm_dbg_kms(&dev_priv->drm,
|
|
"checking fdi config on pipe %c, lanes %i\n",
|
|
pipe_name(pipe), pipe_config->fdi_lanes);
|
|
if (pipe_config->fdi_lanes > 4) {
|
|
drm_dbg_kms(&dev_priv->drm,
|
|
"invalid fdi lane config on pipe %c: %i lanes\n",
|
|
pipe_name(pipe), pipe_config->fdi_lanes);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
|
|
if (pipe_config->fdi_lanes > 2) {
|
|
drm_dbg_kms(&dev_priv->drm,
|
|
"only 2 lanes on haswell, required: %i lanes\n",
|
|
pipe_config->fdi_lanes);
|
|
return -EINVAL;
|
|
} else {
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
if (INTEL_NUM_PIPES(dev_priv) == 2)
|
|
return 0;
|
|
|
|
/* Ivybridge 3 pipe is really complicated */
|
|
switch (pipe) {
|
|
case PIPE_A:
|
|
return 0;
|
|
case PIPE_B:
|
|
if (pipe_config->fdi_lanes <= 2)
|
|
return 0;
|
|
|
|
other_crtc = intel_crtc_for_pipe(dev_priv, PIPE_C);
|
|
other_crtc_state =
|
|
intel_atomic_get_crtc_state(state, other_crtc);
|
|
if (IS_ERR(other_crtc_state))
|
|
return PTR_ERR(other_crtc_state);
|
|
|
|
if (pipe_required_fdi_lanes(other_crtc_state) > 0) {
|
|
drm_dbg_kms(&dev_priv->drm,
|
|
"invalid shared fdi lane config on pipe %c: %i lanes\n",
|
|
pipe_name(pipe), pipe_config->fdi_lanes);
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
case PIPE_C:
|
|
if (pipe_config->fdi_lanes > 2) {
|
|
drm_dbg_kms(&dev_priv->drm,
|
|
"only 2 lanes on pipe %c: required %i lanes\n",
|
|
pipe_name(pipe), pipe_config->fdi_lanes);
|
|
return -EINVAL;
|
|
}
|
|
|
|
other_crtc = intel_crtc_for_pipe(dev_priv, PIPE_B);
|
|
other_crtc_state =
|
|
intel_atomic_get_crtc_state(state, other_crtc);
|
|
if (IS_ERR(other_crtc_state))
|
|
return PTR_ERR(other_crtc_state);
|
|
|
|
if (pipe_required_fdi_lanes(other_crtc_state) > 2) {
|
|
drm_dbg_kms(&dev_priv->drm,
|
|
"fdi link B uses too many lanes to enable link C\n");
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
default:
|
|
MISSING_CASE(pipe);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
void intel_fdi_pll_freq_update(struct drm_i915_private *i915)
|
|
{
|
|
if (IS_IRONLAKE(i915)) {
|
|
u32 fdi_pll_clk =
|
|
intel_de_read(i915, FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK;
|
|
|
|
i915->display.fdi.pll_freq = (fdi_pll_clk + 2) * 10000;
|
|
} else if (IS_SANDYBRIDGE(i915) || IS_IVYBRIDGE(i915)) {
|
|
i915->display.fdi.pll_freq = 270000;
|
|
} else {
|
|
return;
|
|
}
|
|
|
|
drm_dbg(&i915->drm, "FDI PLL freq=%d\n", i915->display.fdi.pll_freq);
|
|
}
|
|
|
|
int intel_fdi_link_freq(struct drm_i915_private *i915,
|
|
const struct intel_crtc_state *pipe_config)
|
|
{
|
|
if (HAS_DDI(i915))
|
|
return pipe_config->port_clock; /* SPLL */
|
|
else
|
|
return i915->display.fdi.pll_freq;
|
|
}
|
|
|
|
int ilk_fdi_compute_config(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *i915 = to_i915(dev);
|
|
const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
|
|
int lane, link_bw, fdi_dotclock, ret;
|
|
bool needs_recompute = false;
|
|
|
|
retry:
|
|
/* FDI is a binary signal running at ~2.7GHz, encoding
|
|
* each output octet as 10 bits. The actual frequency
|
|
* is stored as a divider into a 100MHz clock, and the
|
|
* mode pixel clock is stored in units of 1KHz.
