490 lines
12 KiB
C
490 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* DRV2667 haptics driver family
|
|
*
|
|
* Author: Dan Murphy <dmurphy@ti.com>
|
|
*
|
|
* Copyright: (C) 2014 Texas Instruments, Inc.
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/input.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
/* Contol registers */
|
|
#define DRV2667_STATUS 0x00
|
|
#define DRV2667_CTRL_1 0x01
|
|
#define DRV2667_CTRL_2 0x02
|
|
/* Waveform sequencer */
|
|
#define DRV2667_WV_SEQ_0 0x03
|
|
#define DRV2667_WV_SEQ_1 0x04
|
|
#define DRV2667_WV_SEQ_2 0x05
|
|
#define DRV2667_WV_SEQ_3 0x06
|
|
#define DRV2667_WV_SEQ_4 0x07
|
|
#define DRV2667_WV_SEQ_5 0x08
|
|
#define DRV2667_WV_SEQ_6 0x09
|
|
#define DRV2667_WV_SEQ_7 0x0A
|
|
#define DRV2667_FIFO 0x0B
|
|
#define DRV2667_PAGE 0xFF
|
|
#define DRV2667_MAX_REG DRV2667_PAGE
|
|
|
|
#define DRV2667_PAGE_0 0x00
|
|
#define DRV2667_PAGE_1 0x01
|
|
#define DRV2667_PAGE_2 0x02
|
|
#define DRV2667_PAGE_3 0x03
|
|
#define DRV2667_PAGE_4 0x04
|
|
#define DRV2667_PAGE_5 0x05
|
|
#define DRV2667_PAGE_6 0x06
|
|
#define DRV2667_PAGE_7 0x07
|
|
#define DRV2667_PAGE_8 0x08
|
|
|
|
/* RAM fields */
|
|
#define DRV2667_RAM_HDR_SZ 0x0
|
|
/* RAM Header addresses */
|
|
#define DRV2667_RAM_START_HI 0x01
|
|
#define DRV2667_RAM_START_LO 0x02
|
|
#define DRV2667_RAM_STOP_HI 0x03
|
|
#define DRV2667_RAM_STOP_LO 0x04
|
|
#define DRV2667_RAM_REPEAT_CT 0x05
|
|
/* RAM data addresses */
|
|
#define DRV2667_RAM_AMP 0x06
|
|
#define DRV2667_RAM_FREQ 0x07
|
|
#define DRV2667_RAM_DURATION 0x08
|
|
#define DRV2667_RAM_ENVELOPE 0x09
|
|
|
|
/* Control 1 Register */
|
|
#define DRV2667_25_VPP_GAIN 0x00
|
|
#define DRV2667_50_VPP_GAIN 0x01
|
|
#define DRV2667_75_VPP_GAIN 0x02
|
|
#define DRV2667_100_VPP_GAIN 0x03
|
|
#define DRV2667_DIGITAL_IN 0xfc
|
|
#define DRV2667_ANALOG_IN (1 << 2)
|
|
|
|
/* Control 2 Register */
|
|
#define DRV2667_GO (1 << 0)
|
|
#define DRV2667_STANDBY (1 << 6)
|
|
#define DRV2667_DEV_RST (1 << 7)
|
|
|
|
/* RAM Envelope settings */
|
|
#define DRV2667_NO_ENV 0x00
|
|
#define DRV2667_32_MS_ENV 0x01
|
|
#define DRV2667_64_MS_ENV 0x02
|
|
#define DRV2667_96_MS_ENV 0x03
|
|
#define DRV2667_128_MS_ENV 0x04
|
|
#define DRV2667_160_MS_ENV 0x05
|
|
#define DRV2667_192_MS_ENV 0x06
|
|
#define DRV2667_224_MS_ENV 0x07
|
|
#define DRV2667_256_MS_ENV 0x08
|
|
#define DRV2667_512_MS_ENV 0x09
|
|
#define DRV2667_768_MS_ENV 0x0a
|
|
#define DRV2667_1024_MS_ENV 0x0b
|
|
#define DRV2667_1280_MS_ENV 0x0c
|
|
#define DRV2667_1536_MS_ENV 0x0d
|
|
#define DRV2667_1792_MS_ENV 0x0e
|
|
#define DRV2667_2048_MS_ENV 0x0f
|
|
|
|
/**
|
|
* struct drv2667_data -
|
|
* @input_dev: Pointer to the input device
|
|
* @client: Pointer to the I2C client
|
|
* @regmap: Register map of the device
|
|
* @work: Work item used to off load the enable/disable of the vibration
|
|
* @regulator: Pointer to the regulator for the IC
|
|
* @page: Page number
|
|
* @magnitude: Magnitude of the vibration event
|
|
* @frequency: Frequency of the vibration event
|
|
**/
|
|
struct drv2667_data {
|
|
struct input_dev *input_dev;
|
|
struct i2c_client *client;
|
|
struct regmap *regmap;
|
|
struct work_struct work;
|
|
struct regulator *regulator;
|
|
u32 page;
|
|
u32 magnitude;
|
|
u32 frequency;
|
|
};
|
|
|
|
static const struct reg_default drv2667_reg_defs[] = {
|
|
{ DRV2667_STATUS, 0x02 },
|
|
{ DRV2667_CTRL_1, 0x28 },
|
|
