118 lines
2.6 KiB
YAML
118 lines
2.6 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/bridge/lontium,lt9211.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge.
|
|
|
|
maintainers:
|
|
- Marek Vasut <marex@denx.de>
|
|
|
|
description: |
|
|
The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS
|
|
or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- lontium,lt9211
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
reset-gpios:
|
|
maxItems: 1
|
|
description: GPIO connected to active high RESET pin.
|
|
|
|
vccio-supply:
|
|
description: Regulator for 1.8V IO power.
|
|
|
|
ports:
|
|
$ref: /schemas/graph.yaml#/properties/ports
|
|
|
|
properties:
|
|
port@0:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description:
|
|
Primary MIPI DSI port-1 for MIPI input or
|
|
LVDS port-1 for LVDS input or DPI input.
|
|
|
|
port@1:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description:
|
|
Additional MIPI port-2 for MIPI input or LVDS port-2
|
|
for LVDS input. Used in combination with primary
|
|
port-1 to drive higher resolution displays
|
|
|
|
port@2:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description:
|
|
Primary MIPI DSI port-1 for MIPI output or
|
|
LVDS port-1 for LVDS output or DPI output.
|
|
|
|
port@3:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description:
|
|
Additional MIPI port-2 for MIPI output or LVDS port-2
|
|
for LVDS output. Used in combination with primary
|
|
port-1 to drive higher resolution displays.
|
|
|
|
required:
|
|
- port@0
|
|
- port@2
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- vccio-supply
|
|
- ports
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
hdmi-bridge@3b {
|
|
compatible = "lontium,lt9211";
|
|
reg = <0x3b>;
|
|
|
|
reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
|
|
interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
vccio-supply = <<9211_1v8>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
endpoint {
|
|
remote-endpoint = <&dsi0_out>;
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
|
|
endpoint {
|
|
remote-endpoint = <&panel_in_lvds>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|