|
|
* Hence the bw of each lane in terms of the mode signal
|
|
* is:
|
|
*/
|
|
link_bw = intel_fdi_link_freq(i915, pipe_config);
|
|
|
|
fdi_dotclock = adjusted_mode->crtc_clock;
|
|
|
|
lane = ilk_get_lanes_required(fdi_dotclock, link_bw,
|
|
pipe_config->pipe_bpp);
|
|
|
|
pipe_config->fdi_lanes = lane;
|
|
|
|
intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
|
|
link_bw, &pipe_config->fdi_m_n, false);
|
|
|
|
ret = ilk_check_fdi_lanes(dev, crtc->pipe, pipe_config);
|
|
if (ret == -EDEADLK)
|
|
return ret;
|
|
|
|
if (ret == -EINVAL && pipe_config->pipe_bpp > 6*3) {
|
|
pipe_config->pipe_bpp -= 2*3;
|
|
drm_dbg_kms(&i915->drm,
|
|
"fdi link bw constraint, reducing pipe bpp to %i\n",
|
|
pipe_config->pipe_bpp);
|
|
needs_recompute = true;
|
|
pipe_config->bw_constrained = true;
|
|
|
|
goto retry;
|
|
}
|
|
|
|
if (needs_recompute)
|
|
return -EAGAIN;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void cpt_set_fdi_bc_bifurcation(struct drm_i915_private *dev_priv, bool enable)
|
|
{
|
|
u32 temp;
|
|
|
|
temp = intel_de_read(dev_priv, SOUTH_CHICKEN1);
|
|
if (!!(temp & FDI_BC_BIFURCATION_SELECT) == enable)
|
|
return;
|
|
|
|
drm_WARN_ON(&dev_priv->drm,
|
|
intel_de_read(dev_priv, FDI_RX_CTL(PIPE_B)) &
|
|
FDI_RX_ENABLE);
|
|
drm_WARN_ON(&dev_priv->drm,
|
|
intel_de_read(dev_priv, FDI_RX_CTL(PIPE_C)) &
|
|
FDI_RX_ENABLE);
|
|
|
|
temp &= ~FDI_BC_BIFURCATION_SELECT;
|
|
if (enable)
|
|
temp |= FDI_BC_BIFURCATION_SELECT;
|
|
|
|
drm_dbg_kms(&dev_priv->drm, "%sabling fdi C rx\n",
|
|
enable ? "en" : "dis");
|
|
intel_de_write(dev_priv, SOUTH_CHICKEN1, temp);
|
|
intel_de_posting_read(dev_priv, SOUTH_CHICKEN1);
|
|
}
|
|
|
|
static void ivb_update_fdi_bc_bifurcation(const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
|
|
switch (crtc->pipe) {
|
|
case PIPE_A:
|
|
break;
|
|
case PIPE_B:
|
|
if (crtc_state->fdi_lanes > 2)
|
|
cpt_set_fdi_bc_bifurcation(dev_priv, false);
|
|
else
|
|
cpt_set_fdi_bc_bifurcation(dev_priv, true);
|
|
|
|
break;
|
|
case PIPE_C:
|
|
cpt_set_fdi_bc_bifurcation(dev_priv, true);
|
|
|
|
break;
|
|
default:
|
|
MISSING_CASE(crtc->pipe);
|
|
}
|
|
}
|
|
|
|
void intel_fdi_normal_train(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
enum pipe pipe = crtc->pipe;
|
|
i915_reg_t reg;
|
|
u32 temp;
|
|
|
|
/* enable normal train */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
if (IS_IVYBRIDGE(dev_priv)) {
|
|
temp &= ~FDI_LINK_TRAIN_NONE_IVB;
|
|
temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
|
|
} else {
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
|
|
}
|
|
intel_de_write(dev_priv, reg, temp);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
if (HAS_PCH_CPT(dev_priv)) {
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp |= FDI_LINK_TRAIN_NORMAL_CPT;
|
|
} else {
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_NONE;
|
|
}
|
|
intel_de_write(dev_priv, reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
|
|
|
|
/* wait one idle pattern time */
|
|
intel_de_posting_read(dev_priv, reg);
|
|
udelay(1000);
|
|
|
|
/* IVB wants error correction enabled */
|
|
if (IS_IVYBRIDGE(dev_priv))
|
|
intel_de_rmw(dev_priv, reg, 0, FDI_FS_ERRC_ENABLE | FDI_FE_ERRC_ENABLE);
|
|
}
|
|
|
|
/* The FDI link training functions for ILK/Ibexpeak. */
|
|
static void ilk_fdi_link_train(struct intel_crtc *crtc,
|
|
const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
enum pipe pipe = crtc->pipe;
|
|
i915_reg_t reg;
|
|
u32 temp, tries;
|
|
|
|
/*
|
|
* Write the TU size bits before fdi link training, so that error
|
|
* detection works.
