940 lines
24 KiB
C
940 lines
24 KiB
C
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
/*
|
|
* LTC2992 - Dual Wide Range Power Monitor
|
|
*
|
|
* Copyright 2020 Analog Devices Inc.
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define LTC2992_CTRLB 0x01
|
|
#define LTC2992_FAULT1 0x03
|
|
#define LTC2992_POWER1 0x05
|
|
#define LTC2992_POWER1_MAX 0x08
|
|
#define LTC2992_POWER1_MIN 0x0B
|
|
#define LTC2992_POWER1_MAX_THRESH 0x0E
|
|
#define LTC2992_POWER1_MIN_THRESH 0x11
|
|
#define LTC2992_DSENSE1 0x14
|
|
#define LTC2992_DSENSE1_MAX 0x16
|
|
#define LTC2992_DSENSE1_MIN 0x18
|
|
#define LTC2992_DSENSE1_MAX_THRESH 0x1A
|
|
#define LTC2992_DSENSE1_MIN_THRESH 0x1C
|
|
#define LTC2992_SENSE1 0x1E
|
|
#define LTC2992_SENSE1_MAX 0x20
|
|
#define LTC2992_SENSE1_MIN 0x22
|
|
#define LTC2992_SENSE1_MAX_THRESH 0x24
|
|
#define LTC2992_SENSE1_MIN_THRESH 0x26
|
|
#define LTC2992_G1 0x28
|
|
#define LTC2992_G1_MAX 0x2A
|
|
#define LTC2992_G1_MIN 0x2C
|
|
#define LTC2992_G1_MAX_THRESH 0x2E
|
|
#define LTC2992_G1_MIN_THRESH 0x30
|
|
#define LTC2992_FAULT2 0x35
|
|
#define LTC2992_G2 0x5A
|
|
#define LTC2992_G2_MAX 0x5C
|
|
#define LTC2992_G2_MIN 0x5E
|
|
#define LTC2992_G2_MAX_THRESH 0x60
|
|
#define LTC2992_G2_MIN_THRESH 0x62
|
|
#define LTC2992_G3 0x64
|
|
#define LTC2992_G3_MAX 0x66
|
|
#define LTC2992_G3_MIN 0x68
|
|
#define LTC2992_G3_MAX_THRESH 0x6A
|
|
#define LTC2992_G3_MIN_THRESH 0x6C
|
|
#define LTC2992_G4 0x6E
|
|
#define LTC2992_G4_MAX 0x70
|
|
#define LTC2992_G4_MIN 0x72
|
|
#define LTC2992_G4_MAX_THRESH 0x74
|
|
#define LTC2992_G4_MIN_THRESH 0x76
|
|
#define LTC2992_FAULT3 0x92
|
|
#define LTC2992_GPIO_STATUS 0x95
|
|
#define LTC2992_GPIO_IO_CTRL 0x96
|
|
#define LTC2992_GPIO_CTRL 0x97
|
|
|
|
#define LTC2992_POWER(x) (LTC2992_POWER1 + ((x) * 0x32))
|
|
#define LTC2992_POWER_MAX(x) (LTC2992_POWER1_MAX + ((x) * 0x32))
|
|
#define LTC2992_POWER_MIN(x) (LTC2992_POWER1_MIN + ((x) * 0x32))
|
|
#define LTC2992_POWER_MAX_THRESH(x) (LTC2992_POWER1_MAX_THRESH + ((x) * 0x32))
|
|
#define LTC2992_POWER_MIN_THRESH(x) (LTC2992_POWER1_MIN_THRESH + ((x) * 0x32))
|
|
#define LTC2992_DSENSE(x) (LTC2992_DSENSE1 + ((x) * 0x32))
|
|
#define LTC2992_DSENSE_MAX(x) (LTC2992_DSENSE1_MAX + ((x) * 0x32))
|
|
#define LTC2992_DSENSE_MIN(x) (LTC2992_DSENSE1_MIN + ((x) * 0x32))
|
|
#define LTC2992_DSENSE_MAX_THRESH(x) (LTC2992_DSENSE1_MAX_THRESH + ((x) * 0x32))
|
|
#define LTC2992_DSENSE_MIN_THRESH(x) (LTC2992_DSENSE1_MIN_THRESH + ((x) * 0x32))
|
|
#define LTC2992_SENSE(x) (LTC2992_SENSE1 + ((x) * 0x32))
|
|
#define LTC2992_SENSE_MAX(x) (LTC2992_SENSE1_MAX + ((x) * 0x32))
|
|
#define LTC2992_SENSE_MIN(x) (LTC2992_SENSE1_MIN + ((x) * 0x32))
|
|
#define LTC2992_SENSE_MAX_THRESH(x) (LTC2992_SENSE1_MAX_THRESH + ((x) * 0x32))
|
|
#define LTC2992_SENSE_MIN_THRESH(x) (LTC2992_SENSE1_MIN_THRESH + ((x) * 0x32))
|
|
#define LTC2992_POWER_FAULT(x) (LTC2992_FAULT1 + ((x) * 0x32))
|
|
#define LTC2992_SENSE_FAULT(x) (LTC2992_FAULT1 + ((x) * 0x32))
|
|
#define LTC2992_DSENSE_FAULT(x) (LTC2992_FAULT1 + ((x) * 0x32))
|
|
|
|
/* CTRLB register bitfields */
|
|
#define LTC2992_RESET_HISTORY BIT(3)
|
|
|
|
/* FAULT1 FAULT2 registers common bitfields */
|
|
#define LTC2992_POWER_FAULT_MSK(x) (BIT(6) << (x))
|
|
#define LTC2992_DSENSE_FAULT_MSK(x) (BIT(4) << (x))
|
|
