302 lines
7.6 KiB
C
302 lines
7.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Driver for Novatek i2c touchscreen controller as found on
|
|
* the Acer Iconia One 7 B1-750 tablet. The Touchscreen controller
|
|
* model-number is unknown. Android calls this a "NVT-ts" touchscreen,
|
|
* but that may apply to other Novatek controller models too.
|
|
*
|
|
* Copyright (c) 2023 Hans de Goede <hdegoede@redhat.com>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/input.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/input/touchscreen.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#define NVT_TS_TOUCH_START 0x00
|
|
#define NVT_TS_TOUCH_SIZE 6
|
|
|
|
#define NVT_TS_PARAMETERS_START 0x78
|
|
/* These are offsets from NVT_TS_PARAMETERS_START */
|
|
#define NVT_TS_PARAMS_WIDTH 0x04
|
|
#define NVT_TS_PARAMS_HEIGHT 0x06
|
|
#define NVT_TS_PARAMS_MAX_TOUCH 0x09
|
|
#define NVT_TS_PARAMS_MAX_BUTTONS 0x0a
|
|
#define NVT_TS_PARAMS_IRQ_TYPE 0x0b
|
|
#define NVT_TS_PARAMS_WAKE_TYPE 0x0c
|
|
#define NVT_TS_PARAMS_CHIP_ID 0x0e
|
|
#define NVT_TS_PARAMS_SIZE 0x0f
|
|
|
|
#define NVT_TS_SUPPORTED_WAKE_TYPE 0x05
|
|
#define NVT_TS_SUPPORTED_CHIP_ID 0x05
|
|
|
|
#define NVT_TS_MAX_TOUCHES 10
|
|
#define NVT_TS_MAX_SIZE 4096
|
|
|
|
#define NVT_TS_TOUCH_INVALID 0xff
|
|
#define NVT_TS_TOUCH_SLOT_SHIFT 3
|
|
#define NVT_TS_TOUCH_TYPE_MASK GENMASK(2, 0)
|
|
#define NVT_TS_TOUCH_NEW 1
|
|
#define NVT_TS_TOUCH_UPDATE 2
|
|
#define NVT_TS_TOUCH_RELEASE 3
|
|
|
|
static const int nvt_ts_irq_type[4] = {
|
|
IRQF_TRIGGER_RISING,
|
|
IRQF_TRIGGER_FALLING,
|
|
IRQF_TRIGGER_LOW,
|
|
IRQF_TRIGGER_HIGH
|
|
};
|
|
|
|
struct nvt_ts_data {
|
|
struct i2c_client *client;
|
|
struct input_dev *input;
|
|
struct gpio_desc *reset_gpio;
|
|
struct touchscreen_properties prop;
|
|
int max_touches;
|
|
u8 buf[NVT_TS_TOUCH_SIZE * NVT_TS_MAX_TOUCHES];
|
|
};
|
|
|
|
static int nvt_ts_read_data(struct i2c_client *client, u8 reg, u8 *data, int count)
|
|
{
|
|
struct i2c_msg msg[2] = {
|
|
{
|
|
.addr = client->addr,
|
|
.len = 1,
|
|
.buf = ®,
|
|
},
|
|
{
|
|
.addr = client->addr,
|
|
.flags = I2C_M_RD,
|
|
.len = count,
|
|
.buf = data,
|
|
}
|
|
};
|
|
int ret;
|
|
|
|
ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
|
|
if (ret != ARRAY_SIZE(msg)) {
|
|
dev_err(&client->dev, "Error reading from 0x%02x: %d\n", reg, ret);
|
|
return (ret < 0) ? ret : -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t nvt_ts_irq(int irq, void *dev_id)
|
|
{
|
|
struct nvt_ts_data *data = dev_id;
|
|
struct device *dev = &data->client->dev;
|
|
int i, error, slot, x, y;
|
|
bool active;
|
|
u8 *touch;
|
|
|
|
error = nvt_ts_read_data(data->client, NVT_TS_TOUCH_START, data->buf,
|
|
data->max_touches * NVT_TS_TOUCH_SIZE);
|
|
if (error)
|
|
return IRQ_HANDLED;
|
|
|
|