|
|
*/
|
|
intel_de_write(dev_priv, FDI_RX_TUSIZE1(pipe),
|
|
intel_de_read(dev_priv, PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
|
|
|
|
/* FDI needs bits from pipe first */
|
|
assert_transcoder_enabled(dev_priv, crtc_state->cpu_transcoder);
|
|
|
|
/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
|
|
for train result */
|
|
reg = FDI_RX_IMR(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
temp &= ~FDI_RX_SYMBOL_LOCK;
|
|
temp &= ~FDI_RX_BIT_LOCK;
|
|
intel_de_write(dev_priv, reg, temp);
|
|
intel_de_read(dev_priv, reg);
|
|
udelay(150);
|
|
|
|
/* enable CPU FDI TX and PCH FDI RX */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
temp &= ~FDI_DP_PORT_WIDTH_MASK;
|
|
temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
intel_de_write(dev_priv, reg, temp | FDI_TX_ENABLE);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
intel_de_write(dev_priv, reg, temp | FDI_RX_ENABLE);
|
|
|
|
intel_de_posting_read(dev_priv, reg);
|
|
udelay(150);
|
|
|
|
/* Ironlake workaround, enable clock pointer after FDI enable*/
|
|
intel_de_write(dev_priv, FDI_RX_CHICKEN(pipe),
|
|
FDI_RX_PHASE_SYNC_POINTER_OVR);
|
|
intel_de_write(dev_priv, FDI_RX_CHICKEN(pipe),
|
|
FDI_RX_PHASE_SYNC_POINTER_OVR | FDI_RX_PHASE_SYNC_POINTER_EN);
|
|
|
|
reg = FDI_RX_IIR(pipe);
|
|
for (tries = 0; tries < 5; tries++) {
|
|
temp = intel_de_read(dev_priv, reg);
|
|
drm_dbg_kms(&dev_priv->drm, "FDI_RX_IIR 0x%x\n", temp);
|
|
|
|
if ((temp & FDI_RX_BIT_LOCK)) {
|
|
drm_dbg_kms(&dev_priv->drm, "FDI train 1 done.\n");
|
|
intel_de_write(dev_priv, reg, temp | FDI_RX_BIT_LOCK);
|
|
break;
|
|
}
|
|
}
|
|
if (tries == 5)
|
|
drm_err(&dev_priv->drm, "FDI train 1 fail!\n");
|
|
|
|
/* Train 2 */
|
|
intel_de_rmw(dev_priv, FDI_TX_CTL(pipe),
|
|
FDI_LINK_TRAIN_NONE, FDI_LINK_TRAIN_PATTERN_2);
|
|
intel_de_rmw(dev_priv, FDI_RX_CTL(pipe),
|
|
FDI_LINK_TRAIN_NONE, FDI_LINK_TRAIN_PATTERN_2);
|
|
intel_de_posting_read(dev_priv, FDI_RX_CTL(pipe));
|
|
udelay(150);
|
|
|
|
reg = FDI_RX_IIR(pipe);
|
|
for (tries = 0; tries < 5; tries++) {
|
|
temp = intel_de_read(dev_priv, reg);
|
|
drm_dbg_kms(&dev_priv->drm, "FDI_RX_IIR 0x%x\n", temp);
|
|
|
|
if (temp & FDI_RX_SYMBOL_LOCK) {
|
|
intel_de_write(dev_priv, reg,
|
|
temp | FDI_RX_SYMBOL_LOCK);
|
|
drm_dbg_kms(&dev_priv->drm, "FDI train 2 done.\n");
|
|
break;
|
|
}
|
|
}
|
|
if (tries == 5)
|
|
drm_err(&dev_priv->drm, "FDI train 2 fail!\n");
|
|
|
|
drm_dbg_kms(&dev_priv->drm, "FDI train done\n");
|
|
|
|
}
|
|
|
|
static const int snb_b_fdi_train_param[] = {
|
|
FDI_LINK_TRAIN_400MV_0DB_SNB_B,
|
|
FDI_LINK_TRAIN_400MV_6DB_SNB_B,
|
|
FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
|
|
FDI_LINK_TRAIN_800MV_0DB_SNB_B,
|
|
};
|
|
|
|
/* The FDI link training functions for SNB/Cougarpoint. */
|
|
static void gen6_fdi_link_train(struct intel_crtc *crtc,
|
|
const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
enum pipe pipe = crtc->pipe;
|
|
i915_reg_t reg;
|
|
u32 temp, i, retry;
|
|
|
|
/*
|
|
* Write the TU size bits before fdi link training, so that error
|
|
* detection works.