#define LTC2992_SENSE_FAULT_MSK(x) (BIT(2) << (x))
|
|
|
|
/* FAULT1 bitfields */
|
|
#define LTC2992_GPIO1_FAULT_MSK(x) (BIT(0) << (x))
|
|
|
|
/* FAULT2 bitfields */
|
|
#define LTC2992_GPIO2_FAULT_MSK(x) (BIT(0) << (x))
|
|
|
|
/* FAULT3 bitfields */
|
|
#define LTC2992_GPIO3_FAULT_MSK(x) (BIT(6) << (x))
|
|
#define LTC2992_GPIO4_FAULT_MSK(x) (BIT(4) << (x))
|
|
|
|
#define LTC2992_IADC_NANOV_LSB 12500
|
|
#define LTC2992_VADC_UV_LSB 25000
|
|
#define LTC2992_VADC_GPIO_UV_LSB 500
|
|
|
|
#define LTC2992_GPIO_NR 4
|
|
#define LTC2992_GPIO1_BIT 7
|
|
#define LTC2992_GPIO2_BIT 6
|
|
#define LTC2992_GPIO3_BIT 0
|
|
#define LTC2992_GPIO4_BIT 6
|
|
#define LTC2992_GPIO_BIT(x) (LTC2992_GPIO_NR - (x) - 1)
|
|
|
|
struct ltc2992_state {
|
|
struct i2c_client *client;
|
|
struct gpio_chip gc;
|
|
struct mutex gpio_mutex; /* lock for gpio access */
|
|
const char *gpio_names[LTC2992_GPIO_NR];
|
|
struct regmap *regmap;
|
|
u32 r_sense_uohm[2];
|
|
};
|
|
|
|
struct ltc2992_gpio_regs {
|
|
u8 data;
|
|
u8 max;
|
|
u8 min;
|
|
u8 max_thresh;
|
|
u8 min_thresh;
|
|
u8 alarm;
|
|
u8 min_alarm_msk;
|
|
u8 max_alarm_msk;
|
|
u8 ctrl;
|
|
u8 ctrl_bit;
|
|
};
|
|
|
|
static const struct ltc2992_gpio_regs ltc2992_gpio_addr_map[] = {
|
|
{
|
|
.data = LTC2992_G1,
|
|
.max = LTC2992_G1_MAX,
|
|
.min = LTC2992_G1_MIN,
|
|
.max_thresh = LTC2992_G1_MAX_THRESH,
|
|
.min_thresh = LTC2992_G1_MIN_THRESH,
|
|
.alarm = LTC2992_FAULT1,
|
|
.min_alarm_msk = LTC2992_GPIO1_FAULT_MSK(0),
|
|
.max_alarm_msk = LTC2992_GPIO1_FAULT_MSK(1),
|
|
.ctrl = LTC2992_GPIO_IO_CTRL,
|
|
.ctrl_bit = LTC2992_GPIO1_BIT,
|
|
},
|
|
{
|
|
.data = LTC2992_G2,
|
|
.max = LTC2992_G2_MAX,
|
|
.min = LTC2992_G2_MIN,
|
|
.max_thresh = LTC2992_G2_MAX_THRESH,
|
|
.min_thresh = LTC2992_G2_MIN_THRESH,
|
|
.alarm = LTC2992_FAULT2,
|
|
.min_alarm_msk = LTC2992_GPIO2_FAULT_MSK(0),
|
|
.max_alarm_msk = LTC2992_GPIO2_FAULT_MSK(1),
|
|
.ctrl = LTC2992_GPIO_IO_CTRL,
|
|
.ctrl_bit = LTC2992_GPIO2_BIT,
|
|
},
|
|
{
|
|
.data = LTC2992_G3,
|
|
.max = LTC2992_G3_MAX,
|
|
.min = LTC2992_G3_MIN,
|
|
.max_thresh = LTC2992_G3_MAX_THRESH,
|
|
.min_thresh = LTC2992_G3_MIN_THRESH,
|
|
.alarm = LTC2992_FAULT3,
|
|
.min_alarm_msk = LTC2992_GPIO3_FAULT_MSK(0),
|
|
.max_alarm_msk = LTC2992_GPIO3_FAULT_MSK(1),
|
|
.ctrl = LTC2992_GPIO_IO_CTRL,
|
|
.ctrl_bit = LTC2992_GPIO3_BIT,
|
|
},
|
|
{
|
|
.data = LTC2992_G4,
|
|
.max = LTC2992_G4_MAX,
|
|
.min = LTC2992_G4_MIN,
|
|
.max_thresh = LTC2992_G4_MAX_THRESH,
|
|
.min_thresh = LTC2992_G4_MIN_THRESH,
|
|
.alarm = LTC2992_FAULT3,
|
|
.min_alarm_msk = LTC2992_GPIO4_FAULT_MSK(0),
|
|
.max_alarm_msk = LTC2992_GPIO4_FAULT_MSK(1),
|
|
.ctrl = LTC2992_GPIO_CTRL,
|
|
.ctrl_bit = LTC2992_GPIO4_BIT,
|
|
},
|
|
};
|
|
|
|
static const char *ltc2992_gpio_names[LTC2992_GPIO_NR] = {
|
|
"GPIO1", "GPIO2", "GPIO3", "GPIO4",
|
|
};
|
|
|
|
static int ltc2992_read_reg(struct ltc2992_state *st, u8 addr, const u8 reg_len)
|
|
{
|
|
u8 regvals[4];
|
|
int val;
|
|
int ret;
|
|
int i;
|
|
|
|
ret = regmap_bulk_read(st->regmap, addr, regvals, reg_len);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = 0;
|
|
for (i = 0; i < reg_len; i++)
|
|
val |= regvals[reg_len - i - 1] << (i * 8);
|
|
|
|
return val;
|
|
}
|
|
|
|
static int ltc2992_write_reg(struct ltc2992_state *st, u8 addr, const u8 reg_len, u32 val)
|
|
{
|
|