{ DRV2667_CTRL_2, 0x40 },
|
|
{ DRV2667_WV_SEQ_0, 0x00 },
|
|
{ DRV2667_WV_SEQ_1, 0x00 },
|
|
{ DRV2667_WV_SEQ_2, 0x00 },
|
|
{ DRV2667_WV_SEQ_3, 0x00 },
|
|
{ DRV2667_WV_SEQ_4, 0x00 },
|
|
{ DRV2667_WV_SEQ_5, 0x00 },
|
|
{ DRV2667_WV_SEQ_6, 0x00 },
|
|
{ DRV2667_WV_SEQ_7, 0x00 },
|
|
{ DRV2667_FIFO, 0x00 },
|
|
{ DRV2667_PAGE, 0x00 },
|
|
};
|
|
|
|
static int drv2667_set_waveform_freq(struct drv2667_data *haptics)
|
|
{
|
|
unsigned int read_buf;
|
|
int freq;
|
|
int error;
|
|
|
|
/* Per the data sheet:
|
|
* Sinusoid Frequency (Hz) = 7.8125 x Frequency
|
|
*/
|
|
freq = (haptics->frequency * 1000) / 78125;
|
|
if (freq <= 0) {
|
|
dev_err(&haptics->client->dev,
|
|
"ERROR: Frequency calculated to %i\n", freq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
error = regmap_read(haptics->regmap, DRV2667_PAGE, &read_buf);
|
|
if (error) {
|
|
dev_err(&haptics->client->dev,
|
|
"Failed to read the page number: %d\n", error);
|
|
return -EIO;
|
|
}
|
|
|
|
if (read_buf == DRV2667_PAGE_0 ||
|
|
haptics->page != read_buf) {
|
|
error = regmap_write(haptics->regmap,
|
|
DRV2667_PAGE, haptics->page);
|
|
if (error) {
|
|
dev_err(&haptics->client->dev,
|
|
"Failed to set the page: %d\n", error);
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
error = regmap_write(haptics->regmap, DRV2667_RAM_FREQ, freq);
|
|
if (error)
|
|
dev_err(&haptics->client->dev,
|
|
"Failed to set the frequency: %d\n", error);
|
|
|
|
/* Reset back to original page */
|
|
if (read_buf == DRV2667_PAGE_0 ||
|
|
haptics->page != read_buf) {
|
|
error = regmap_write(haptics->regmap, DRV2667_PAGE, read_buf);
|
|
if (error) {
|
|
dev_err(&haptics->client->dev,
|
|
"Failed to set the page: %d\n", error);
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
static void drv2667_worker(struct work_struct *work)
|
|
{
|
|
struct drv2667_data *haptics = container_of(work, struct drv2667_data, work);
|
|
int error;
|
|
|
|
if (haptics->magnitude) {
|
|
error = regmap_write(haptics->regmap,
|
|
DRV2667_PAGE, haptics->page);
|
|
if (error) {
|
|
dev_err(&haptics->client->dev,
|
|
"Failed to set the page: %d\n", error);
|
|
return;
|
|
}
|
|
|
|
error = regmap_write(haptics->regmap, DRV2667_RAM_AMP,
|
|
haptics->magnitude);
|
|
if (error) {
|
|
dev_err(&haptics->client->dev,
|
|
"Failed to set the amplitude: %d\n", error);
|
|
return;
|
|
}
|
|
|
|
error = regmap_write(haptics->regmap,
|
|
DRV2667_PAGE, DRV2667_PAGE_0);
|
|
if (error) {
|
|
dev_err(&haptics->client->dev,
|
|
"Failed to set the page: %d\n", error);
|
|
return;
|
|
}
|
|
|
|
error = regmap_write(haptics->regmap,
|
|
DRV2667_CTRL_2, DRV2667_GO);
|
|
if (error) {
|
|
dev_err(&haptics->client->dev,
|
|
"Failed to set the GO bit: %d\n", error);
|
|
}
|
|
} else {
|
|
error = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
|
|
DRV2667_GO, 0);
|
|
if (error) {
|
|
dev_err(&haptics->client->dev,
|
|
"Failed to unset the GO bit: %d\n", error);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int drv2667_haptics_play(struct input_dev *input, void *data,
|
|
struct ff_effect *effect)
|
|
{
|
|
struct drv2667_data *haptics = input_get_drvdata(input);
|
|
|
|
if (effect->u.rumble.strong_magnitude > 0)
|
|
haptics->magnitude = effect->u.rumble.strong_magnitude;
|
|
else if (effect->u.rumble.weak_magnitude > 0)
|
|
haptics->magnitude = effect->u.rumble.weak_magnitude;
|
|
else
|
|
haptics->magnitude = 0;
|
|
|
|