|
|
*/
|
|
intel_de_write(dev_priv, FDI_RX_TUSIZE1(pipe),
|
|
intel_de_read(dev_priv, PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
|
|
|
|
/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
|
|
for train result */
|
|
reg = FDI_RX_IMR(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
temp &= ~FDI_RX_SYMBOL_LOCK;
|
|
temp &= ~FDI_RX_BIT_LOCK;
|
|
intel_de_write(dev_priv, reg, temp);
|
|
|
|
intel_de_posting_read(dev_priv, reg);
|
|
udelay(150);
|
|
|
|
/* enable CPU FDI TX and PCH FDI RX */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
temp &= ~FDI_DP_PORT_WIDTH_MASK;
|
|
temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
|
|
/* SNB-B */
|
|
temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
|
|
intel_de_write(dev_priv, reg, temp | FDI_TX_ENABLE);
|
|
|
|
intel_de_write(dev_priv, FDI_RX_MISC(pipe),
|
|
FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
if (HAS_PCH_CPT(dev_priv)) {
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
|
|
} else {
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
}
|
|
intel_de_write(dev_priv, reg, temp | FDI_RX_ENABLE);
|
|
|
|
intel_de_posting_read(dev_priv, reg);
|
|
udelay(150);
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
intel_de_rmw(dev_priv, FDI_TX_CTL(pipe),
|
|
FDI_LINK_TRAIN_VOL_EMP_MASK, snb_b_fdi_train_param[i]);
|
|
intel_de_posting_read(dev_priv, FDI_TX_CTL(pipe));
|
|
udelay(500);
|
|
|
|
for (retry = 0; retry < 5; retry++) {
|
|
reg = FDI_RX_IIR(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
drm_dbg_kms(&dev_priv->drm, "FDI_RX_IIR 0x%x\n", temp);
|
|
if (temp & FDI_RX_BIT_LOCK) {
|
|
intel_de_write(dev_priv, reg,
|
|
temp | FDI_RX_BIT_LOCK);
|
|
drm_dbg_kms(&dev_priv->drm,
|
|
"FDI train 1 done.\n");
|
|
break;
|
|
}
|
|
udelay(50);
|
|
}
|
|
if (retry < 5)
|
|
break;
|
|
}
|
|
if (i == 4)
|
|
drm_err(&dev_priv->drm, "FDI train 1 fail!\n");
|
|
|
|
/* Train 2 */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2;
|
|
if (IS_SANDYBRIDGE(dev_priv)) {
|
|
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
|
|
/* SNB-B */
|
|
temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
|
|
}
|
|
intel_de_write(dev_priv, reg, temp);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
if (HAS_PCH_CPT(dev_priv)) {
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
|
|
} else {
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_2;
|
|
}
|
|
intel_de_write(dev_priv, reg, temp);
|
|
|
|
intel_de_posting_read(dev_priv, reg);
|
|
udelay(150);
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
intel_de_rmw(dev_priv, FDI_TX_CTL(pipe),
|
|
FDI_LINK_TRAIN_VOL_EMP_MASK, snb_b_fdi_train_param[i]);
|
|
intel_de_posting_read(dev_priv, FDI_TX_CTL(pipe));
|
|
udelay(500);
|
|
|
|
for (retry = 0; retry < 5; retry++) {
|
|
reg = FDI_RX_IIR(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
drm_dbg_kms(&dev_priv->drm, "FDI_RX_IIR 0x%x\n", temp);
|
|
if (temp & FDI_RX_SYMBOL_LOCK) {
|
|
intel_de_write(dev_priv, reg,
|
|
temp | FDI_RX_SYMBOL_LOCK);
|
|
drm_dbg_kms(&dev_priv->drm,
|
|
"FDI train 2 done.\n");
|
|
break;
|
|
}
|
|
udelay(50);
|
|
}
|
|
if (retry < 5)
|
|
break;
|
|
}
|
|
if (i == 4)
|
|
drm_err(&dev_priv->drm, "FDI train 2 fail!\n");
|
|
|
|
drm_dbg_kms(&dev_priv->drm, "FDI train done.\n");
|
|
}
|
|
|
|
/* Manual link training for Ivy Bridge A0 parts */
|
|
static void ivb_manual_fdi_link_train(struct intel_crtc *crtc,
|
|
const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
enum pipe pipe = crtc->pipe;
|
|
i915_reg_t reg;
|
|
u32 temp, i, j;
|
|
|
|
ivb_update_fdi_bc_bifurcation(crtc_state);
|
|
|
|
/*
|
|
* Write the TU size bits before fdi link training, so that error
|
|
* detection works.
