41 lines
1.5 KiB
C
41 lines
1.5 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* i2c-gpio interface to platform code
|
|
*
|
|
* Copyright (C) 2007 Atmel Corporation
|
|
*/
|
|
#ifndef _LINUX_I2C_GPIO_H
|
|
#define _LINUX_I2C_GPIO_H
|
|
|
|
/**
|
|
* struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio
|
|
* @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz
|
|
* @timeout: clock stretching timeout in jiffies. If the slave keeps
|
|
* SCL low for longer than this, the transfer will time out.
|
|
* @sda_is_open_drain: SDA is configured as open drain, i.e. the pin
|
|
* isn't actively driven high when setting the output value high.
|
|
* gpio_get_value() must return the actual pin state even if the
|
|
* pin is configured as an output.
|
|
* @sda_is_output_only: SDA output drivers can't be turned off.
|
|
* This is for clients that can only read SDA/SCL.
|
|
* @sda_has_no_pullup: SDA is used in a non-compliant way and has no pull-up.
|
|
* Therefore disable open-drain.
|
|
* @scl_is_open_drain: SCL is set up as open drain. Same requirements
|
|
* as for sda_is_open_drain apply.
|
|
* @scl_is_output_only: SCL output drivers cannot be turned off.
|
|
* @scl_has_no_pullup: SCL is used in a non-compliant way and has no pull-up.
|
|
* Therefore disable open-drain.
|
|
*/
|
|
struct i2c_gpio_platform_data {
|
|
int udelay;
|
|
int timeout;
|
|
unsigned int sda_is_open_drain:1;
|
|
unsigned int sda_is_output_only:1;
|
|
unsigned int sda_has_no_pullup:1;
|
|
unsigned int scl_is_open_drain:1;
|
|
unsigned int scl_is_output_only:1;
|
|
unsigned int scl_has_no_pullup:1;
|
|
};
|
|
|
|
#endif /* _LINUX_I2C_GPIO_H */
|