63 lines
1.4 KiB
YAML
63 lines
1.4 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: PTN5150 CC (Configuration Channel) Logic device
|
|
|
|
maintainers:
|
|
- Krzysztof Kozlowski <krzk@kernel.org>
|
|
|
|
description: |
|
|
PTN5150 is a small thin low power CC logic chip supporting the USB Type-C
|
|
connector application with CC control logic detection and indication
|
|
functions. It is interfaced to the host controller using an I2C interface.
|
|
|
|
properties:
|
|
compatible:
|
|
const: nxp,ptn5150
|
|
|
|
int-gpios:
|
|
maxItems: 1
|
|
deprecated: true
|
|
description:
|
|
GPIO pin (input) connected to the PTN5150's INTB pin.
|
|
Use "interrupts" instead.
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
vbus-gpios:
|
|
maxItems: 1
|
|
description:
|
|
GPIO pin (output) used to control VBUS. If skipped, no such control
|
|
takes place.
|
|
|
|
required:
|
|
- compatible
|
|
- interrupts
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ptn5150@1d {
|
|
compatible = "nxp,ptn5150";
|
|
reg = <0x1d>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
|
|
vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|