107 lines
2.2 KiB
YAML
107 lines
2.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/bridge/nxp,ptn3460.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: NXP PTN3460 eDP to LVDS bridge
|
|
|
|
maintainers:
|
|
- Sean Paul <seanpaul@chromium.org>
|
|
|
|
properties:
|
|
compatible:
|
|
const: nxp,ptn3460
|
|
|
|
reg:
|
|
description: I2C address of the bridge
|
|
maxItems: 1
|
|
|
|
edid-emulation:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
The EDID emulation entry to use
|
|
Value Resolution Description
|
|
0 1024x768 NXP Generic
|
|
1 1920x1080 NXP Generic
|
|
2 1920x1080 NXP Generic
|
|
3 1600x900 Samsung LTM200KT
|
|
4 1920x1080 Samsung LTM230HT
|
|
5 1366x768 NXP Generic
|
|
6 1600x900 ChiMei M215HGE
|
|
enum: [0, 1, 2, 3, 4, 5, 6]
|
|
|
|
powerdown-gpios:
|
|
description: GPIO connected to the PD_N signal.
|
|
maxItems: 1
|
|
|
|
reset-gpios:
|
|
description: GPIO connected to the RST_N signal.
|
|
maxItems: 1
|
|
|
|
ports:
|
|
$ref: /schemas/graph.yaml#/properties/ports
|
|
|
|
properties:
|
|
port@0:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description:
|
|
Video port for LVDS output
|
|
|
|
port@1:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description:
|
|
Video port for eDP input
|
|
|
|
required:
|
|
- port@0
|
|
- port@1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- edid-emulation
|
|
- powerdown-gpios
|
|
- reset-gpios
|
|
- ports
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
bridge@20 {
|
|
compatible = "nxp,ptn3460";
|
|
reg = <0x20>;
|
|
edid-emulation = <5>;
|
|
powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
bridge_out: endpoint {
|
|
remote-endpoint = <&panel_in>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
bridge_in: endpoint {
|
|
remote-endpoint = <&dp_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|