243 lines
7.7 KiB
YAML
243 lines
7.7 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/cache/l2c2x0.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: ARM L2 Cache Controller
|
|
|
|
maintainers:
|
|
- Rob Herring <robh@kernel.org>
|
|
|
|
description: |+
|
|
ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/
|
|
PL220/PL310 and variants) based level 2 cache controller. All these various
|
|
implementations of the L2 cache controller have compatible programming
|
|
models (Note 1). Some of the properties that are just prefixed "cache-*" are
|
|
taken from section 3.7.3 of the Devicetree Specification which can be found
|
|
at:
|
|
https://www.devicetree.org/specifications/
|
|
|
|
Note 1: The description in this document doesn't apply to integrated L2
|
|
cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These
|
|
integrated L2 controllers are assumed to be all preconfigured by
|
|
early secure boot code. Thus no need to deal with their configuration
|
|
in the kernel at all.
|
|
|
|
allOf:
|
|
- $ref: /schemas/cache-controller.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- enum:
|
|
- arm,pl310-cache
|
|
- arm,l220-cache
|
|
- arm,l210-cache
|
|
# DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
|
|
- bcm,bcm11351-a2-pl310-cache
|
|
# For Broadcom bcm11351 chipset where an
|
|
# offset needs to be added to the address before passing down to the L2
|
|
# cache controller
|
|
- brcm,bcm11351-a2-pl310-cache
|
|
# Marvell Controller designed to be
|
|
# compatible with the ARM one, with system cache mode (meaning
|
|
# maintenance operations on L1 are broadcasted to the L2 and L2
|
|
# performs the same operation).
|
|
- marvell,aurora-system-cache
|
|
# Marvell Controller designed to be
|
|
# compatible with the ARM one with outer cache mode.
|
|
- marvell,aurora-outer-cache
|
|
- items:
|
|
# Marvell Tauros3 cache controller, compatible
|
|
# with arm,pl310-cache controller.
|
|
- const: marvell,tauros3-cache
|
|
- const: arm,pl310-cache
|
|
|
|
cache-level:
|
|
const: 2
|
|
|
|
cache-unified: true
|
|
cache-size: true
|
|
cache-sets: true
|
|
cache-block-size: true
|
|
cache-line-size: true
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
arm,data-latency:
|
|
description: Cycles of latency for Data RAM accesses. Specifies 3 cells of
|
|
read, write and setup latencies. Minimum valid values are 1. Controllers
|
|
without setup latency control should use a value of 0.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
minItems: 2
|
|
maxItems: 3
|
|
items:
|
|
minimum: 0
|
|
maximum: 8
|
|
|
|
arm,tag-latency:
|
|
description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of
|
|
read, write and setup latencies. Controllers without setup latency control
|
|
should use 0. Controllers without separate read and write Tag RAM latency
|
|
values should only use the first cell.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
minItems: 1
|
|
maxItems: 3
|
|
items:
|
|
minimum: 0
|
|
maximum: 8
|
|
|
|
arm,dirty-latency:
|
|
description: Cycles of latency for Dirty RAMs. This is a single cell.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
minimum: 1
|
|
maximum: 8
|
|
|
|
arm,filter-ranges:
|
|
description: <start length> Starting address and length of window to
|
|
filter. Addresses in the filter window are directed to the M1 port. Other
|
|
addresses will go to the M0 port.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
items:
|
|
minItems: 2
|
|
maxItems: 2
|
|
|
|
arm,io-coherent:
|
|
description: indicates that the system is operating in an hardware
|
|
I/O coherent mode. Valid only when the arm,pl310-cache compatible
|
|
string is used.
|
|
type: boolean
|
|
|
|
interrupts:
|
|
# Either a single combined interrupt or up to 9 individual interrupts
|
|
minItems: 1
|
|
maxItems: 9
|
|
|
|
cache-id-part:
|
|
description: cache id part number to be used if it is not present
|
|
on hardware
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
|
|
wt-override:
|
|
description: If present then L2 is forced to Write through mode
|
|
type: boolean
|
|
|
|
arm,double-linefill:
|
|
description: Override double linefill enable setting. Enable if
|
|
non-zero, disable if zero.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
|
|
arm,double-linefill-incr:
|
|
description: Override double linefill on INCR read. Enable
|
|
if non-zero, disable if zero.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
|
|
arm,double-linefill-wrap:
|
|
description: Override double linefill on WRAP read. Enable
|
|
if non-zero, disable if zero.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
|
|
arm,prefetch-drop:
|
|
description: Override prefetch drop enable setting. Enable if non-zero,
|
|
disable if zero.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
|
|
arm,prefetch-offset:
|
|
description: Override prefetch offset value.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31]
|
|
|
|
arm,shared-override:
|
|
description: The default behavior of the L220 or PL310 cache
|
|
controllers with respect to the shareable attribute is to transform "normal
|
|
memory non-cacheable transactions" into "cacheable no allocate" (for reads)
|
|
or "write through no write allocate" (for writes).
|
|
On systems where this may cause DMA buffer corruption, this property must
|
|
be specified to indicate that such transforms are precluded.
|
|
type: boolean
|
|
|
|
arm,parity-enable:
|
|
description: enable parity checking on the L2 cache (L220 or PL310).
|
|
type: boolean
|
|
|
|
arm,parity-disable:
|
|
description: disable parity checking on the L2 cache (L220 or PL310).
|
|
type: boolean
|
|
|
|
marvell,ecc-enable:
|
|
description: enable ECC protection on the L2 cache
|
|
type: boolean
|
|
|
|
arm,outer-sync-disable:
|
|
description: disable the outer sync operation on the L2 cache.
|
|
Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that
|
|
will randomly hang unless outer sync operations are disabled.
|
|
type: boolean
|
|
|
|
prefetch-data:
|
|
description: |
|
|
Data prefetch. Value: <0> (forcibly disable), <1>
|
|
(forcibly enable), property absent (retain settings set by firmware)
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
|
|
prefetch-instr:
|
|
description: |
|
|
Instruction prefetch. Value: <0> (forcibly disable),
|
|
<1> (forcibly enable), property absent (retain settings set by
|
|
firmware)
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
|
|
arm,dynamic-clock-gating:
|
|
description: |
|
|
L2 dynamic clock gating. Value: <0> (forcibly
|
|
disable), <1> (forcibly enable), property absent (OS specific behavior,
|
|
preferably retain firmware settings)
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
|
|
arm,standby-mode:
|
|
description: L2 standby mode enable. Value <0> (forcibly disable),
|
|
<1> (forcibly enable), property absent (OS specific behavior,
|
|
preferably retain firmware settings)
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
enum: [0, 1]
|
|
|
|
arm,early-bresp-disable:
|
|
description: Disable the CA9 optimization Early BRESP (PL310)
|
|
type: boolean
|
|
|
|
arm,full-line-zero-disable:
|
|
description: Disable the CA9 optimization Full line of zero
|
|
write (PL310)
|
|
type: boolean
|
|
|
|
required:
|
|
- compatible
|
|
- cache-unified
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
cache-controller@fff12000 {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0xfff12000 0x1000>;
|
|
arm,data-latency = <1 1 1>;
|
|
arm,tag-latency = <2 2 2>;
|
|
arm,filter-ranges = <0x80000000 0x8000000>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
interrupts = <45>;
|
|
};
|
|
|
|
...
|