u8 regvals[4];
|
|
int i;
|
|
|
|
for (i = 0; i < reg_len; i++)
|
|
regvals[reg_len - i - 1] = (val >> (i * 8)) & 0xFF;
|
|
|
|
return regmap_bulk_write(st->regmap, addr, regvals, reg_len);
|
|
}
|
|
|
|
static int ltc2992_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct ltc2992_state *st = gpiochip_get_data(chip);
|
|
unsigned long gpio_status;
|
|
int reg;
|
|
|
|
mutex_lock(&st->gpio_mutex);
|
|
reg = ltc2992_read_reg(st, LTC2992_GPIO_STATUS, 1);
|
|
mutex_unlock(&st->gpio_mutex);
|
|
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
gpio_status = reg;
|
|
|
|
return !test_bit(LTC2992_GPIO_BIT(offset), &gpio_status);
|
|
}
|
|
|
|
static int ltc2992_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
|
|
unsigned long *bits)
|
|
{
|
|
struct ltc2992_state *st = gpiochip_get_data(chip);
|
|
unsigned long gpio_status;
|
|
unsigned int gpio_nr;
|
|
int reg;
|
|
|
|
mutex_lock(&st->gpio_mutex);
|
|
reg = ltc2992_read_reg(st, LTC2992_GPIO_STATUS, 1);
|
|
mutex_unlock(&st->gpio_mutex);
|
|
|
|
if (reg < 0)
|
|
return reg;
|
|
|
|
gpio_status = reg;
|
|
|
|
for_each_set_bit(gpio_nr, mask, LTC2992_GPIO_NR) {
|
|
if (test_bit(LTC2992_GPIO_BIT(gpio_nr), &gpio_status))
|
|
set_bit(gpio_nr, bits);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ltc2992_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
|
|
{
|
|
struct ltc2992_state *st = gpiochip_get_data(chip);
|
|
unsigned long gpio_ctrl;
|
|
int reg;
|
|
|
|
mutex_lock(&st->gpio_mutex);
|
|
reg = ltc2992_read_reg(st, ltc2992_gpio_addr_map[offset].ctrl, 1);
|
|
if (reg < 0) {
|
|
mutex_unlock(&st->gpio_mutex);
|
|
return;
|
|
}
|
|
|
|
gpio_ctrl = reg;
|
|
assign_bit(ltc2992_gpio_addr_map[offset].ctrl_bit, &gpio_ctrl, value);
|
|
|
|
ltc2992_write_reg(st, ltc2992_gpio_addr_map[offset].ctrl, 1, gpio_ctrl);
|
|
mutex_unlock(&st->gpio_mutex);
|
|
}
|
|
|
|
static void ltc2992_gpio_set_multiple(struct gpio_chip *chip, unsigned long *mask,
|
|
unsigned long *bits)
|
|
{
|
|
struct ltc2992_state *st = gpiochip_get_data(chip);
|
|
unsigned long gpio_ctrl_io = 0;
|
|
unsigned long gpio_ctrl = 0;
|
|
unsigned int gpio_nr;
|
|
|
|
for_each_set_bit(gpio_nr, mask, LTC2992_GPIO_NR) {
|
|
if (gpio_nr < 3)
|
|
assign_bit(ltc2992_gpio_addr_map[gpio_nr].ctrl_bit, &gpio_ctrl_io, true);
|
|
|
|
if (gpio_nr == 3)
|
|
assign_bit(ltc2992_gpio_addr_map[gpio_nr].ctrl_bit, &gpio_ctrl, true);
|
|
}
|
|
|
|
mutex_lock(&st->gpio_mutex);
|
|
ltc2992_write_reg(st, LTC2992_GPIO_IO_CTRL, 1, gpio_ctrl_io);
|
|
ltc2992_write_reg(st, LTC2992_GPIO_CTRL, 1, gpio_ctrl);
|
|
mutex_unlock(&st->gpio_mutex);
|
|
}
|
|
|
|
static int ltc2992_config_gpio(struct ltc2992_state *st)
|
|
{
|
|
const char *name = dev_name(&st->client->dev);
|
|
char *gpio_name;
|
|
int ret;
|
|
int i;
|
|
|
|
ret = ltc2992_write_reg(st, LTC2992_GPIO_IO_CTRL, 1, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mutex_init(&st->gpio_mutex);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(st->gpio_names); i++) {
|
|
gpio_name = devm_kasprintf(&st->client->dev, GFP_KERNEL, "ltc2992-%x-%s",
|
|
st->client->addr, ltc2992_gpio_names[i]);
|
|
if (!gpio_name)
|
|
return -ENOMEM;
|
|
|
|
st->gpio_names[i] = gpio_name;
|
|
}
|
|
|
|
st->gc.label = name;
|
|
st->gc.parent = &st->client->dev;
|
|
st->gc.owner = THIS_MODULE;
|
|
st->gc.can_sleep = true;
|
|
