96 lines
2.4 KiB
YAML
96 lines
2.4 KiB
YAML
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/leds/skyworks,aat1290.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
|
|
|
|
maintainers:
|
|
- Jacek Anaszewski <jacek.anaszewski@gmail.com>
|
|
- Krzysztof Kozlowski <krzk@kernel.org>
|
|
|
|
description: |
|
|
The device is controlled through two pins:: FL_EN and EN_SET. The pins when,
|
|
asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
|
|
respectively. In order to add a capability of selecting the strobe signal
|
|
source (e.g. CPU or camera sensor) there is an additional switch required,
|
|
independent of the flash chip. The switch is controlled with pin control.
|
|
|
|
properties:
|
|
compatible:
|
|
const: skyworks,aat1290
|
|
|
|
enset-gpios:
|
|
maxItems: 1
|
|
description: EN_SET pin
|
|
|
|
flen-gpios:
|
|
maxItems: 1
|
|
description: FL_EN pin
|
|
|
|
led:
|
|
$ref: common.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
led-max-microamp: true
|
|
|
|
flash-max-microamp:
|
|
description: |
|
|
Maximum flash LED supply current can be calculated using following
|
|
formula:: I = 1A * 162 kOhm / Rset.
|
|
|
|
flash-max-timeout-us:
|
|
description: |
|
|
Maximum flash timeout can be calculated using following formula::
|
|
T = 8.82 * 10^9 * Ct.
|
|
|
|
required:
|
|
- flash-max-microamp
|
|
- flash-max-timeout-us
|
|
- led-max-microamp
|
|
|
|
pinctrl-names:
|
|
items:
|
|
- const: default
|
|
- const: host
|
|
- const: isp
|
|
|
|
pinctrl-0: true
|
|
pinctrl-1: true
|
|
pinctrl-2: true
|
|
|
|
required:
|
|
- compatible
|
|
- enset-gpios
|
|
- flen-gpios
|
|
- led
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
// Ct = 220 nF, Rset = 160 kOhm
|
|
led-controller {
|
|
compatible = "skyworks,aat1290";
|
|
flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
|
|
enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
|
|
|
|
pinctrl-names = "default", "host", "isp";
|
|
pinctrl-0 = <&camera_flash_host>;
|
|
pinctrl-1 = <&camera_flash_host>;
|
|
pinctrl-2 = <&camera_flash_isp>;
|
|
|
|
led {
|
|
function = LED_FUNCTION_FLASH;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
led-max-microamp = <520833>;
|
|
flash-max-microamp = <1012500>;
|
|
flash-max-timeout-us = <1940000>;
|
|
};
|
|
};
|