147 lines
3.7 KiB
YAML
147 lines
3.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
|
|
|
|
maintainers:
|
|
- Steve Twiss <stwiss.opensource@diasemi.com>
|
|
|
|
description: |
|
|
For device-tree bindings of other sub-modules refer to the binding documents
|
|
under the respective sub-system directories.
|
|
Using regulator-{uv,ov}-{warn,error,protection}-microvolt requires special
|
|
handling: First, when GP_FB2 is used, it must be ensured that there is no
|
|
moment where all voltage monitors are disabled. Next, as da9063 only supports
|
|
UV *and* OV monitoring, both must be set to the same severity and value
|
|
(0: disable, 1: enable).
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- dlg,da9063
|
|
- dlg,da9063l
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
interrupt-controller: true
|
|
|
|
"#interrupt-cells":
|
|
const: 2
|
|
|
|
dlg,use-sw-pm:
|
|
type: boolean
|
|
description:
|
|
Disable the watchdog during suspend.
|
|
Only use this option if you can't use the watchdog automatic suspend
|
|
function during a suspend (see register CONTROL_B).
|
|
|
|
watchdog:
|
|
type: object
|
|
$ref: /schemas/watchdog/watchdog.yaml#
|
|
unevaluatedProperties: false
|
|
properties:
|
|
compatible:
|
|
const: dlg,da9063-watchdog
|
|
|
|
rtc:
|
|
type: object
|
|
$ref: /schemas/rtc/rtc.yaml#
|
|
unevaluatedProperties: false
|
|
properties:
|
|
compatible:
|
|
const: dlg,da9063-rtc
|
|
|
|
onkey:
|
|
type: object
|
|
$ref: /schemas/input/input.yaml#
|
|
unevaluatedProperties: false
|
|
properties:
|
|
compatible:
|
|
const: dlg,da9063-onkey
|
|
|
|
dlg,disable-key-power:
|
|
type: boolean
|
|
description: |
|
|
Disable power-down using a long key-press.
|
|
If this entry does not exist then by default the key-press triggered
|
|
power down is enabled and the OnKey will support both KEY_POWER and
|
|
KEY_SLEEP.
|
|
|
|
regulators:
|
|
type: object
|
|
additionalProperties: false
|
|
patternProperties:
|
|
"^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$":
|
|
$ref: /schemas/regulator/regulator.yaml
|
|
unevaluatedProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- interrupt-controller
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pmic@58 {
|
|
compatible = "dlg,da9063";
|
|
reg = <0x58>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-parent = <&gpio6>;
|
|
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-controller;
|
|
|
|
rtc {
|
|
compatible = "dlg,da9063-rtc";
|
|
};
|
|
|
|
watchdog {
|
|
compatible = "dlg,da9063-watchdog";
|
|
};
|
|
|
|
onkey {
|
|
compatible = "dlg,da9063-onkey";
|
|
dlg,disable-key-power;
|
|
};
|
|
|
|
regulators {
|
|
bcore1 {
|
|
regulator-name = "BCORE1";
|
|
regulator-min-microvolt = <300000>;
|
|
regulator-max-microvolt = <1570000>;
|
|
regulator-min-microamp = <500000>;
|
|
regulator-max-microamp = <2000000>;
|
|
regulator-boot-on;
|
|
};
|
|
ldo6 {
|
|
/* UNUSED */
|
|
regulator-name = "LDO_6";
|
|
regulator-uv-protection-microvolt = <0>;
|
|
regulator-ov-protection-microvolt = <0>;
|
|
};
|
|
ldo11 {
|
|
regulator-name = "LDO_11";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-uv-protection-microvolt = <1>;
|
|
regulator-ov-protection-microvolt = <1>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
...
|