153 lines
4.7 KiB
YAML
153 lines
4.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7120-l2-intc.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Broadcom BCM7120-style Level 2 and Broadcom BCM3380 Level 1 / Level 2
|
|
|
|
maintainers:
|
|
- Florian Fainelli <f.fainelli@gmail.com>
|
|
|
|
description: >
|
|
This interrupt controller hardware is a second level interrupt controller that
|
|
is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
|
|
platforms. It can be found on BCM7xxx products starting with BCM7120.
|
|
|
|
Such an interrupt controller has the following hardware design:
|
|
|
|
- outputs multiple interrupts signals towards its interrupt controller parent
|
|
|
|
- controls how some of the interrupts will be flowing, whether they will
|
|
directly output an interrupt signal towards the interrupt controller parent,
|
|
or if they will output an interrupt signal at this 2nd level interrupt
|
|
controller, in particular for UARTs
|
|
|
|
- has one 32-bit enable word and one 32-bit status word
|
|
|
|
- no atomic set/clear operations
|
|
|
|
- not all bits within the interrupt controller actually map to an interrupt
|
|
|
|
The typical hardware layout for this controller is represented below:
|
|
|
|
2nd level interrupt line Outputs for the parent controller (e.g: ARM GIC)
|
|
|
|
0 -----[ MUX ] ------------|==========> GIC interrupt 75
|
|
\-----------\
|
|
|
|
|
1 -----[ MUX ] --------)---|==========> GIC interrupt 76
|
|
\------------|
|
|
|
|
|
2 -----[ MUX ] --------)---|==========> GIC interrupt 77
|
|
\------------|
|
|
|
|
|
3 ---------------------|
|
|
4 ---------------------|
|
|
5 ---------------------|
|
|
7 ---------------------|---|===========> GIC interrupt 66
|
|
9 ---------------------|
|
|
10 --------------------|
|
|
11 --------------------/
|
|
|
|
6 ------------------------\
|
|
|===========> GIC interrupt 64
|
|
8 ------------------------/
|
|
|
|
12 ........................ X
|
|
13 ........................ X (not connected)
|
|
..
|
|
31 ........................ X
|
|
|
|
The BCM3380 Level 1 / Level 2 interrrupt controller shows up in various forms
|
|
on many BCM338x/BCM63xx chipsets. It has the following properties:
|
|
|
|
- outputs a single interrupt signal to its interrupt controller parent
|
|
|
|
- contains one or more enable/status word pairs, which often appear at
|
|
different offsets in different blocks
|
|
|
|
- no atomic set/clear operations
|
|
|
|
allOf:
|
|
- $ref: /schemas/interrupt-controller.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
items:
|
|
- enum:
|
|
- brcm,bcm7120-l2-intc
|
|
- brcm,bcm3380-l2-intc
|
|
|
|
reg:
|
|
minItems: 1
|
|
maxItems: 4
|
|
description: >
|
|
Specifies the base physical address and size of the registers
|
|
|
|
interrupt-controller: true
|
|
|
|
"#interrupt-cells":
|
|
const: 1
|
|
|
|
interrupts:
|
|
minItems: 1
|
|
maxItems: 32
|
|
|
|
brcm,int-map-mask:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
description: >
|
|
32-bits bit mask describing how many and which interrupts are wired to
|
|
this 2nd level interrupt controller, and how they match their respective
|
|
interrupt parents. Should match exactly the number of interrupts
|
|
specified in the 'interrupts' property.
|
|
|
|
brcm,irq-can-wake:
|
|
type: boolean
|
|
description: >
|
|
If present, this means the L2 controller can be used as a wakeup source
|
|
for system suspend/resume.
|
|
|
|
brcm,int-fwd-mask:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
maxItems: 1
|
|
description: >
|
|
if present, a bit mask to configure the interrupts which have a mux gate,
|
|
typically UARTs. Setting these bits will make their respective interrupt
|
|
outputs bypass this 2nd level interrupt controller completely; it is
|
|
completely transparent for the interrupt controller parent. This should
|
|
have one 32-bit word per enable/status pair.
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupt-controller
|
|
- "#interrupt-cells"
|
|
- interrupts
|
|
|
|
examples:
|
|
- |
|
|
irq0_intc: interrupt-controller@f0406800 {
|
|
compatible = "brcm,bcm7120-l2-intc";
|
|
interrupt-parent = <&intc>;
|
|
#interrupt-cells = <1>;
|
|
reg = <0xf0406800 0x8>;
|
|
interrupt-controller;
|
|
interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
|
|
brcm,int-map-mask = <0xeb8>, <0x140>;
|
|
brcm,int-fwd-mask = <0x7>;
|
|
};
|
|
|
|
- |
|
|
irq1_intc: interrupt-controller@10000020 {
|
|
compatible = "brcm,bcm3380-l2-intc";
|
|
reg = <0x10000024 0x4>, <0x1000002c 0x4>,
|
|
<0x10000020 0x4>, <0x10000028 0x4>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupt-parent = <&cpu_intc>;
|
|
interrupts = <2>;
|
|
};
|