142 lines
4.2 KiB
Plaintext
142 lines
4.2 KiB
Plaintext
What: /sys/class/leds/<led>/device_name
|
|
Date: Dec 2017
|
|
KernelVersion: 4.16
|
|
Contact: linux-leds@vger.kernel.org
|
|
Description:
|
|
Specifies the network device name to monitor.
|
|
|
|
What: /sys/class/leds/<led>/interval
|
|
Date: Dec 2017
|
|
KernelVersion: 4.16
|
|
Contact: linux-leds@vger.kernel.org
|
|
Description:
|
|
Specifies the duration of the LED blink in milliseconds.
|
|
Defaults to 50 ms.
|
|
|
|
When offloaded is true, the interval value MUST be set to the
|
|
default value and cannot be changed.
|
|
Trying to set any value in this specific mode will return
|
|
an EINVAL error.
|
|
|
|
What: /sys/class/leds/<led>/link
|
|
Date: Dec 2017
|
|
KernelVersion: 4.16
|
|
Contact: linux-leds@vger.kernel.org
|
|
Description:
|
|
Signal the link state of the named network device.
|
|
|
|
If set to 0 (default), the LED's normal state is off.
|
|
|
|
If set to 1, the LED's normal state reflects the link state
|
|
of the named network device.
|
|
Setting this value also immediately changes the LED state.
|
|
|
|
|
|
What: /sys/class/leds/<led>/tx
|
|
Date: Dec 2017
|
|
KernelVersion: 4.16
|
|
Contact: linux-leds@vger.kernel.org
|
|
Description:
|
|
Signal transmission of data on the named network device.
|
|
|
|
If set to 0 (default), the LED will not blink on transmission.
|
|
|
|
If set to 1, the LED will blink for the milliseconds specified
|
|
in interval to signal transmission.
|
|
|
|
When offloaded is true, the blink interval is controlled by
|
|
hardware and won't reflect the value set in interval.
|
|
|
|
What: /sys/class/leds/<led>/rx
|
|
Date: Dec 2017
|
|
KernelVersion: 4.16
|
|
Contact: linux-leds@vger.kernel.org
|
|
Description:
|
|
Signal reception of data on the named network device.
|
|
|
|
If set to 0 (default), the LED will not blink on reception.
|
|
|
|
If set to 1, the LED will blink for the milliseconds specified
|
|
in interval to signal reception.
|
|
|
|
When offloaded is true, the blink interval is controlled by
|
|
hardware and won't reflect the value set in interval.
|
|
|
|
What: /sys/class/leds/<led>/offloaded
|
|
Date: Jun 2023
|
|
KernelVersion: 6.5
|
|
Contact: linux-leds@vger.kernel.org
|
|
Description:
|
|
Communicate whether the LED trigger modes are offloaded to
|
|
hardware or whether software fallback is used.
|
|
|
|
If 0, the LED is using software fallback to blink.
|
|
|
|
If 1, the LED blinking in requested mode is offloaded to
|
|
hardware.
|
|
|
|
What: /sys/class/leds/<led>/link_10
|
|
Date: Jun 2023
|
|
KernelVersion: 6.5
|
|
Contact: linux-leds@vger.kernel.org
|
|
Description:
|
|
Signal the link speed state of 10Mbps of the named network device.
|
|
|
|
If set to 0 (default), the LED's normal state is off.
|
|
|
|
If set to 1, the LED's normal state reflects the link state
|
|
speed of 10MBps of the named network device.
|
|
Setting this value also immediately changes the LED state.
|
|
|
|
What: /sys/class/leds/<led>/link_100
|
|
Date: Jun 2023
|
|
KernelVersion: 6.5
|
|
Contact: linux-leds@vger.kernel.org
|
|
Description:
|
|
Signal the link speed state of 100Mbps of the named network device.
|
|
|
|
If set to 0 (default), the LED's normal state is off.
|
|
|
|
If set to 1, the LED's normal state reflects the link state
|
|
speed of 100Mbps of the named network device.
|
|
Setting this value also immediately changes the LED state.
|
|
|
|
What: /sys/class/leds/<led>/link_1000
|
|
Date: Jun 2023
|
|
KernelVersion: 6.5
|
|
Contact: linux-leds@vger.kernel.org
|
|
Description:
|
|
Signal the link speed state of 1000Mbps of the named network device.
|
|
|
|
If set to 0 (default), the LED's normal state is off.
|
|
|
|
If set to 1, the LED's normal state reflects the link state
|
|
speed of 1000Mbps of the named network device.
|
|
Setting this value also immediately changes the LED state.
|
|
|
|
What: /sys/class/leds/<led>/half_duplex
|
|
Date: Jun 2023
|
|
KernelVersion: 6.5
|
|
Contact: linux-leds@vger.kernel.org
|
|
Description:
|
|
Signal the link half duplex state of the named network device.
|
|
|
|
If set to 0 (default), the LED's normal state is off.
|
|
|
|
If set to 1, the LED's normal state reflects the link half
|
|
duplex state of the named network device.
|
|
Setting this value also immediately changes the LED state.
|
|
|
|
What: /sys/class/leds/<led>/full_duplex
|
|
Date: Jun 2023
|
|
KernelVersion: 6.5
|
|
Contact: linux-leds@vger.kernel.org
|
|
Description:
|
|
Signal the link full duplex state of the named network device.
|
|
|
|
If set to 0 (default), the LED's normal state is off.
|
|
|
|
If set to 1, the LED's normal state reflects the link full
|
|
duplex state of the named network device.
|
|
Setting this value also immediately changes the LED state.
|