st->gc.base = -1;
|
|
st->gc.names = st->gpio_names;
|
|
st->gc.ngpio = ARRAY_SIZE(st->gpio_names);
|
|
st->gc.get = ltc2992_gpio_get;
|
|
st->gc.get_multiple = ltc2992_gpio_get_multiple;
|
|
st->gc.set = ltc2992_gpio_set;
|
|
st->gc.set_multiple = ltc2992_gpio_set_multiple;
|
|
|
|
ret = devm_gpiochip_add_data(&st->client->dev, &st->gc, st);
|
|
if (ret)
|
|
dev_err(&st->client->dev, "GPIO registering failed (%d)\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static umode_t ltc2992_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr,
|
|
int channel)
|
|
{
|
|
const struct ltc2992_state *st = data;
|
|
|
|
switch (type) {
|
|
case hwmon_chip:
|
|
switch (attr) {
|
|
case hwmon_chip_in_reset_history:
|
|
return 0200;
|
|
}
|
|
break;
|
|
case hwmon_in:
|
|
switch (attr) {
|
|
case hwmon_in_input:
|
|
case hwmon_in_lowest:
|
|
case hwmon_in_highest:
|
|
case hwmon_in_min_alarm:
|
|
case hwmon_in_max_alarm:
|
|
return 0444;
|
|
case hwmon_in_min:
|
|
case hwmon_in_max:
|
|
return 0644;
|
|
}
|
|
break;
|
|
case hwmon_curr:
|
|
switch (attr) {
|
|
case hwmon_curr_input:
|
|
case hwmon_curr_lowest:
|
|
case hwmon_curr_highest:
|
|
case hwmon_curr_min_alarm:
|
|
case hwmon_curr_max_alarm:
|
|
if (st->r_sense_uohm[channel])
|
|
return 0444;
|
|
break;
|
|
case hwmon_curr_min:
|
|
case hwmon_curr_max:
|
|
if (st->r_sense_uohm[channel])
|
|
return 0644;
|
|
break;
|
|
}
|
|
break;
|
|
case hwmon_power:
|
|
switch (attr) {
|
|
case hwmon_power_input:
|
|
case hwmon_power_input_lowest:
|
|
case hwmon_power_input_highest:
|
|
case hwmon_power_min_alarm:
|
|
case hwmon_power_max_alarm:
|
|
if (st->r_sense_uohm[channel])
|
|
return 0444;
|
|
break;
|
|
case hwmon_power_min:
|
|
case hwmon_power_max:
|
|
if (st->r_sense_uohm[channel])
|
|
return 0644;
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ltc2992_get_voltage(struct ltc2992_state *st, u32 reg, u32 scale, long *val)
|
|
{
|
|
int reg_val;
|
|
|
|
reg_val = ltc2992_read_reg(st, reg, 2);
|
|
if (reg_val < 0)
|
|
return reg_val;
|
|
|
|
reg_val = reg_val >> 4;
|
|
*val = DIV_ROUND_CLOSEST(reg_val * scale, 1000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ltc2992_set_voltage(struct ltc2992_state *st, u32 reg, u32 scale, long val)
|
|
{
|
|
val = DIV_ROUND_CLOSEST(val * 1000, scale);
|
|
val = val << 4;
|
|
|
|
return ltc2992_write_reg(st, reg, 2, val);
|
|
}
|
|
|
|
static int ltc2992_read_gpio_alarm(struct ltc2992_state *st, int nr_gpio, u32 attr, long *val)
|
|
{
|
|
int reg_val;
|
|
u32 mask;
|
|
|
|
if (attr == hwmon_in_max_alarm)
|
|
mask = ltc2992_gpio_addr_map[nr_gpio].max_alarm_msk;
|
|
else
|
|
mask = ltc2992_gpio_addr_map[nr_gpio].min_alarm_msk;
|
|
|
|
reg_val = ltc2992_read_reg(st, ltc2992_gpio_addr_map[nr_gpio].alarm, 1);
|
|
if (reg_val < 0)
|
|
return reg_val;
|
|
|
|
*val = !!(reg_val & mask);
|
|
reg_val &= ~mask;
|
|
|
|
return ltc2992_write_reg(st, ltc2992_gpio_addr_map[nr_gpio].alarm, 1, reg_val);
|
|
}
|
|
|
|
static int ltc2992_read_gpios_in(struct device *dev, u32 attr, int nr_gpio, long *val)
|
|
{
|
|
struct ltc2992_state *st = dev_get_drvdata(dev);
|
|
u32 reg;
|
|
|
|
switch (attr) {
|
|
case hwmon_in_input:
|
|
reg = ltc2992_gpio_addr_map[nr_gpio].data;
|
|
break;
|
|
case hwmon_in_lowest:
|
|
reg = ltc2992_gpio_addr_map[nr_gpio].min;
|
|
break;
|
|
case hwmon_in_highest:
