305 lines
8.4 KiB
YAML
305 lines
8.4 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: ARM Generic Interrupt Controller, version 3
|
|
|
|
maintainers:
|
|
- Marc Zyngier <maz@kernel.org>
|
|
|
|
description: |
|
|
AArch64 SMP cores are often associated with a GICv3, providing Private
|
|
Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
|
|
Software Generated Interrupts (SGI), and Locality-specific Peripheral
|
|
Interrupts (LPI).
|
|
|
|
allOf:
|
|
- $ref: /schemas/interrupt-controller.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- items:
|
|
- enum:
|
|
- qcom,msm8996-gic-v3
|
|
- const: arm,gic-v3
|
|
- const: arm,gic-v3
|
|
|
|
interrupt-controller: true
|
|
|
|
"#address-cells":
|
|
enum: [ 0, 1, 2 ]
|
|
"#size-cells":
|
|
enum: [ 1, 2 ]
|
|
|
|
ranges: true
|
|
|
|
"#interrupt-cells":
|
|
description: |
|
|
Specifies the number of cells needed to encode an interrupt source.
|
|
Must be a single cell with a value of at least 3.
|
|
If the system requires describing PPI affinity, then the value must
|
|
be at least 4.
|
|
|
|
The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
|
|
interrupts, 2 for interrupts in the Extended SPI range, 3 for the
|
|
Extended PPI range. Other values are reserved for future use.
|
|
|
|
The 2nd cell contains the interrupt number for the interrupt type.
|
|
SPI interrupts are in the range [0-987]. PPI interrupts are in the
|
|
range [0-15]. Extented SPI interrupts are in the range [0-1023].
|
|
Extended PPI interrupts are in the range [0-127].
|
|
|
|
The 3rd cell is the flags, encoded as follows:
|
|
bits[3:0] trigger type and level flags.
|
|
1 = edge triggered
|
|
4 = level triggered
|
|
|
|
The 4th cell is a phandle to a node describing a set of CPUs this
|
|
interrupt is affine to. The interrupt must be a PPI, and the node
|
|
pointed must be a subnode of the "ppi-partitions" subnode. For
|
|
interrupt types other than PPI or PPIs that are not partitionned,
|
|
this cell must be zero. See the "ppi-partitions" node description
|
|
below.
|
|
|
|
Cells 5 and beyond are reserved for future use and must have a value
|
|
of 0 if present.
|
|
enum: [ 3, 4 ]
|
|
|
|
reg:
|
|
description: |
|
|
Specifies base physical address(s) and size of the GIC
|
|
registers, in the following order:
|
|
- GIC Distributor interface (GICD)
|
|
- GIC Redistributors (GICR), one range per redistributor region
|
|
- GIC CPU interface (GICC)
|
|
- GIC Hypervisor interface (GICH)
|
|
- GIC Virtual CPU interface (GICV)
|
|
|
|
GICC, GICH and GICV are optional, but must be described if the CPUs
|
|
support them. Examples of such CPUs are ARM's implementations of the
|
|
ARMv8.0 architecture such as Cortex-A32, A34, A35, A53, A57, A72 and
|
|
A73 (this list is not exhaustive).
|
|
|
|
minItems: 2
|
|
maxItems: 4096 # Should be enough?
|
|
|
|
interrupts:
|
|
description:
|
|
Interrupt source of the VGIC maintenance interrupt.
|
|
maxItems: 1
|
|
|
|
redistributor-stride:
|
|
description:
|
|
If using padding pages, specifies the stride of consecutive
|
|
redistributors. Must be a multiple of 64kB.
|
|
$ref: /schemas/types.yaml#/definitions/uint64
|
|
multipleOf: 0x10000
|
|
exclusiveMinimum: 0
|
|
|
|
"#redistributor-regions":
|
|
description:
|
|
The number of independent contiguous regions occupied by the
|
|
redistributors. Required if more than one such region is present.
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
maximum: 4096
|
|
|
|
msi-controller:
|
|
description:
|
|
Only present if the Message Based Interrupt functionality is
|
|
being exposed by the HW, and the mbi-ranges property present.
|
|
|
|
mbi-ranges:
|
|
description:
|
|
A list of pairs <intid span>, where "intid" is the first SPI of a range
|
|
that can be used an MBI, and "span" the size of that range. Multiple
|
|
ranges can be provided.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-matrix
|
|
items:
|
|
minItems: 2
|
|
maxItems: 2
|
|
|
|
mbi-alias:
|
|
description:
|
|
Address property. Base address of an alias of the GICD region containing
|
|
only the {SET,CLR}SPI registers to be used if isolation is required,
|
|
and if supported by the HW.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
items:
|
|
minItems: 1
|
|
maxItems: 2
|
|
|
|
ppi-partitions:
|
|
type: object
|
|
additionalProperties: false
|
|
description:
|
|
PPI affinity can be expressed as a single "ppi-partitions" node,
|
|
containing a set of sub-nodes.
