linux-zen-desktop/tools/testing/selftests/powerpc/eeh/eeh-functions.sh

#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-only

export KSELFTESTS_SKIP=4

log() {
	echo >/dev/stderr $*
}

pe_ok() {
	local dev="$1"
	local path="/sys/bus/pci/devices/$dev/eeh_pe_state"

	# if a driver doesn't support the error handling callbacks then the
	# device is recovered by removing and re-probing it. This causes the
	# sysfs directory to disappear so read the PE state once and squash
	# any potential error messages
	local eeh_state="$(cat $path 2>/dev/null)"
	if [ -z "$eeh_state" ]; then
		return 1;
	fi

	local fw_state="$(echo $eeh_state | cut -d' ' -f1)"
	local sw_state="$(echo $eeh_state | cut -d' ' -f2)"

	# If EEH_PE_ISOLATED or EEH_PE_RECOVERING are set then the PE is in an
	# error state or being recovered. Either way, not ok.
	if [ "$((sw_state & 0x3))" -ne 0 ] ; then
		return 1
	fi

	# A functioning PE should have the EEH_STATE_MMIO_ACTIVE and
	# EEH_STATE_DMA_ACTIVE flags set. For some goddamn stupid reason
	# the platform backends set these when the PE is in reset. The
	# RECOVERING check above should stop any false positives though.
	if [ "$((fw_state & 0x18))" -ne "$((0x18))" ] ; then
		return 1
	fi

	return 0;
}

eeh_supported() {
	test -e /proc/powerpc/eeh && \
	grep -q 'EEH Subsystem is enabled' /proc/powerpc/eeh
}

eeh_test_prep() {
	if ! eeh_supported ; then
		echo "EEH not supported on this system, skipping"
		exit $KSELFTESTS_SKIP;
	fi

	if [ ! -e "/sys/kernel/debug/powerpc/eeh_dev_check" ] && \
	   [ ! -e "/sys/kernel/debug/powerpc/eeh_dev_break" ] ; then
		log "debugfs EEH testing files are missing. Is debugfs mounted?"
		exit $KSELFTESTS_SKIP;
	fi

	# Bump the max freeze count to something absurd so we don't
	# trip over it while breaking things.
	echo 5000 > /sys/kernel/debug/powerpc/eeh_max_freezes
}

eeh_can_break() {
	# skip bridges since we can't recover them (yet...)
	if [ -e "/sys/bus/pci/devices/$dev/pci_bus" ] ; then
		log "$dev, Skipped: bridge"
		return 1;
	fi

	# The ahci driver doesn't support error recovery. If the ahci device
	# happens to be hosting the root filesystem, and then we go and break
	# it the system will generally go down. We should probably fix that
	# at some point
	if [ "ahci" = "$(basename $(realpath /sys/bus/pci/devices/$dev/driver))" ] ; then
		log "$dev, Skipped: ahci doesn't support recovery"
		return 1;
	fi

	# Don't inject errosr into an already-frozen PE. This happens with
	# PEs that contain multiple PCI devices (e.g. multi-function cards)
	# and injecting new errors during the recovery process will probably
	# result in the recovery failing and the device being marked as
	# failed.
	if ! pe_ok $dev ; then
		log "$dev, Skipped: Bad initial PE state"
		return 1;
	fi

	return 0
}

eeh_one_dev() {
	local dev="$1"

	# Using this function from the command line is sometimes useful for
	# testing so check that the argument is a well-formed sysfs device
	# name.
	if ! test -e /sys/bus/pci/devices/$dev/ ; then
		log "Error: '$dev' must be a sysfs device name (DDDD:BB:DD.F)"
		return 1;
	fi

	# Break it
	echo $dev >/sys/kernel/debug/powerpc/eeh_dev_break

	# Force an EEH device check. If the kernel has already
	# noticed the EEH (due to a driver poll or whatever), this
	# is a no-op.
	echo $dev >/sys/kernel/debug/powerpc/eeh_dev_check

	# Default to a 60s timeout when waiting for a device to recover. This
	# is an arbitrary default which can be overridden by setting the
	# EEH_MAX_WAIT environmental variable when required.