for (i = 0; i < data->max_touches; i++) {
|
|
touch = &data->buf[i * NVT_TS_TOUCH_SIZE];
|
|
|
|
if (touch[0] == NVT_TS_TOUCH_INVALID)
|
|
continue;
|
|
|
|
slot = touch[0] >> NVT_TS_TOUCH_SLOT_SHIFT;
|
|
if (slot < 1 || slot > data->max_touches) {
|
|
dev_warn(dev, "slot %d out of range, ignoring\n", slot);
|
|
continue;
|
|
}
|
|
|
|
switch (touch[0] & NVT_TS_TOUCH_TYPE_MASK) {
|
|
case NVT_TS_TOUCH_NEW:
|
|
case NVT_TS_TOUCH_UPDATE:
|
|
active = true;
|
|
break;
|
|
case NVT_TS_TOUCH_RELEASE:
|
|
active = false;
|
|
break;
|
|
default:
|
|
dev_warn(dev, "slot %d unknown state %d\n", slot, touch[0] & 7);
|
|
continue;
|
|
}
|
|
|
|
slot--;
|
|
x = (touch[1] << 4) | (touch[3] >> 4);
|
|
y = (touch[2] << 4) | (touch[3] & 0x0f);
|
|
|
|
input_mt_slot(data->input, slot);
|
|
input_mt_report_slot_state(data->input, MT_TOOL_FINGER, active);
|
|
touchscreen_report_pos(data->input, &data->prop, x, y, true);
|
|
}
|
|
|
|
input_mt_sync_frame(data->input);
|
|
input_sync(data->input);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int nvt_ts_start(struct input_dev *dev)
|
|
{
|
|
struct nvt_ts_data *data = input_get_drvdata(dev);
|
|
|
|
enable_irq(data->client->irq);
|
|
gpiod_set_value_cansleep(data->reset_gpio, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void nvt_ts_stop(struct input_dev *dev)
|
|
{
|
|
struct nvt_ts_data *data = input_get_drvdata(dev);
|
|
|
|
disable_irq(data->client->irq);
|
|
gpiod_set_value_cansleep(data->reset_gpio, 1);
|
|
}
|
|
|
|
static int nvt_ts_suspend(struct device *dev)
|
|
{
|
|
struct nvt_ts_data *data = i2c_get_clientdata(to_i2c_client(dev));
|
|
|
|
mutex_lock(&data->input->mutex);
|
|
if (input_device_enabled(data->input))
|
|
nvt_ts_stop(data->input);
|
|
mutex_unlock(&data->input->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nvt_ts_resume(struct device *dev)
|
|
{
|
|
struct nvt_ts_data *data = i2c_get_clientdata(to_i2c_client(dev));
|
|
|
|
mutex_lock(&data->input->mutex);
|
|
if (input_device_enabled(data->input))
|
|
nvt_ts_start(data->input);
|
|
mutex_unlock(&data->input->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static DEFINE_SIMPLE_DEV_PM_OPS(nvt_ts_pm_ops, nvt_ts_suspend, nvt_ts_resume);
|
|
|
|
static int nvt_ts_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
int error, width, height, irq_type;
|
|
struct nvt_ts_data *data;
|
|
struct input_dev *input;
|
|
|
|
if (!client->irq) {
|
|
dev_err(dev, "Error no irq specified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->client = client;
|
|
i2c_set_clientdata(client, data);
|
|
|
|
data->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
|
|
error = PTR_ERR_OR_ZERO(data->reset_gpio);
|
|
if (error) {
|
|
dev_err(dev, "failed to request reset GPIO: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