|
|
reg = ltc2992_gpio_addr_map[nr_gpio].max;
|
|
break;
|
|
case hwmon_in_min:
|
|
reg = ltc2992_gpio_addr_map[nr_gpio].min_thresh;
|
|
break;
|
|
case hwmon_in_max:
|
|
reg = ltc2992_gpio_addr_map[nr_gpio].max_thresh;
|
|
break;
|
|
case hwmon_in_min_alarm:
|
|
case hwmon_in_max_alarm:
|
|
return ltc2992_read_gpio_alarm(st, nr_gpio, attr, val);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return ltc2992_get_voltage(st, reg, LTC2992_VADC_GPIO_UV_LSB, val);
|
|
}
|
|
|
|
static int ltc2992_read_in_alarm(struct ltc2992_state *st, int channel, long *val, u32 attr)
|
|
{
|
|
int reg_val;
|
|
u32 mask;
|
|
|
|
if (attr == hwmon_in_max_alarm)
|
|
mask = LTC2992_SENSE_FAULT_MSK(1);
|
|
else
|
|
mask = LTC2992_SENSE_FAULT_MSK(0);
|
|
|
|
reg_val = ltc2992_read_reg(st, LTC2992_SENSE_FAULT(channel), 1);
|
|
if (reg_val < 0)
|
|
return reg_val;
|
|
|
|
*val = !!(reg_val & mask);
|
|
reg_val &= ~mask;
|
|
|
|
return ltc2992_write_reg(st, LTC2992_SENSE_FAULT(channel), 1, reg_val);
|
|
}
|
|
|
|
static int ltc2992_read_in(struct device *dev, u32 attr, int channel, long *val)
|
|
{
|
|
struct ltc2992_state *st = dev_get_drvdata(dev);
|
|
u32 reg;
|
|
|
|
if (channel > 1)
|
|
return ltc2992_read_gpios_in(dev, attr, channel - 2, val);
|
|
|
|
switch (attr) {
|
|
case hwmon_in_input:
|
|
reg = LTC2992_SENSE(channel);
|
|
break;
|
|
case hwmon_in_lowest:
|
|
reg = LTC2992_SENSE_MIN(channel);
|
|
break;
|
|
case hwmon_in_highest:
|
|
reg = LTC2992_SENSE_MAX(channel);
|
|
break;
|
|
case hwmon_in_min:
|
|
reg = LTC2992_SENSE_MIN_THRESH(channel);
|
|
break;
|
|
case hwmon_in_max:
|
|
reg = LTC2992_SENSE_MAX_THRESH(channel);
|
|
break;
|
|
case hwmon_in_min_alarm:
|
|
case hwmon_in_max_alarm:
|
|
return ltc2992_read_in_alarm(st, channel, val, attr);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return ltc2992_get_voltage(st, reg, LTC2992_VADC_UV_LSB, val);
|
|
}
|
|
|
|
static int ltc2992_get_current(struct ltc2992_state *st, u32 reg, u32 channel, long *val)
|
|
{
|
|
int reg_val;
|
|
|
|
reg_val = ltc2992_read_reg(st, reg, 2);
|
|
if (reg_val < 0)
|
|
return reg_val;
|
|
|
|
reg_val = reg_val >> 4;
|
|
*val = DIV_ROUND_CLOSEST(reg_val * LTC2992_IADC_NANOV_LSB, st->r_sense_uohm[channel]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ltc2992_set_current(struct ltc2992_state *st, u32 reg, u32 channel, long val)
|
|
{
|
|
u32 reg_val;
|
|
|
|
reg_val = DIV_ROUND_CLOSEST(val * st->r_sense_uohm[channel], LTC2992_IADC_NANOV_LSB);
|
|
reg_val = reg_val << 4;
|
|
|
|
return ltc2992_write_reg(st, reg, 2, reg_val);
|
|
}
|
|
|
|
static int ltc2992_read_curr_alarm(struct ltc2992_state *st, int channel, long *val, u32 attr)
|
|
{
|
|
int reg_val;
|
|
u32 mask;
|
|
|
|
if (attr == hwmon_curr_max_alarm)
|
|
mask = LTC2992_DSENSE_FAULT_MSK(1);
|
|
else
|
|
mask = LTC2992_DSENSE_FAULT_MSK(0);
|
|
|
|
reg_val = ltc2992_read_reg(st, LTC2992_DSENSE_FAULT(channel), 1);
|
|
if (reg_val < 0)
|
|
return reg_val;
|
|
|
|
*val = !!(reg_val & mask);
|
|
|
|
reg_val &= ~mask;
|
|
return ltc2992_write_reg(st, LTC2992_DSENSE_FAULT(channel), 1, reg_val);
|
|
}
|
|
|
|
static int ltc2992_read_curr(struct device *dev, u32 attr, int channel, long *val)
|
|
{
|
|
struct ltc2992_state *st = dev_get_drvdata(dev);
|
|
u32 reg;
|
|
|
|
switch (attr) {
|
|
case hwmon_curr_input:
|
|