|
|
*/
|
|
intel_de_write(dev_priv, FDI_RX_TUSIZE1(pipe),
|
|
intel_de_read(dev_priv, PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
|
|
|
|
/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
|
|
for train result */
|
|
reg = FDI_RX_IMR(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
temp &= ~FDI_RX_SYMBOL_LOCK;
|
|
temp &= ~FDI_RX_BIT_LOCK;
|
|
intel_de_write(dev_priv, reg, temp);
|
|
|
|
intel_de_posting_read(dev_priv, reg);
|
|
udelay(150);
|
|
|
|
drm_dbg_kms(&dev_priv->drm, "FDI_RX_IIR before link train 0x%x\n",
|
|
intel_de_read(dev_priv, FDI_RX_IIR(pipe)));
|
|
|
|
/* Try each vswing and preemphasis setting twice before moving on */
|
|
for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
|
|
/* disable first in case we need to retry */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
|
|
temp &= ~FDI_TX_ENABLE;
|
|
intel_de_write(dev_priv, reg, temp);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
temp &= ~FDI_LINK_TRAIN_AUTO;
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp &= ~FDI_RX_ENABLE;
|
|
intel_de_write(dev_priv, reg, temp);
|
|
|
|
/* enable CPU FDI TX and PCH FDI RX */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
temp &= ~FDI_DP_PORT_WIDTH_MASK;
|
|
temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
|
|
temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
|
|
temp |= snb_b_fdi_train_param[j/2];
|
|
temp |= FDI_COMPOSITE_SYNC;
|
|
intel_de_write(dev_priv, reg, temp | FDI_TX_ENABLE);
|
|
|
|
intel_de_write(dev_priv, FDI_RX_MISC(pipe),
|
|
FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
|
|
temp |= FDI_COMPOSITE_SYNC;
|
|
intel_de_write(dev_priv, reg, temp | FDI_RX_ENABLE);
|
|
|
|
intel_de_posting_read(dev_priv, reg);
|
|
udelay(1); /* should be 0.5us */
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
reg = FDI_RX_IIR(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
drm_dbg_kms(&dev_priv->drm, "FDI_RX_IIR 0x%x\n", temp);
|
|
|
|
if (temp & FDI_RX_BIT_LOCK ||
|
|
(intel_de_read(dev_priv, reg) & FDI_RX_BIT_LOCK)) {
|
|
intel_de_write(dev_priv, reg,
|
|
temp | FDI_RX_BIT_LOCK);
|
|
drm_dbg_kms(&dev_priv->drm,
|
|
"FDI train 1 done, level %i.\n",
|
|
i);
|
|
break;
|
|
}
|
|
udelay(1); /* should be 0.5us */
|
|
}
|
|
if (i == 4) {
|
|
drm_dbg_kms(&dev_priv->drm,
|
|
"FDI train 1 fail on vswing %d\n", j / 2);
|
|
continue;
|
|
}
|
|
|
|
/* Train 2 */
|
|
intel_de_rmw(dev_priv, FDI_TX_CTL(pipe),
|
|
FDI_LINK_TRAIN_NONE_IVB,
|
|
FDI_LINK_TRAIN_PATTERN_2_IVB);
|
|
intel_de_rmw(dev_priv, FDI_RX_CTL(pipe),
|
|
FDI_LINK_TRAIN_PATTERN_MASK_CPT,
|
|
FDI_LINK_TRAIN_PATTERN_2_CPT);
|
|
intel_de_posting_read(dev_priv, FDI_RX_CTL(pipe));
|
|
udelay(2); /* should be 1.5us */
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
reg = FDI_RX_IIR(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
drm_dbg_kms(&dev_priv->drm, "FDI_RX_IIR 0x%x\n", temp);
|
|
|
|
if (temp & FDI_RX_SYMBOL_LOCK ||
|
|
(intel_de_read(dev_priv, reg) & FDI_RX_SYMBOL_LOCK)) {
|
|
intel_de_write(dev_priv, reg,
|
|
temp | FDI_RX_SYMBOL_LOCK);
|
|
drm_dbg_kms(&dev_priv->drm,
|
|
"FDI train 2 done, level %i.\n",
|
|
i);
|
|
goto train_done;
|
|
}
|
|
udelay(2); /* should be 1.5us */
|
|
}
|
|
if (i == 4)
|
|
drm_dbg_kms(&dev_priv->drm,
|
|
"FDI train 2 fail on vswing %d\n", j / 2);
|
|
}
|
|
|
|
train_done:
|
|
drm_dbg_kms(&dev_priv->drm, "FDI train done.\n");
|
|
}
|
|
|
|
/* Starting with Haswell, different DDI ports can work in FDI mode for
|
|
* connection to the PCH-located connectors. For this, it is necessary to train
|
|
* both the DDI port and PCH receiver for the desired DDI buffer settings.