	# The current record holder for longest recovery time is:
	#  "Adaptec Series 8 12G SAS/PCIe 3" at 39 seconds
	max_wait=${EEH_MAX_WAIT:=60}

	for i in `seq 0 ${max_wait}` ; do
		if pe_ok $dev ; then
			break;
		fi
		log "$dev, waited $i/${max_wait}"
		sleep 1
	done

	if ! pe_ok $dev ; then
		log "$dev, Failed to recover!"
		return 1;
	fi

	log "$dev, Recovered after $i seconds"
	return 0;
}

eeh_has_driver() {
	test -e /sys/bus/pci/devices/$1/driver;
	return $?
}

eeh_can_recover() {
	# we'll get an IO error if the device's current driver doesn't support
	# error recovery
	echo $1 > '/sys/kernel/debug/powerpc/eeh_dev_can_recover' 2>/dev/null

	return $?
}

eeh_find_all_pfs() {
	devices=""

	# SR-IOV on pseries requires hypervisor support, so check for that
	is_pseries=""
	if grep -q pSeries /proc/cpuinfo ; then
		if [ ! -f /proc/device-tree/rtas/ibm,open-sriov-allow-unfreeze ] ||
		   [ ! -f /proc/device-tree/rtas/ibm,open-sriov-map-pe-number ] ; then
			return 1;
		fi

		is_pseries="true"
	fi

	for dev in `ls -1 /sys/bus/pci/devices/` ; do
		sysfs="/sys/bus/pci/devices/$dev"
		if [ ! -e "$sysfs/sriov_numvfs" ] ; then
			continue
		fi

		# skip unsupported PFs on pseries
		if [ -z "$is_pseries" ] &&
		   [ ! -f "$sysfs/of_node/ibm,is-open-sriov-pf" ] &&
		   [ ! -f "$sysfs/of_node/ibm,open-sriov-vf-bar-info" ] ; then
			continue;
		fi

		# no driver, no vfs
		if ! eeh_has_driver $dev ; then
			continue
		fi

		devices="$devices $dev"
	done

	if [ -z "$devices" ] ; then
		return 1;
	fi

	echo $devices
	return 0;
}

# attempts to enable one VF on each PF so we can do VF specific tests.
# stdout: list of enabled VFs, one per line
# return code: 0 if vfs are found, 1 otherwise
eeh_enable_vfs() {
	pf_list="$(eeh_find_all_pfs)"

	vfs=0
	for dev in $pf_list ; do
		pf_sysfs="/sys/bus/pci/devices/$dev"

		# make sure we have a single VF
		echo 0 > "$pf_sysfs/sriov_numvfs"
		echo 1 > "$pf_sysfs/sriov_numvfs"
		if [ "$?" != 0 ] ; then
			log "Unable to enable VFs on $pf, skipping"
			continue;
		fi

		vf="$(basename $(realpath "$pf_sysfs/virtfn0"))"
		if [ $? != 0 ] ; then
			log "unable to find enabled vf on $pf"
			echo 0 > "$pf_sysfs/sriov_numvfs"
			continue;
		fi

		if ! eeh_can_break $vf ; then
			log "skipping "

			echo 0 > "$pf_sysfs/sriov_numvfs"
			continue;
		fi

		vfs="$((vfs + 1))"
		echo $vf
	done

	test "$vfs" != 0
	return $?
}

eeh_disable_vfs() {
	pf_list="$(eeh_find_all_pfs)"
	if [ -z "$pf_list" ] ; then
		return 1;
	fi

	for dev in $pf_list ; do
		echo 0 > "/sys/bus/pci/devices/$dev/sriov_numvfs"
	done

	return 0;
}