|
|
patternProperties:
|
|
"^interrupt-partition-[0-9]+$":
|
|
type: object
|
|
additionalProperties: false
|
|
properties:
|
|
affinity:
|
|
$ref: /schemas/types.yaml#/definitions/phandle-array
|
|
items:
|
|
maxItems: 1
|
|
description:
|
|
Should be a list of phandles to CPU nodes (as described in
|
|
Documentation/devicetree/bindings/arm/cpus.yaml).
|
|
|
|
required:
|
|
- affinity
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
clock-names:
|
|
items:
|
|
- const: aclk
|
|
|
|
power-domains:
|
|
maxItems: 1
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
mediatek,broken-save-restore-fw:
|
|
type: boolean
|
|
description:
|
|
Asserts that the firmware on this device has issues saving and restoring
|
|
GICR registers when the GIC redistributors are powered off.
|
|
|
|
dependencies:
|
|
mbi-ranges: [ msi-controller ]
|
|
msi-controller: [ mbi-ranges ]
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
patternProperties:
|
|
"^gic-its@": false
|
|
"^interrupt-controller@[0-9a-f]+$": false
|
|
# msi-controller is preferred, but allow other names
|
|
"^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$":
|
|
type: object
|
|
description:
|
|
GICv3 has one or more Interrupt Translation Services (ITS) that are
|
|
used to route Message Signalled Interrupts (MSI) to the CPUs.
|
|
properties:
|
|
compatible:
|
|
const: arm,gic-v3-its
|
|
|
|
msi-controller: true
|
|
|
|
"#msi-cells":
|
|
description:
|
|
The single msi-cell is the DeviceID of the device which will generate
|
|
the MSI.
|
|
const: 1
|
|
|
|
reg:
|
|
description:
|
|
Specifies the base physical address and size of the ITS registers.
|
|
maxItems: 1
|
|
|
|
socionext,synquacer-pre-its:
|
|
description:
|
|
(u32, u32) tuple describing the untranslated
|
|
address and size of the pre-ITS window.
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
items:
|
|
minItems: 2
|
|
maxItems: 2
|
|
|
|
required:
|
|
- compatible
|
|
- msi-controller
|
|
- "#msi-cells"
|
|
- reg
|
|
|
|
additionalProperties: false
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
gic: interrupt-controller@2cf00000 {
|
|
compatible = "arm,gic-v3";
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
interrupt-controller;
|
|
reg = <0x2f000000 0x10000>, // GICD
|
|
<0x2f100000 0x200000>, // GICR
|
|
<0x2c000000 0x2000>, // GICC
|
|
<0x2c010000 0x2000>, // GICH
|
|
<0x2c020000 0x2000>; // GICV
|
|
interrupts = <1 9 4>;
|
|
|
|
msi-controller;
|
|
mbi-ranges = <256 128>;
|
|
|
|
msi-controller@2c200000 {
|
|
compatible = "arm,gic-v3-its";
|
|
msi-controller;
|
|
#msi-cells = <1>;
|
|
reg = <0x2c200000 0x20000>;
|
|
};
|
|
};
|
|
|
|
- |
|
|
interrupt-controller@2c010000 {
|
|
compatible = "arm,gic-v3";
|
|
#interrupt-cells = <4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
interrupt-controller;
|
|
redistributor-stride = <0x0 0x40000>; // 256kB stride
|
|
#redistributor-regions = <2>;
|
|
reg = <0x2c010000 0x10000>, // GICD
|
|
<0x2d000000 0x800000>, // GICR 1: CPUs 0-31
|
|
<0x2e000000 0x800000>, // GICR 2: CPUs 32-63
|
|
<0x2c040000 0x2000>, // GICC
|
|
<0x2c060000 0x2000>, // GICH
|
|
<0x2c080000 0x2000>; // GICV
|
|
interrupts = <1 9 4 0>;
|
|
|
|
msi-controller@2c200000 {
|
|
compatible = "arm,gic-v3-its";
|
|
msi-controller;
|
|
#msi-cells = <1>;
|
|
reg = <0x2c200000 0x20000>;
|
|
};
|
|
|
|
msi-controller@2c400000 {
|
|
compatible = "arm,gic-v3-its";
|
|
msi-controller;
|
|
#msi-cells = <1>;
|
|
reg = <0x2c400000 0x20000>;
|
|
};
|
|
|
|
ppi-partitions {
|
|
part0: interrupt-partition-0 {
|
|
affinity = <&cpu0>, <&cpu2>;
|
|
};
|
|
|
|
part1: interrupt-partition-1 {
|
|
affinity = <&cpu1>, <&cpu3>;
|
|
};
|
|
};
|
|
};
|
|
|
|
|
|
device@0 {
|
|
reg = <0 4>;
|
|
interrupts = <1 1 4 &part0>;
|
|
};
|
|
|
|
...
|