reg = LTC2992_DSENSE(channel);
|
|
break;
|
|
case hwmon_curr_lowest:
|
|
reg = LTC2992_DSENSE_MIN(channel);
|
|
break;
|
|
case hwmon_curr_highest:
|
|
reg = LTC2992_DSENSE_MAX(channel);
|
|
break;
|
|
case hwmon_curr_min:
|
|
reg = LTC2992_DSENSE_MIN_THRESH(channel);
|
|
break;
|
|
case hwmon_curr_max:
|
|
reg = LTC2992_DSENSE_MAX_THRESH(channel);
|
|
break;
|
|
case hwmon_curr_min_alarm:
|
|
case hwmon_curr_max_alarm:
|
|
return ltc2992_read_curr_alarm(st, channel, val, attr);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return ltc2992_get_current(st, reg, channel, val);
|
|
}
|
|
|
|
static int ltc2992_get_power(struct ltc2992_state *st, u32 reg, u32 channel, long *val)
|
|
{
|
|
int reg_val;
|
|
|
|
reg_val = ltc2992_read_reg(st, reg, 3);
|
|
if (reg_val < 0)
|
|
return reg_val;
|
|
|
|
*val = mul_u64_u32_div(reg_val, LTC2992_VADC_UV_LSB * LTC2992_IADC_NANOV_LSB,
|
|
st->r_sense_uohm[channel] * 1000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ltc2992_set_power(struct ltc2992_state *st, u32 reg, u32 channel, long val)
|
|
{
|
|
u32 reg_val;
|
|
|
|
reg_val = mul_u64_u32_div(val, st->r_sense_uohm[channel] * 1000,
|
|
LTC2992_VADC_UV_LSB * LTC2992_IADC_NANOV_LSB);
|
|
|
|
return ltc2992_write_reg(st, reg, 3, reg_val);
|
|
}
|
|
|
|
static int ltc2992_read_power_alarm(struct ltc2992_state *st, int channel, long *val, u32 attr)
|
|
{
|
|
int reg_val;
|
|
u32 mask;
|
|
|
|
if (attr == hwmon_power_max_alarm)
|
|
mask = LTC2992_POWER_FAULT_MSK(1);
|
|
else
|
|
mask = LTC2992_POWER_FAULT_MSK(0);
|
|
|
|
reg_val = ltc2992_read_reg(st, LTC2992_POWER_FAULT(channel), 1);
|
|
if (reg_val < 0)
|
|
return reg_val;
|
|
|
|
*val = !!(reg_val & mask);
|
|
reg_val &= ~mask;
|
|
|
|
return ltc2992_write_reg(st, LTC2992_POWER_FAULT(channel), 1, reg_val);
|
|
}
|
|
|
|
static int ltc2992_read_power(struct device *dev, u32 attr, int channel, long *val)
|
|
{
|
|
struct ltc2992_state *st = dev_get_drvdata(dev);
|
|
u32 reg;
|
|
|
|
switch (attr) {
|
|
case hwmon_power_input:
|
|
reg = LTC2992_POWER(channel);
|
|
break;
|
|
case hwmon_power_input_lowest:
|
|
reg = LTC2992_POWER_MIN(channel);
|
|
break;
|
|
case hwmon_power_input_highest:
|
|
reg = LTC2992_POWER_MAX(channel);
|
|
break;
|
|
case hwmon_power_min:
|
|
reg = LTC2992_POWER_MIN_THRESH(channel);
|
|
break;
|
|
case hwmon_power_max:
|
|
reg = LTC2992_POWER_MAX_THRESH(channel);
|
|
break;
|
|
case hwmon_power_min_alarm:
|
|
case hwmon_power_max_alarm:
|
|
return ltc2992_read_power_alarm(st, channel, val, attr);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return ltc2992_get_power(st, reg, channel, val);
|
|
}
|
|
|
|
static int ltc2992_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel,
|
|
long *val)
|
|
{
|
|
switch (type) {
|
|
case hwmon_in:
|
|
return ltc2992_read_in(dev, attr, channel, val);
|
|
case hwmon_curr:
|
|
return ltc2992_read_curr(dev, attr, channel, val);
|
|
case hwmon_power:
|
|
return ltc2992_read_power(dev, attr, channel, val);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int ltc2992_write_curr(struct device *dev, u32 attr, int channel, long val)
|
|
{
|
|
struct ltc2992_state *st = dev_get_drvdata(dev);
|
|
u32 reg;
|
|
|
|
switch (attr) {
|
|
case hwmon_curr_min:
|
|
reg = LTC2992_DSENSE_MIN_THRESH(channel);
|
|
break;
|
|
case hwmon_curr_max:
|
|