/* Wait for controller to come out of reset before params read */
|
|
msleep(100);
|
|
error = nvt_ts_read_data(data->client, NVT_TS_PARAMETERS_START,
|
|
data->buf, NVT_TS_PARAMS_SIZE);
|
|
gpiod_set_value_cansleep(data->reset_gpio, 1); /* Put back in reset */
|
|
if (error)
|
|
return error;
|
|
|
|
width = get_unaligned_be16(&data->buf[NVT_TS_PARAMS_WIDTH]);
|
|
height = get_unaligned_be16(&data->buf[NVT_TS_PARAMS_HEIGHT]);
|
|
data->max_touches = data->buf[NVT_TS_PARAMS_MAX_TOUCH];
|
|
irq_type = data->buf[NVT_TS_PARAMS_IRQ_TYPE];
|
|
|
|
if (width > NVT_TS_MAX_SIZE || height >= NVT_TS_MAX_SIZE ||
|
|
data->max_touches > NVT_TS_MAX_TOUCHES ||
|
|
irq_type >= ARRAY_SIZE(nvt_ts_irq_type) ||
|
|
data->buf[NVT_TS_PARAMS_WAKE_TYPE] != NVT_TS_SUPPORTED_WAKE_TYPE ||
|
|
data->buf[NVT_TS_PARAMS_CHIP_ID] != NVT_TS_SUPPORTED_CHIP_ID) {
|
|
dev_err(dev, "Unsupported touchscreen parameters: %*ph\n",
|
|
NVT_TS_PARAMS_SIZE, data->buf);
|
|
return -EIO;
|
|
}
|
|
|
|
dev_dbg(dev, "Detected %dx%d touchscreen with %d max touches\n",
|
|
width, height, data->max_touches);
|
|
|
|
if (data->buf[NVT_TS_PARAMS_MAX_BUTTONS])
|
|
dev_warn(dev, "Touchscreen buttons are not supported\n");
|
|
|
|
input = devm_input_allocate_device(dev);
|
|
if (!input)
|
|
return -ENOMEM;
|
|
|
|
input->name = client->name;
|
|
input->id.bustype = BUS_I2C;
|
|
input->open = nvt_ts_start;
|
|
input->close = nvt_ts_stop;
|
|
|
|
input_set_abs_params(input, ABS_MT_POSITION_X, 0, width - 1, 0, 0);
|
|
input_set_abs_params(input, ABS_MT_POSITION_Y, 0, height - 1, 0, 0);
|
|
touchscreen_parse_properties(input, true, &data->prop);
|
|
|
|
error = input_mt_init_slots(input, data->max_touches,
|
|
INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
|
|
if (error)
|
|
return error;
|
|
|
|
data->input = input;
|
|
input_set_drvdata(input, data);
|
|
|
|
error = devm_request_threaded_irq(dev, client->irq, NULL, nvt_ts_irq,
|
|
IRQF_ONESHOT | IRQF_NO_AUTOEN |
|
|
nvt_ts_irq_type[irq_type],
|
|
client->name, data);
|
|
if (error) {
|
|
dev_err(dev, "failed to request irq: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
error = input_register_device(input);
|
|
if (error) {
|
|
dev_err(dev, "failed to request irq: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id nvt_ts_i2c_id[] = {
|
|
{ "NVT-ts" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, nvt_ts_i2c_id);
|
|
|
|
static struct i2c_driver nvt_ts_driver = {
|
|
.driver = {
|
|
.name = "novatek-nvt-ts",
|
|
.pm = pm_sleep_ptr(&nvt_ts_pm_ops),
|
|
},
|
|
.probe = nvt_ts_probe,
|
|
.id_table = nvt_ts_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(nvt_ts_driver);
|
|
|
|
MODULE_DESCRIPTION("Novatek NVT-ts touchscreen driver");
|
|
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
|
MODULE_LICENSE("GPL");
|