114 lines
2.7 KiB
YAML
114 lines
2.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
# Copyright (c) 2022 STMicroelectronics SA.
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/i2c/st,st-vgxy61.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: STMicroelectronics VGxy61 HDR Global Shutter Sensor Family
|
|
|
|
maintainers:
|
|
- Benjamin Mugnier <benjamin.mugnier@foss.st.com>
|
|
- Sylvain Petinot <sylvain.petinot@foss.st.com>
|
|
|
|
description: |-
|
|
STMicroelectronics VGxy61 family has a CSI-2 output port. CSI-2 output is a
|
|
quad lanes 800Mbps per lane.
|
|
Supported formats are RAW8, RAW10, RAW12, RAW14 and RAW16.
|
|
Following part number are supported
|
|
- VG5661 and VG6661 are 1.6 Mpx (1464 x 1104) monochrome and color sensors.
|
|
Maximum frame rate is 75 fps.
|
|
- VG5761 and VG6761 are 2.3 Mpx (1944 x 1204) monochrome and color sensors.
|
|
Maximum frame rate is 60 fps.
|
|
|
|
properties:
|
|
compatible:
|
|
const: st,st-vgxy61
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
VCORE-supply:
|
|
description:
|
|
Sensor digital core supply. Must be 1.2 volts.
|
|
|
|
VDDIO-supply:
|
|
description:
|
|
Sensor digital IO supply. Must be 1.8 volts.
|
|
|
|
VANA-supply:
|
|
description:
|
|
Sensor analog supply. Must be 2.8 volts.
|
|
|
|
reset-gpios:
|
|
description:
|
|
Reference to the GPIO connected to the reset pin, if any.
|
|
This is an active low signal to the vgxy61.
|
|
|
|
st,strobe-gpios-polarity:
|
|
description:
|
|
Invert polarity of illuminator's lights strobe GPIOs.
|
|
These GPIOs directly drive the illuminator LEDs.
|
|
type: boolean
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
additionalProperties: false
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
data-lanes:
|
|
description:
|
|
CSI lanes to use
|
|
items:
|
|
- const: 1
|
|
- const: 2
|
|
- const: 3
|
|
- const: 4
|
|
|
|
remote-endpoint: true
|
|
|
|
required:
|
|
- data-lanes
|
|
|
|
required:
|
|
- compatible
|
|
- clocks
|
|
- VCORE-supply
|
|
- VDDIO-supply
|
|
- VANA-supply
|
|
- port
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
vgxy61: csi2tx@10 {
|
|
compatible = "st,st-vgxy61";
|
|
reg = <0x10>;
|
|
clocks = <&clk_ext_camera>;
|
|
VCORE-supply = <&v1v2>;
|
|
VDDIO-supply = <&v1v8>;
|
|
VANA-supply = <&v2v8>;
|
|
reset-gpios = <&mfxgpio 18 GPIO_ACTIVE_LOW>;
|
|
port {
|
|
ep0: endpoint {
|
|
data-lanes = <1 2 3 4>;
|
|
remote-endpoint = <&mipi_csi2_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
...
|