|
|
*
|
|
* The recommended port to work in FDI mode is DDI E, which we use here. Also,
|
|
* please note that when FDI mode is active on DDI E, it shares 2 lines with
|
|
* DDI A (which is used for eDP)
|
|
*/
|
|
void hsw_fdi_link_train(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
u32 temp, i, rx_ctl_val;
|
|
int n_entries;
|
|
|
|
encoder->get_buf_trans(encoder, crtc_state, &n_entries);
|
|
|
|
hsw_prepare_dp_ddi_buffers(encoder, crtc_state);
|
|
|
|
/* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
|
|
* mode set "sequence for CRT port" document:
|
|
* - TP1 to TP2 time with the default value
|
|
* - FDI delay to 90h
|
|
*
|
|
* WaFDIAutoLinkSetTimingOverrride:hsw
|
|
*/
|
|
intel_de_write(dev_priv, FDI_RX_MISC(PIPE_A),
|
|
FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2) | FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
|
|
|
|
/* Enable the PCH Receiver FDI PLL */
|
|
rx_ctl_val = dev_priv->display.fdi.rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
|
|
FDI_RX_PLL_ENABLE |
|
|
FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
|
|
intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
|
|
intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A));
|
|
udelay(220);
|
|
|
|
/* Switch from Rawclk to PCDclk */
|
|
rx_ctl_val |= FDI_PCDCLK;
|
|
intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
|
|
|
|
/* Configure Port Clock Select */
|
|
drm_WARN_ON(&dev_priv->drm, crtc_state->shared_dpll->info->id != DPLL_ID_SPLL);
|
|
intel_ddi_enable_clock(encoder, crtc_state);
|
|
|
|
/* Start the training iterating through available voltages and emphasis,
|
|
* testing each value twice. */
|
|
for (i = 0; i < n_entries * 2; i++) {
|
|
/* Configure DP_TP_CTL with auto-training */
|
|
intel_de_write(dev_priv, DP_TP_CTL(PORT_E),
|
|
DP_TP_CTL_FDI_AUTOTRAIN |
|
|
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
|
|
DP_TP_CTL_LINK_TRAIN_PAT1 |
|
|
DP_TP_CTL_ENABLE);
|
|
|
|
/* Configure and enable DDI_BUF_CTL for DDI E with next voltage.
|
|
* DDI E does not support port reversal, the functionality is
|
|
* achieved on the PCH side in FDI_RX_CTL, so no need to set the
|
|
* port reversal bit */
|
|
intel_de_write(dev_priv, DDI_BUF_CTL(PORT_E),
|
|
DDI_BUF_CTL_ENABLE | ((crtc_state->fdi_lanes - 1) << 1) | DDI_BUF_TRANS_SELECT(i / 2));
|
|
intel_de_posting_read(dev_priv, DDI_BUF_CTL(PORT_E));
|
|
|
|
udelay(600);
|
|
|
|
/* Program PCH FDI Receiver TU */
|
|
intel_de_write(dev_priv, FDI_RX_TUSIZE1(PIPE_A), TU_SIZE(64));
|
|
|
|
/* Enable PCH FDI Receiver with auto-training */
|
|
rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO;
|
|
intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
|
|
intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A));
|
|
|
|
/* Wait for FDI receiver lane calibration */
|
|
udelay(30);
|
|
|
|
/* Unset FDI_RX_MISC pwrdn lanes */
|
|
intel_de_rmw(dev_priv, FDI_RX_MISC(PIPE_A),
|
|
FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK, 0);
|
|
intel_de_posting_read(dev_priv, FDI_RX_MISC(PIPE_A));
|
|
|
|
/* Wait for FDI auto training time */
|
|
udelay(5);
|
|
|
|
temp = intel_de_read(dev_priv, DP_TP_STATUS(PORT_E));
|
|
if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
|
|
drm_dbg_kms(&dev_priv->drm,
|
|
"FDI link training done on step %d\n", i);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Leave things enabled even if we failed to train FDI.
