98 lines
3.1 KiB
Plaintext
98 lines
3.1 KiB
Plaintext
Atmel system registers
|
|
|
|
Chipid required properties:
|
|
- compatible: Should be "atmel,sama5d2-chipid" or "microchip,sama7g5-chipid"
|
|
- reg : Should contain registers location and length
|
|
|
|
PIT Timer required properties:
|
|
- compatible: Should be "atmel,at91sam9260-pit"
|
|
- reg: Should contain registers location and length
|
|
- interrupts: Should contain interrupt for the PIT which is the IRQ line
|
|
shared across all System Controller members.
|
|
|
|
PIT64B Timer required properties:
|
|
- compatible: Should be "microchip,sam9x60-pit64b"
|
|
- reg: Should contain registers location and length
|
|
- interrupts: Should contain interrupt for PIT64B timer
|
|
- clocks: Should contain the available clock sources for PIT64B timer.
|
|
|
|
System Timer (ST) required properties:
|
|
- compatible: Should be "atmel,at91rm9200-st", "syscon", "simple-mfd"
|
|
- reg: Should contain registers location and length
|
|
- interrupts: Should contain interrupt for the ST which is the IRQ line
|
|
shared across all System Controller members.
|
|
- clocks: phandle to input clock.
|
|
Its subnodes can be:
|
|
- watchdog: compatible should be "atmel,at91rm9200-wdt"
|
|
|
|
RAMC SDRAM/DDR Controller required properties:
|
|
- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
|
|
"atmel,at91sam9260-sdramc",
|
|
"atmel,at91sam9g45-ddramc",
|
|
"atmel,sama5d3-ddramc",
|
|
"microchip,sam9x60-ddramc",
|
|
"microchip,sama7g5-uddrc"
|
|
- reg: Should contain registers location and length
|
|
|
|
Examples:
|
|
|
|
ramc0: ramc@ffffe800 {
|
|
compatible = "atmel,at91sam9g45-ddramc";
|
|
reg = <0xffffe800 0x200>;
|
|
};
|
|
|
|
RAMC PHY Controller required properties:
|
|
- compatible: Should be "microchip,sama7g5-ddr3phy", "syscon"
|
|
- reg: Should contain registers location and length
|
|
|
|
Example:
|
|
|
|
ddr3phy: ddr3phy@e3804000 {
|
|
compatible = "microchip,sama7g5-ddr3phy", "syscon";
|
|
reg = <0xe3804000 0x1000>;
|
|
};
|
|
|
|
Special Function Registers (SFR)
|
|
|
|
Special Function Registers (SFR) manage specific aspects of the integrated
|
|
memory, bridge implementations, processor and other functionality not controlled
|
|
elsewhere.
|
|
|
|
required properties:
|
|
- compatible: Should be "atmel,<chip>-sfr", "syscon" or
|
|
"atmel,<chip>-sfrbu", "syscon"
|
|
<chip> can be "sama5d3", "sama5d4" or "sama5d2".
|
|
It also can be "microchip,sam9x60-sfr", "syscon".
|
|
- reg: Should contain registers location and length
|
|
|
|
sfr@f0038000 {
|
|
compatible = "atmel,sama5d3-sfr", "syscon";
|
|
reg = <0xf0038000 0x60>;
|
|
};
|
|
|
|
Security Module (SECUMOD)
|
|
|
|
The Security Module macrocell provides all necessary secure functions to avoid
|
|
voltage, temperature, frequency and mechanical attacks on the chip. It also
|
|
embeds secure memories that can be scrambled.
|
|
|
|
The Security Module also offers the PIOBU pins which can be used as GPIO pins.
|
|
Note that they maintain their voltage during Backup/Self-refresh.
|
|
|
|
required properties:
|
|
- compatible: Should be "atmel,<chip>-secumod", "syscon".
|
|
<chip> can be "sama5d2".
|
|
- reg: Should contain registers location and length
|
|
- gpio-controller: Marks the port as GPIO controller.
|
|
- #gpio-cells: There are 2. The pin number is the
|
|
first, the second represents additional
|
|
parameters such as GPIO_ACTIVE_HIGH/LOW.
|
|
|
|
|
|
secumod@fc040000 {
|
|
compatible = "atmel,sama5d2-secumod", "syscon";
|
|
reg = <0xfc040000 0x100>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|