137 lines
3.1 KiB
YAML
137 lines
3.1 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Mediatek HDMI Encoder
|
|
|
|
maintainers:
|
|
- CK Hu <ck.hu@mediatek.com>
|
|
- Jitao shi <jitao.shi@mediatek.com>
|
|
|
|
description: |
|
|
The Mediatek HDMI encoder can generate HDMI 1.4a or MHL 2.0 signals from
|
|
its parallel input.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- mediatek,mt2701-hdmi
|
|
- mediatek,mt7623-hdmi
|
|
- mediatek,mt8167-hdmi
|
|
- mediatek,mt8173-hdmi
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
items:
|
|
- description: Pixel Clock
|
|
- description: HDMI PLL
|
|
- description: Bit Clock
|
|
- description: S/PDIF Clock
|
|
|
|
clock-names:
|
|
items:
|
|
- const: pixel
|
|
- const: pll
|
|
- const: bclk
|
|
- const: spdif
|
|
|
|
phys:
|
|
maxItems: 1
|
|
|
|
phy-names:
|
|
items:
|
|
- const: hdmi
|
|
|
|
mediatek,syscon-hdmi:
|
|
$ref: /schemas/types.yaml#/definitions/phandle-array
|
|
items:
|
|
- items:
|
|
- description: phandle to system configuration registers
|
|
- description: register offset in the system configuration registers
|
|
description: |
|
|
phandle link and register offset to the system configuration registers.
|
|
|
|
ports:
|
|
$ref: /schemas/graph.yaml#/properties/ports
|
|
|
|
properties:
|
|
port@0:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description: |
|
|
Input port node. This port should be connected to a DPI output port.
|
|
|
|
port@1:
|
|
$ref: /schemas/graph.yaml#/properties/port
|
|
description: |
|
|
Output port node. This port should be connected to the input port of a connector
|
|
node that contains a ddc-i2c-bus property, or to the input port of an attached
|
|
bridge chip, such as a SlimPort transmitter.
|
|
|
|
required:
|
|
- port@0
|
|
- port@1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
- clock-names
|
|
- phys
|
|
- phy-names
|
|
- mediatek,syscon-hdmi
|
|
- ports
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/mt8173-clk.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
hdmi0: hdmi@14025000 {
|
|
compatible = "mediatek,mt8173-hdmi";
|
|
reg = <0x14025000 0x400>;
|
|
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&mmsys CLK_MM_HDMI_PIXEL>,
|
|
<&mmsys CLK_MM_HDMI_PLLCK>,
|
|
<&mmsys CLK_MM_HDMI_AUDIO>,
|
|
<&mmsys CLK_MM_HDMI_SPDIF>;
|
|
clock-names = "pixel", "pll", "bclk", "spdif";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdmi_pin>;
|
|
phys = <&hdmi_phy>;
|
|
phy-names = "hdmi";
|
|
mediatek,syscon-hdmi = <&mmsys 0x900>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
hdmi0_in: endpoint {
|
|
remote-endpoint = <&dpi0_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
hdmi0_out: endpoint {
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|