schedule_work(&haptics->work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void drv2667_close(struct input_dev *input)
|
|
{
|
|
struct drv2667_data *haptics = input_get_drvdata(input);
|
|
int error;
|
|
|
|
cancel_work_sync(&haptics->work);
|
|
|
|
error = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
|
|
DRV2667_STANDBY, DRV2667_STANDBY);
|
|
if (error)
|
|
dev_err(&haptics->client->dev,
|
|
"Failed to enter standby mode: %d\n", error);
|
|
}
|
|
|
|
static const struct reg_sequence drv2667_init_regs[] = {
|
|
{ DRV2667_CTRL_2, 0 },
|
|
{ DRV2667_CTRL_1, DRV2667_25_VPP_GAIN },
|
|
{ DRV2667_WV_SEQ_0, 1 },
|
|
{ DRV2667_WV_SEQ_1, 0 }
|
|
};
|
|
|
|
static const struct reg_sequence drv2667_page1_init[] = {
|
|
{ DRV2667_RAM_HDR_SZ, 0x05 },
|
|
{ DRV2667_RAM_START_HI, 0x80 },
|
|
{ DRV2667_RAM_START_LO, 0x06 },
|
|
{ DRV2667_RAM_STOP_HI, 0x00 },
|
|
{ DRV2667_RAM_STOP_LO, 0x09 },
|
|
{ DRV2667_RAM_REPEAT_CT, 0 },
|
|
{ DRV2667_RAM_DURATION, 0x05 },
|
|
{ DRV2667_RAM_ENVELOPE, DRV2667_NO_ENV },
|
|
{ DRV2667_RAM_AMP, 0x60 },
|
|
};
|
|
|
|
static int drv2667_init(struct drv2667_data *haptics)
|
|
{
|
|
int error;
|
|
|
|
/* Set default haptic frequency to 195Hz on Page 1*/
|
|
haptics->frequency = 195;
|
|
haptics->page = DRV2667_PAGE_1;
|
|
|
|
error = regmap_register_patch(haptics->regmap,
|
|
drv2667_init_regs,
|
|
ARRAY_SIZE(drv2667_init_regs));
|
|
if (error) {
|
|
dev_err(&haptics->client->dev,
|
|
"Failed to write init registers: %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
|
|
error = regmap_write(haptics->regmap, DRV2667_PAGE, haptics->page);
|
|
if (error) {
|
|
dev_err(&haptics->client->dev, "Failed to set page: %d\n",
|
|
error);
|
|
goto error_out;
|
|
}
|
|
|
|
error = drv2667_set_waveform_freq(haptics);
|
|
if (error)
|
|
goto error_page;
|
|
|
|
error = regmap_register_patch(haptics->regmap,
|
|
drv2667_page1_init,
|
|
ARRAY_SIZE(drv2667_page1_init));
|
|
if (error) {
|
|
dev_err(&haptics->client->dev,
|
|
"Failed to write page registers: %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
|
|
error = regmap_write(haptics->regmap, DRV2667_PAGE, DRV2667_PAGE_0);
|
|
return error;
|
|
|
|
error_page:
|
|
regmap_write(haptics->regmap, DRV2667_PAGE, DRV2667_PAGE_0);
|
|
error_out:
|
|
return error;
|
|
}
|
|
|
|
static const struct regmap_config drv2667_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = DRV2667_MAX_REG,
|
|
.reg_defaults = drv2667_reg_defs,
|
|
.num_reg_defaults = ARRAY_SIZE(drv2667_reg_defs),
|
|
.cache_type = REGCACHE_NONE,
|
|
};
|
|
|
|
static int drv2667_probe(struct i2c_client *client)
|
|
{
|
|
struct drv2667_data *haptics;
|
|
int error;
|
|
|
|
haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL);
|
|
if (!haptics)
|
|
return -ENOMEM;
|
|
|
|
haptics->regulator = devm_regulator_get(&client->dev, "vbat");
|
|
if (IS_ERR(haptics->regulator)) {
|
|
error = PTR_ERR(haptics->regulator);
|
|
dev_err(&client->dev,
|
|
"unable to get regulator, error: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
haptics->input_dev = devm_input_allocate_device(&client->dev);
|
|
if (!haptics->input_dev) {
|
|
dev_err(&client->dev, "Failed to allocate input device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
haptics->input_dev->name = "drv2667:haptics";
|
|
haptics->input_dev->dev.parent = client->dev.parent;
|
|
haptics->input_dev->close = drv2667_close;
|
|
input_set_drvdata(haptics->input_dev, haptics);