|
|
* Results in less fireworks from the state checker.
|
|
*/
|
|
if (i == n_entries * 2 - 1) {
|
|
drm_err(&dev_priv->drm, "FDI link training failed!\n");
|
|
break;
|
|
}
|
|
|
|
rx_ctl_val &= ~FDI_RX_ENABLE;
|
|
intel_de_write(dev_priv, FDI_RX_CTL(PIPE_A), rx_ctl_val);
|
|
intel_de_posting_read(dev_priv, FDI_RX_CTL(PIPE_A));
|
|
|
|
intel_de_rmw(dev_priv, DDI_BUF_CTL(PORT_E), DDI_BUF_CTL_ENABLE, 0);
|
|
intel_de_posting_read(dev_priv, DDI_BUF_CTL(PORT_E));
|
|
|
|
/* Disable DP_TP_CTL and FDI_RX_CTL and retry */
|
|
intel_de_rmw(dev_priv, DP_TP_CTL(PORT_E), DP_TP_CTL_ENABLE, 0);
|
|
intel_de_posting_read(dev_priv, DP_TP_CTL(PORT_E));
|
|
|
|
intel_wait_ddi_buf_idle(dev_priv, PORT_E);
|
|
|
|
/* Reset FDI_RX_MISC pwrdn lanes */
|
|
intel_de_rmw(dev_priv, FDI_RX_MISC(PIPE_A),
|
|
FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK,
|
|
FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2));
|
|
intel_de_posting_read(dev_priv, FDI_RX_MISC(PIPE_A));
|
|
}
|
|
|
|
/* Enable normal pixel sending for FDI */
|
|
intel_de_write(dev_priv, DP_TP_CTL(PORT_E),
|
|
DP_TP_CTL_FDI_AUTOTRAIN |
|
|
DP_TP_CTL_LINK_TRAIN_NORMAL |
|
|
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
|
|
DP_TP_CTL_ENABLE);
|
|
}
|
|
|
|
void hsw_fdi_disable(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
|
|
/*
|
|
* Bspec lists this as both step 13 (before DDI_BUF_CTL disable)
|
|
* and step 18 (after clearing PORT_CLK_SEL). Based on a BUN,
|
|
* step 13 is the correct place for it. Step 18 is where it was
|
|
* originally before the BUN.
|
|
*/
|
|
intel_de_rmw(dev_priv, FDI_RX_CTL(PIPE_A), FDI_RX_ENABLE, 0);
|
|
intel_de_rmw(dev_priv, DDI_BUF_CTL(PORT_E), DDI_BUF_CTL_ENABLE, 0);
|
|
intel_wait_ddi_buf_idle(dev_priv, PORT_E);
|
|
intel_ddi_disable_clock(encoder);
|
|
intel_de_rmw(dev_priv, FDI_RX_MISC(PIPE_A),
|
|
FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK,
|
|
FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2));
|
|
intel_de_rmw(dev_priv, FDI_RX_CTL(PIPE_A), FDI_PCDCLK, 0);
|
|
intel_de_rmw(dev_priv, FDI_RX_CTL(PIPE_A), FDI_RX_PLL_ENABLE, 0);
|
|
}
|
|
|
|
void ilk_fdi_pll_enable(const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
enum pipe pipe = crtc->pipe;
|
|
i915_reg_t reg;
|
|
u32 temp;
|
|
|
|
/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
|
|
temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
|
|
temp |= (intel_de_read(dev_priv, TRANSCONF(pipe)) & TRANSCONF_BPC_MASK) << 11;
|
|
intel_de_write(dev_priv, reg, temp | FDI_RX_PLL_ENABLE);
|
|
|
|
intel_de_posting_read(dev_priv, reg);
|
|
udelay(200);
|
|
|
|
/* Switch from Rawclk to PCDclk */
|
|
intel_de_rmw(dev_priv, reg, 0, FDI_PCDCLK);
|
|
intel_de_posting_read(dev_priv, reg);
|
|
udelay(200);
|
|
|
|
/* Enable CPU FDI TX PLL, always on for Ironlake */
|
|
reg = FDI_TX_CTL(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
if ((temp & FDI_TX_PLL_ENABLE) == 0) {
|
|
