184 lines
4.9 KiB
YAML
184 lines
4.9 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/mfd/actions,atc260x.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Actions Semi ATC260x Power Management IC
|
|
|
|
maintainers:
|
|
- Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
- Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
|
|
|
|
description: |
|
|
ATC260x series PMICs integrates Audio Codec, Power Management, RTC, IR
|
|
and GPIO controller blocks. Currently only the PM related functionalities
|
|
(i.e. regulators and system power-off/reboot) for the ATC2603C and ATC2609A
|
|
chip variants are supported.
|
|
ATC2603C includes 3 programmable DC-DC converters, 9 programmable LDO
|
|
regulators and 1 fixed LDO regulator.
|
|
ATC2609A includes 5 programmable DC-DC converters and 10 programmable LDO
|
|
regulators.
|
|
|
|
allOf:
|
|
- $ref: ../input/input.yaml
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- actions,atc2603c
|
|
- actions,atc2609a
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
reset-time-sec:
|
|
description: |
|
|
Duration in seconds which the key should be kept pressed for device
|
|
to reset automatically. The hardware default is 8. Use 0 to disable
|
|
this functionality.
|
|
enum: [0, 6, 8, 10, 12]
|
|
|
|
regulators:
|
|
type: object
|
|
description: |
|
|
List of child nodes specifying the regulators, depending on chip variant:
|
|
* ATC2603C: dcdc[1-3], ldo[1-3,5-8,11,12], switchldo1
|
|
* ATC2609A: dcdc[0-4], ldo[0-9]
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- actions,atc2603c-regulator
|
|
- actions,atc2609a-regulator
|
|
|
|
switchldo1:
|
|
type: object
|
|
$ref: ../regulator/regulator.yaml
|
|
|
|
properties:
|
|
regulator-name: true
|
|
regulator-boot-on: true
|
|
regulator-always-on: true
|
|
regulator-min-microvolt: true
|
|
regulator-max-microvolt: true
|
|
regulator-allow-bypass: true
|
|
regulator-active-discharge: true
|
|
|
|
additionalProperties: false
|
|
|
|
patternProperties:
|
|
"^(dcdc[0-4]|ldo[0-9]|ldo1[1-2]|switchldo1)-supply$":
|
|
description: ATC260x voltage regulators supplies
|
|
|
|
"^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$":
|
|
type: object
|
|
$ref: ../regulator/regulator.yaml
|
|
|
|
properties:
|
|
regulator-name: true
|
|
regulator-boot-on: true
|
|
regulator-always-on: true
|
|
regulator-min-microvolt: true
|
|
regulator-max-microvolt: true
|
|
regulator-allow-bypass: true
|
|
|
|
additionalProperties: false
|
|
|
|
allOf:
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: actions,atc2603c-regulator
|
|
then:
|
|
patternProperties:
|
|
"^(dcdc[0,4]|ldo[0,4,9])(-supply)?$": false
|
|
|
|
"^(ldo|dcdc)":
|
|
properties:
|
|
regulator-allow-bypass: false
|
|
- if:
|
|
properties:
|
|
compatible:
|
|
contains:
|
|
const: actions,atc2609a-regulator
|
|
then:
|
|
patternProperties:
|
|
"^(ldo1[1-2]|switchldo1)(-supply)?$": false
|
|
|
|
"^(dcdc|ldo[3-9])":
|
|
properties:
|
|
regulator-allow-bypass: false
|
|
|
|
required:
|
|
- compatible
|
|
|
|
additionalProperties: false
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pmic@65 {
|
|
compatible = "actions,atc2603c";
|
|
reg = <0x65>;
|
|
interrupt-parent = <&sirq>;
|
|
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
reset-time-sec = <6>;
|
|
|
|
regulators {
|
|
compatible = "actions,atc2603c-regulator";
|
|
|
|
dcdc1-supply = <®_5v0>;
|
|
dcdc3-supply = <®_5v0>;
|
|
ldo5-supply = <®_5v0>;
|
|
switchldo1-supply = <&vcc>;
|
|
|
|
vdd_cpu: dcdc1 {
|
|
regulator-name = "VDD_CPU";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <1400000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc: dcdc3 {
|
|
regulator-name = "VCC";
|
|
regulator-min-microvolt = <2600000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_3v1: ldo5 {
|
|
regulator-name = "VCC_3V1";
|
|
regulator-min-microvolt = <2600000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
sd_vcc: switchldo1 {
|
|
regulator-name = "SD_VCC";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|