97 lines
2.2 KiB
YAML
97 lines
2.2 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/net/actions,owl-emac.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Actions Semi Owl SoCs Ethernet MAC Controller
|
|
|
|
maintainers:
|
|
- Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
|
|
|
|
description: |
|
|
This Ethernet MAC is used on the Owl family of SoCs from Actions Semi.
|
|
It provides the RMII and SMII interfaces and is compliant with the
|
|
IEEE 802.3 CSMA/CD standard, supporting both half-duplex and full-duplex
|
|
operation modes at 10/100 Mb/s data transfer rates.
|
|
|
|
allOf:
|
|
- $ref: ethernet-controller.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
oneOf:
|
|
- const: actions,owl-emac
|
|
- items:
|
|
- enum:
|
|
- actions,s500-emac
|
|
- const: actions,owl-emac
|
|
|
|
reg:
|
|
maxItems: 1
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
minItems: 2
|
|
maxItems: 2
|
|
|
|
clock-names:
|
|
additionalItems: false
|
|
items:
|
|
- const: eth
|
|
- const: rmii
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
actions,ethcfg:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description:
|
|
Phandle to the device containing custom config.
|
|
|
|
mdio:
|
|
$ref: mdio.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
- clock-names
|
|
- resets
|
|
- phy-mode
|
|
- phy-handle
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/actions,s500-cmu.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/reset/actions,s500-reset.h>
|
|
|
|
ethernet@b0310000 {
|
|
compatible = "actions,s500-emac", "actions,owl-emac";
|
|
reg = <0xb0310000 0x10000>;
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cmu 59 /*CLK_ETHERNET*/>, <&cmu CLK_RMII_REF>;
|
|
clock-names = "eth", "rmii";
|
|
resets = <&cmu RESET_ETHERNET>;
|
|
phy-mode = "rmii";
|
|
phy-handle = <ð_phy>;
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
eth_phy: ethernet-phy@3 {
|
|
reg = <0x3>;
|
|
interrupt-parent = <&sirq>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
};
|