intel_de_write(dev_priv, reg, temp | FDI_TX_PLL_ENABLE);
|
|
|
|
intel_de_posting_read(dev_priv, reg);
|
|
udelay(100);
|
|
}
|
|
}
|
|
|
|
void ilk_fdi_pll_disable(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
enum pipe pipe = crtc->pipe;
|
|
|
|
/* Switch from PCDclk to Rawclk */
|
|
intel_de_rmw(dev_priv, FDI_RX_CTL(pipe), FDI_PCDCLK, 0);
|
|
|
|
/* Disable CPU FDI TX PLL */
|
|
intel_de_rmw(dev_priv, FDI_TX_CTL(pipe), FDI_TX_PLL_ENABLE, 0);
|
|
intel_de_posting_read(dev_priv, FDI_TX_CTL(pipe));
|
|
udelay(100);
|
|
|
|
/* Wait for the clocks to turn off. */
|
|
intel_de_rmw(dev_priv, FDI_RX_CTL(pipe), FDI_RX_PLL_ENABLE, 0);
|
|
intel_de_posting_read(dev_priv, FDI_RX_CTL(pipe));
|
|
udelay(100);
|
|
}
|
|
|
|
void ilk_fdi_disable(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
enum pipe pipe = crtc->pipe;
|
|
i915_reg_t reg;
|
|
u32 temp;
|
|
|
|
/* disable CPU FDI tx and PCH FDI rx */
|
|
intel_de_rmw(dev_priv, FDI_TX_CTL(pipe), FDI_TX_ENABLE, 0);
|
|
intel_de_posting_read(dev_priv, FDI_TX_CTL(pipe));
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
temp &= ~(0x7 << 16);
|
|
temp |= (intel_de_read(dev_priv, TRANSCONF(pipe)) & TRANSCONF_BPC_MASK) << 11;
|
|
intel_de_write(dev_priv, reg, temp & ~FDI_RX_ENABLE);
|
|
|
|
intel_de_posting_read(dev_priv, reg);
|
|
udelay(100);
|
|
|
|
/* Ironlake workaround, disable clock pointer after downing FDI */
|
|
if (HAS_PCH_IBX(dev_priv))
|
|
intel_de_write(dev_priv, FDI_RX_CHICKEN(pipe),
|
|
FDI_RX_PHASE_SYNC_POINTER_OVR);
|
|
|
|
/* still set train pattern 1 */
|
|
intel_de_rmw(dev_priv, FDI_TX_CTL(pipe),
|
|
FDI_LINK_TRAIN_NONE, FDI_LINK_TRAIN_PATTERN_1);
|
|
|
|
reg = FDI_RX_CTL(pipe);
|
|
temp = intel_de_read(dev_priv, reg);
|
|
if (HAS_PCH_CPT(dev_priv)) {
|
|
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
|
|
} else {
|
|
temp &= ~FDI_LINK_TRAIN_NONE;
|
|
temp |= FDI_LINK_TRAIN_PATTERN_1;
|
|
}
|
|
/* BPC in FDI rx is consistent with that in TRANSCONF */
|
|
temp &= ~(0x07 << 16);
|
|
temp |= (intel_de_read(dev_priv, TRANSCONF(pipe)) & TRANSCONF_BPC_MASK) << 11;
|
|
intel_de_write(dev_priv, reg, temp);
|
|
|
|
intel_de_posting_read(dev_priv, reg);
|
|
udelay(100);
|
|
}
|
|
|
|
static const struct intel_fdi_funcs ilk_funcs = {
|
|
.fdi_link_train = ilk_fdi_link_train,
|
|
};
|
|
|
|
static const struct intel_fdi_funcs gen6_funcs = {
|
|
.fdi_link_train = gen6_fdi_link_train,
|
|
};
|
|
|
|
static const struct intel_fdi_funcs ivb_funcs = {
|
|
.fdi_link_train = ivb_manual_fdi_link_train,
|
|
};
|
|
|
|
void
|
|
intel_fdi_init_hook(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (IS_IRONLAKE(dev_priv)) {
|
|
dev_priv->display.funcs.fdi = &ilk_funcs;
|
|
} else if (IS_SANDYBRIDGE(dev_priv)) {
|
|
dev_priv->display.funcs.fdi = &gen6_funcs;
|
|
} else if (IS_IVYBRIDGE(dev_priv)) {
|
|
/* FIXME: detect B0+ stepping and use auto training */
|
|
dev_priv->display.funcs.fdi = &ivb_funcs;
|
|
}
|
|
}
|