108 lines
2.8 KiB
YAML
108 lines
2.8 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/gpio/nxp,pcf8575.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: PCF857x-compatible I/O expanders
|
|
|
|
maintainers:
|
|
- Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
|
|
description:
|
|
The PCF857x-compatible chips have "quasi-bidirectional" I/O lines that can be
|
|
driven high by a pull-up current source or driven low to ground. This
|
|
combines the direction and output level into a single bit per line, which
|
|
can't be read back. We can't actually know at initialization time whether a
|
|
line is configured (a) as output and driving the signal low/high, or (b) as
|
|
input and reporting a low/high value, without knowing the last value written
|
|
since the chip came out of reset (if any). The only reliable solution for
|
|
setting up line direction is thus to do it explicitly.
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- maxim,max7328
|
|
- maxim,max7329
|
|
- nxp,pca8574
|
|
- nxp,pca8575
|
|
- nxp,pca9670
|
|
- nxp,pca9671
|
|
- nxp,pca9672
|
|
- nxp,pca9673
|
|
- nxp,pca9674
|
|
- nxp,pca9675
|
|
- nxp,pcf8574
|
|
- nxp,pcf8574a
|
|
- nxp,pcf8575
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
gpio-line-names:
|
|
minItems: 1
|
|
maxItems: 16
|
|
|
|
gpio-controller: true
|
|
|
|
'#gpio-cells':
|
|
const: 2
|
|
description:
|
|
The first cell is the GPIO number and the second cell specifies GPIO
|
|
flags, as defined in <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH
|
|
and GPIO_ACTIVE_LOW flags are supported.
|
|
|
|
lines-initial-states:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description:
|
|
Bitmask that specifies the initial state of each line.
|
|
When a bit is set to zero, the corresponding line will be initialized to
|
|
the input (pulled-up) state.
|
|
When the bit is set to one, the line will be initialized to the
|
|
low-level output state.
|
|
If the property is not specified all lines will be initialized to the
|
|
input state.
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
|
|
'#interrupt-cells':
|
|
const: 2
|
|
|
|
wakeup-source: true
|
|
|
|
patternProperties:
|
|
"^(.+-hog(-[0-9]+)?)$":
|
|
type: object
|
|
|
|
required:
|
|
- gpio-hog
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- gpio-controller
|
|
- '#gpio-cells'
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pcf8575: gpio@20 {
|
|
compatible = "nxp,pcf8575";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&irqpin2>;
|
|
interrupts = <3 0>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|