|
|
input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE);
|
|
|
|
error = input_ff_create_memless(haptics->input_dev, NULL,
|
|
drv2667_haptics_play);
|
|
if (error) {
|
|
dev_err(&client->dev, "input_ff_create() failed: %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
|
|
INIT_WORK(&haptics->work, drv2667_worker);
|
|
|
|
haptics->client = client;
|
|
i2c_set_clientdata(client, haptics);
|
|
|
|
haptics->regmap = devm_regmap_init_i2c(client, &drv2667_regmap_config);
|
|
if (IS_ERR(haptics->regmap)) {
|
|
error = PTR_ERR(haptics->regmap);
|
|
dev_err(&client->dev, "Failed to allocate register map: %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
|
|
error = drv2667_init(haptics);
|
|
if (error) {
|
|
dev_err(&client->dev, "Device init failed: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
error = input_register_device(haptics->input_dev);
|
|
if (error) {
|
|
dev_err(&client->dev, "couldn't register input device: %d\n",
|
|
error);
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int drv2667_suspend(struct device *dev)
|
|
{
|
|
struct drv2667_data *haptics = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
|
|
mutex_lock(&haptics->input_dev->mutex);
|
|
|
|
if (input_device_enabled(haptics->input_dev)) {
|
|
ret = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
|
|
DRV2667_STANDBY, DRV2667_STANDBY);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to set standby mode\n");
|
|
regulator_disable(haptics->regulator);
|
|
goto out;
|
|
}
|
|
|
|
ret = regulator_disable(haptics->regulator);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to disable regulator\n");
|
|
regmap_update_bits(haptics->regmap,
|
|
DRV2667_CTRL_2,
|
|
DRV2667_STANDBY, 0);
|
|
}
|
|
}
|
|
out:
|
|
mutex_unlock(&haptics->input_dev->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int drv2667_resume(struct device *dev)
|
|
{
|
|
struct drv2667_data *haptics = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
|
|
mutex_lock(&haptics->input_dev->mutex);
|
|
|
|
if (input_device_enabled(haptics->input_dev)) {
|
|
ret = regulator_enable(haptics->regulator);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to enable regulator\n");
|
|
goto out;
|
|
}
|
|
|
|
ret = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
|
|
DRV2667_STANDBY, 0);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to unset standby mode\n");
|
|
regulator_disable(haptics->regulator);
|
|
goto out;
|
|
}
|
|
|
|
}
|
|
|
|
out:
|
|
mutex_unlock(&haptics->input_dev->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static DEFINE_SIMPLE_DEV_PM_OPS(drv2667_pm_ops, drv2667_suspend, drv2667_resume);
|
|
|
|
static const struct i2c_device_id drv2667_id[] = {
|
|
{ "drv2667", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, drv2667_id);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id drv2667_of_match[] = {
|
|
{ .compatible = "ti,drv2667", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, drv2667_of_match);
|
|
#endif
|
|
|
|
static struct i2c_driver drv2667_driver = {
|
|
.probe = drv2667_probe,
|
|
.driver = {
|
|
.name = "drv2667-haptics",
|
|
.of_match_table = of_match_ptr(drv2667_of_match),
|
|
.pm = pm_sleep_ptr(&drv2667_pm_ops),
|
|
},
|
|
.id_table = drv2667_id,
|
|
};
|
|
module_i2c_driver(drv2667_driver);
|
|
|
|
MODULE_DESCRIPTION("TI DRV2667 haptics driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
|