reg = LTC2992_DSENSE_MAX_THRESH(channel);
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return ltc2992_set_current(st, reg, channel, val);
|
|
}
|
|
|
|
static int ltc2992_write_gpios_in(struct device *dev, u32 attr, int nr_gpio, long val)
|
|
{
|
|
struct ltc2992_state *st = dev_get_drvdata(dev);
|
|
u32 reg;
|
|
|
|
switch (attr) {
|
|
case hwmon_in_min:
|
|
reg = ltc2992_gpio_addr_map[nr_gpio].min_thresh;
|
|
break;
|
|
case hwmon_in_max:
|
|
reg = ltc2992_gpio_addr_map[nr_gpio].max_thresh;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return ltc2992_set_voltage(st, reg, LTC2992_VADC_GPIO_UV_LSB, val);
|
|
}
|
|
|
|
static int ltc2992_write_in(struct device *dev, u32 attr, int channel, long val)
|
|
{
|
|
struct ltc2992_state *st = dev_get_drvdata(dev);
|
|
u32 reg;
|
|
|
|
if (channel > 1)
|
|
return ltc2992_write_gpios_in(dev, attr, channel - 2, val);
|
|
|
|
switch (attr) {
|
|
case hwmon_in_min:
|
|
reg = LTC2992_SENSE_MIN_THRESH(channel);
|
|
break;
|
|
case hwmon_in_max:
|
|
reg = LTC2992_SENSE_MAX_THRESH(channel);
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return ltc2992_set_voltage(st, reg, LTC2992_VADC_UV_LSB, val);
|
|
}
|
|
|
|
static int ltc2992_write_power(struct device *dev, u32 attr, int channel, long val)
|
|
{
|
|
struct ltc2992_state *st = dev_get_drvdata(dev);
|
|
u32 reg;
|
|
|
|
switch (attr) {
|
|
case hwmon_power_min:
|
|
reg = LTC2992_POWER_MIN_THRESH(channel);
|
|
break;
|
|
case hwmon_power_max:
|
|
reg = LTC2992_POWER_MAX_THRESH(channel);
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return ltc2992_set_power(st, reg, channel, val);
|
|
}
|
|
|
|
static int ltc2992_write_chip(struct device *dev, u32 attr, int channel, long val)
|
|
{
|
|
struct ltc2992_state *st = dev_get_drvdata(dev);
|
|
|
|
switch (attr) {
|
|
case hwmon_chip_in_reset_history:
|
|
return regmap_update_bits(st->regmap, LTC2992_CTRLB, LTC2992_RESET_HISTORY,
|
|
LTC2992_RESET_HISTORY);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static int ltc2992_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel,
|
|
long val)
|
|
{
|
|
switch (type) {
|
|
case hwmon_chip:
|
|
return ltc2992_write_chip(dev, attr, channel, val);
|
|
case hwmon_in:
|
|
return ltc2992_write_in(dev, attr, channel, val);
|
|
case hwmon_curr:
|
|
return ltc2992_write_curr(dev, attr, channel, val);
|
|
case hwmon_power:
|
|
return ltc2992_write_power(dev, attr, channel, val);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static const struct hwmon_ops ltc2992_hwmon_ops = {
|
|
.is_visible = ltc2992_is_visible,
|
|
.read = ltc2992_read,
|
|
.write = ltc2992_write,
|
|
};
|
|
|
|
static const struct hwmon_channel_info * const ltc2992_info[] = {
|
|
HWMON_CHANNEL_INFO(chip,
|
|
HWMON_C_IN_RESET_HISTORY),
|
|
HWMON_CHANNEL_INFO(in,
|
|
HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN |
|
|
HWMON_I_MAX | HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM,
|
|
HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN |
|
|
HWMON_I_MAX | HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM,
|
|
HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN |
|
|
HWMON_I_MAX | HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM,
|
|
HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN |
|
|
HWMON_I_MAX | HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM,
