147 lines
2.9 KiB
Plaintext
147 lines
2.9 KiB
Plaintext
Lantiq GSWIP Ethernet switches
|
|
==================================
|
|
|
|
Required properties for GSWIP core:
|
|
|
|
- compatible : "lantiq,xrx200-gswip" for the embedded GSWIP in the
|
|
xRX200 SoC
|
|
"lantiq,xrx300-gswip" for the embedded GSWIP in the
|
|
xRX300 SoC
|
|
"lantiq,xrx330-gswip" for the embedded GSWIP in the
|
|
xRX330 SoC
|
|
- reg : memory range of the GSWIP core registers
|
|
: memory range of the GSWIP MDIO registers
|
|
: memory range of the GSWIP MII registers
|
|
|
|
See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of
|
|
additional required and optional properties.
|
|
|
|
|
|
Required properties for MDIO bus:
|
|
- compatible : "lantiq,xrx200-mdio" for the MDIO bus inside the GSWIP
|
|
core of the xRX200 SoC and the PHYs connected to it.
|
|
|
|
See Documentation/devicetree/bindings/net/mdio.txt for a list of additional
|
|
required and optional properties.
|
|
|
|
|
|
Required properties for GPHY firmware loading:
|
|
- compatible : "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw"
|
|
"lantiq,xrx300-gphy-fw", "lantiq,gphy-fw"
|
|
"lantiq,xrx330-gphy-fw", "lantiq,gphy-fw"
|
|
for the loading of the firmware into the embedded
|
|
GPHY core of the SoC.
|
|
- lantiq,rcu : reference to the rcu syscon
|
|
|
|
The GPHY firmware loader has a list of GPHY entries, one for each
|
|
embedded GPHY
|
|
|
|
- reg : Offset of the GPHY firmware register in the RCU
|
|
register range
|
|
- resets : list of resets of the embedded GPHY
|
|
- reset-names : list of names of the resets
|
|
|
|
Example:
|
|
|
|
Ethernet switch on the VRX200 SoC:
|
|
|
|
switch@e108000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "lantiq,xrx200-gswip";
|
|
reg = < 0xe108000 0x3100 /* switch */
|
|
0xe10b100 0xd8 /* mdio */
|
|
0xe10b1d8 0x130 /* mii */
|
|
>;
|
|
dsa,member = <0 0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "lan3";
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy0>;
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan4";
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy1>;
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan2";
|
|
phy-mode = "internal";
|
|
phy-handle = <&phy11>;
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "lan1";
|
|
phy-mode = "internal";
|
|
phy-handle = <&phy13>;
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "wan";
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy5>;
|
|
};
|
|
|
|
port@6 {
|
|
reg = <0x6>;
|
|
ethernet = <ð0>;
|
|
};
|
|
};
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "lantiq,xrx200-mdio";
|
|
reg = <0>;
|
|
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0x0>;
|
|
};
|
|
phy1: ethernet-phy@1 {
|
|
reg = <0x1>;
|
|
};
|
|
phy5: ethernet-phy@5 {
|
|
reg = <0x5>;
|
|
};
|
|
phy11: ethernet-phy@11 {
|
|
reg = <0x11>;
|
|
};
|
|
phy13: ethernet-phy@13 {
|
|
reg = <0x13>;
|
|
};
|
|
};
|
|
|
|
gphy-fw {
|
|
compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw";
|
|
lantiq,rcu = <&rcu0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
gphy@20 {
|
|
reg = <0x20>;
|
|
|
|
resets = <&reset0 31 30>;
|
|
reset-names = "gphy";
|
|
};
|
|
|
|
gphy@68 {
|
|
reg = <0x68>;
|
|
|
|
resets = <&reset0 29 28>;
|
|
reset-names = "gphy";
|
|
};
|
|
};
|
|
};
|