|
|
HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN |
|
|
HWMON_I_MAX | HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM,
|
|
HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST | HWMON_I_MIN |
|
|
HWMON_I_MAX | HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM),
|
|
HWMON_CHANNEL_INFO(curr,
|
|
HWMON_C_INPUT | HWMON_C_LOWEST | HWMON_C_HIGHEST | HWMON_C_MIN |
|
|
HWMON_C_MAX | HWMON_C_MIN_ALARM | HWMON_C_MAX_ALARM,
|
|
HWMON_C_INPUT | HWMON_C_LOWEST | HWMON_C_HIGHEST | HWMON_C_MIN |
|
|
HWMON_C_MAX | HWMON_C_MIN_ALARM | HWMON_C_MAX_ALARM),
|
|
HWMON_CHANNEL_INFO(power,
|
|
HWMON_P_INPUT | HWMON_P_INPUT_LOWEST | HWMON_P_INPUT_HIGHEST |
|
|
HWMON_P_MIN | HWMON_P_MAX | HWMON_P_MIN_ALARM | HWMON_P_MAX_ALARM,
|
|
HWMON_P_INPUT | HWMON_P_INPUT_LOWEST | HWMON_P_INPUT_HIGHEST |
|
|
HWMON_P_MIN | HWMON_P_MAX | HWMON_P_MIN_ALARM | HWMON_P_MAX_ALARM),
|
|
NULL
|
|
};
|
|
|
|
static const struct hwmon_chip_info ltc2992_chip_info = {
|
|
.ops = <c2992_hwmon_ops,
|
|
.info = ltc2992_info,
|
|
};
|
|
|
|
static const struct regmap_config ltc2992_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = 0xE8,
|
|
};
|
|
|
|
static int ltc2992_parse_dt(struct ltc2992_state *st)
|
|
{
|
|
struct fwnode_handle *fwnode;
|
|
struct fwnode_handle *child;
|
|
u32 addr;
|
|
u32 val;
|
|
int ret;
|
|
|
|
fwnode = dev_fwnode(&st->client->dev);
|
|
|
|
fwnode_for_each_available_child_node(fwnode, child) {
|
|
ret = fwnode_property_read_u32(child, "reg", &addr);
|
|
if (ret < 0) {
|
|
fwnode_handle_put(child);
|
|
return ret;
|
|
}
|
|
|
|
if (addr > 1) {
|
|
fwnode_handle_put(child);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = fwnode_property_read_u32(child, "shunt-resistor-micro-ohms", &val);
|
|
if (!ret)
|
|
st->r_sense_uohm[addr] = val;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ltc2992_i2c_probe(struct i2c_client *client)
|
|
{
|
|
struct device *hwmon_dev;
|
|
struct ltc2992_state *st;
|
|
int ret;
|
|
|
|
st = devm_kzalloc(&client->dev, sizeof(*st), GFP_KERNEL);
|
|
if (!st)
|
|
return -ENOMEM;
|
|
|
|
st->client = client;
|
|
st->regmap = devm_regmap_init_i2c(client, <c2992_regmap_config);
|
|
if (IS_ERR(st->regmap))
|
|
return PTR_ERR(st->regmap);
|
|
|
|
ret = ltc2992_parse_dt(st);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ltc2992_config_gpio(st);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_info(&client->dev, client->name, st,
|
|
<c2992_chip_info, NULL);
|
|
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
static const struct of_device_id ltc2992_of_match[] = {
|
|
{ .compatible = "adi,ltc2992" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ltc2992_of_match);
|
|
|
|
static const struct i2c_device_id ltc2992_i2c_id[] = {
|
|
{"ltc2992", 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ltc2992_i2c_id);
|
|
|
|
static struct i2c_driver ltc2992_i2c_driver = {
|
|
.driver = {
|
|
.name = "ltc2992",
|
|
.of_match_table = ltc2992_of_match,
|
|
},
|
|
.probe = ltc2992_i2c_probe,
|
|
.id_table = ltc2992_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(ltc2992_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Alexandru Tachici <alexandru.tachici@analog.com>");
|
|
MODULE_DESCRIPTION("Hwmon driver for Linear Technology 2992");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|